Mercedes Unimog, G-Wagen,
USA Phone: |
 |
|||||
Samstag Sales can supply you with a few selected tools for repair work on Mercedes Unimog, Sprinter and G-Wagen. A lot of items are special order. Please email for stock status. Please include a tool number when you email. Email us for a quote on any Unimog, Sprinter or G-Wagen tool!
|
||||||
| HOME | Mercedes Car |
Quick Search |
SEARCH |
email Samstag |
|
|
| Please Note: Our shopping cart is available for your convenience. The shipping is a flat rate calculated by value. Contact us for more shipping options. (Click for Shipping Rates & Info) | ||||||
| Last
Update: January 20, 2025 |
||||||
|
|
Quick Search |
| Quick Search |
|
Search
Tip: an easy way to search this
web page is to use the "Find in Page" feature built
into your browser. A fast way to open the search
box is to hold down your (CTRL) key and type the letter "F" on Windows. Or  +"F" keys on a Mac. |
|
Brand
|
Description |
Price |
||||
| ***************** |
|
|||||
| x |
|
|||||
| Matador 0428 01 45 655 589 00 61 00 |
Claw Wrench for Dryer
Cartridge. Heavy duty pattern for cartridge on
commerical vehicles with compressed air dryer. Made of special
steel and black phosphated. With 1/2" drive. Range
80-150mm, depth 65mm. For removal only, with CCW
operation. Similar to MAN tool number 8099606-0307   |
$371.50 | ||||
|
|
||||||
|
Price on
Request |
||||||
|
|
||||||
| 406 589 04 15 00 | Basic Drift
Axle. Length 200mm, Outside Flange Diameter 54mm, Rod
Diameter 28mm.   |
Price on
Request |
||||
| 424 589 00 15 00 | Spring
Compressor. |
Price
on
Request
|
||||
| 424 589 01 43 00 | Hub Reduction
Output Seal Install Tool.  |
Price on Request |
||||
| 460 589 00 07 00 | Mercedes 460 589 00
07 00 For inside nut on wheel hub and drive pinion on
G-Wagen type 460, 461, 463. With 3/4" drive, 43mm
outside, 36mm inside. With 4 fingers 8mm wide. Made by
HAZET of Germany. For old models up to August 1990.
Transmission 711.11
,Rear Axle 741.1 , Front Axle 730.3 NO Longer Available
|
|
||||
| Klann KL-0041-51 K |
Klann
KL-0041-51
K Wheel Bearing Tool Kit with 17t Hydraulic Cylinder,
Mercedes-Benz Vito/Viano/Sprinter, VW Crafter. Designed
for the front axle of Mercedes-Benz Vito/Viano(W639),
Sprinter (906), and VW Crafter (2E/2F) vehicles equipped
with rear-wheel drive. |
Price on
Request(More Info) |
||||
| Klann KL-1021-3236 A |
Klann
KL-1021-3236
A Clamp Nut Socket. Suitable for vans such as Mercedes
Sprinter (904) etc. Facilitates the professional
loosening and tightening of rectangular axle clamp nuts. |
Price on
Request |
||||
| ★ | ||||||
| FourM
4M-126 460 589 01 07 00 |
FourM 4M-126 Slotted Nut Wrench for nut on
axle shaft of Rear Axle 741, 741.1 , 741.5,
742.6. With 3/4" drive, 175mm long, inside diameter
65mm, tab width 8mm. Quality Made in Europe.
 |
|||||
| . |
||||||
| KLANN KL-0303-10 460 589 02 07 00 |
Klann 35x6 Small
Socket for front Axle Nut on G-Wagen W460, W461, W463
with type 730.3 front axle, 65mm long. 3/4" drive,
43mm outside, 35mm inside. With 4 fingers 6mm wide.
Used since
September of 1990. Discontinued.
See Also version below!   |
|
||||
| . |
||||||
| KLANN
KL-0303-11 463 589 00 07 00 |
Klann 38.5x6 Large Socket for
front Axle Nut on G-Wagen W460, W461, W463 Chassis.
Sprinter Model 903, 904, 909 with CODE ZG3 (all wheel
drive with gear reduction) , Sprinter Model 903, 904,
with CODE ZG1 (all wheel drive) , Sprinter Model 903,
904 with CODE ZG2 ( Permanent all wheel drive).
With 46mm outside diameter, 38.5mm inside diameter, 6mm
wide tabs. 1/2" drive. Front Axle 730.3 No Longer Available.  |
(Picture) |
||||
| ★ | ||||||
| Mercedes-Benz 463 589 00 07 00 |
Mercedes Factory Tool. 38.5x6
Large Socket for front Axle Nut on G-Wagen W460,
W461, W463 Chassis. Sprinter Model 903, 904, 909
with CODE ZG3 (all wheel drive with gear reduction)
, Sprinter Model 903, 904, with CODE ZG1 (all wheel
drive), Sprinter Model 903, 904 with CODE ZG2
(Permanent all wheel drive). With 46mm outside
diameter, 38.5mm inside diameter, 6mm wide tabs.
1/2" drive. Front Axle 730.3 This tool is no longer available from Mercedes.  |
|||||
| ★ | ||||||
| Mercedes-Benz 742 589 02 07 00 |
Rear Axle
Claw Socket Wrench. For removing the slotted nut of
the drive flange found on the drive pinion of the
drive axle. For rear axle type 771.011 and rear axle
type 771.181. With 6 tabs 8mm wide. Outside Diameter
74mm, Inside Diameter of tabs 55mm. With 1" inch
square drive, and hole to release the ratchet locking
pin. No Longer Available. See 4M brand tool below.
|
|||||
| FourM 4M-K74x55x8X6 Mercedes-Benz 742 589 02 07 00 |
Rear Axle Claw Socket Wrench. For removing the
slotted nut of the drive flange found on the drive
pinion of the drive axle. For rear axle type 771.011
and rear axle type 771.181. With 6 tabs 8mm wide.
Outside Diameter 74mm, Inside Diameter of tabs 55mm.
With 1" inch square drive, and hole to release the
ratchet locking pin.
|
$169.99 | ||||
| ★ | ||||||
| FourM 4M-125.2 906 589 00 07 00 |
FourM tool 4M-125.2 Pin
Wrench Socket 6 pin for Mercedes slotted nut on the
axle of type: (1.) 741.413, 741.414, 741.416, 741.420, 741.421, 741.422, 741.423, 741.453, 741.454 in the 906 chassis. (2.) And 741.413, 741.414, 741.420, 741.421, 741.455 in the chassis 900. (3.) 741.429 in Model 8AC906. Socket 3/4" drive. With 6 pins. Outside diameter 79mm at the pins, Inside diameter at the pins 67mm, Pin Width 8mm. Tube Diameter 41mm.  |
$179.50 |
||||
| ★ | ||||||
| KLANN Axle Sockets |
 Special Order. Price on Request. |
Download Catalog |
||||
| Belt | ||||||
| Klann KL-0384-1 |
Klann
KL-0384-1
Tension Tool. Used to relieve pressure on the timing
belt by pushing back the automatic idler pulley. This
tension tool makes light work of this difficult job, it
is operated by a 3/8" ratchet or breaker bar. Suitable
for Mercedes transporters series 208 D to 410 D with
engine types OM601 and OM602 and also for Mercedes
passenger cars with hydraulic pump for self-leveling
suspension. Due to the extremely limited space
available, in particular on Transporter models, it is
very difficult to push back the automatic tensioner
pulley in order to change the V-ribbed belt. Special Order. |
$136.07 |
||||
| 906 589 04 63 00 |
OM642 Assembly
Tool Power Belt |
Price on Request |
||||
| Books |
||||||
| 6450 001810 | Spare Parts III Unimog 403/ U800. This
catalog of illustration for chassis/units has been
compiled to help you find and order the spare parts
needed for the maintenance/repair of your Mercedes Benz.
Only One Left. |
$29.99 | ||||
| 6450 001900 | Motor M 180.92/94/95. This catalog of
illustration for the motor has been compiled to help you
find and order the spare parts needed for the
maintenance/repair of your Mercedes Benz. Only One Left  |
$29.99 | ||||
| 6550-6373-02 | Mercedes Benz Operating
Instructions for truck types: 2028, 2033, 2036, 2222,
2225, 2228, 2233, 2236, 2238, 2628, 2633, 2636, and
2638. Only One
Left. |
$29.99 |
||||
|
|
||||||
| Mercedes-Benz
000 589 00 40 00 |
Sliding Bracket
Pressing Device, used to adapt the brake caliper press
to Unimog piston. |
|||||
| Mercedes-Benz
406 589 08 43 00 |
Pressing Disk, "Einpresswerkzeug", used to adapt the brake caliper press to the Unimog piston. |
Price On
Request |
||||
| Mercedes-Benz
406 589 09 43 00 |
Pressing Disk "Einpresswerkzeug", used to adapt the brake caliper press to the Unimog piston. | |||||
|
|
||||||
|
|
||||||
| Gedore KL-0500-45 KA |
Gedore
KL-0500-45
K. The KL-0500-45 K clutch tool set is indispensable for
the professional removal and installation of
Self-Adjusting Clutches (SAC). Suitable for SAC clutches
(6 bolt holes); e.g. VW Audi, BMW, Mercedes, Volvo,
Opel/Vauxhall, Renault etc.  |
Price on Request |
||||
| Mercedes-Benz
|
Clutch align tool.
For 403, 404, 406, 411, 413, 416, 421, 440, 441. Special
Order Only. |
Request |
||||
|
|
||||||
|
|
||||||
| 470
589 01 37 00 KLANN KL-0121-96 |
Pliers for clamps on water
lines of the engine. |
See
Klann Page |
||||
| 611 589 00 40 00 | Counter Holder for cooling
pump used when removing the viscous fan on Sprinter.
Engines 611.981/987, 612.985/966/981, 647.981, 646,
611, 612, 642. Length 410mm with 39mm bolt spacing. |
Price on Request |
||||
| KLANN KL-0181-93 |
Klann KL-0181-93
Puller for Oil Jet Nozzles used for piston cooling. For
OM611, OM612, OM613. Click for a larger view. Special Order.
Klann does not make an install tool. See Chrysler 8942. |
$2,125.42 |
||||
| Crank Assembly | ||||||
| Gedore KL-0363-2 A 407 589 00 63 00 |
This is the
new version of the flywheel rotating tool with 2 gear wheels.
Engine Barring Tool. This tool is used to allow
precise positioning of the crankshaft for timing
purposes. Used on Mercedes trucks models. Applicable
to Mercedes trucks equipped with either a 6-, 8- or
10-cylinder engine; MAN trucks equipped with a
12-cylinder engine. (Engine codes: Mercedes OM401,
OM402, OM403, OM409, OM421, OM422, OM423, OM429,
OM441, OM442, OM444, OM446, OM447, OM457, OM489,
OM541, OM542; MAN D2842) Discontinued.  |
(Picture) |
||||
| Gedore KL-0363-3 A 904 589 04 63 00 |
Flywheel
rotating tool with 3 gear wheels, and using longer mounting
bolts. Engine
Barring Tool. This
tool is used to allow precise positioning of the
crankshaft for timing purposes. New version tool with 1/2" female
square drive. Used on Mercedes
trucks. Applicable to Mercedes trucks equipped with
either a 4-, 6- or 8-cylinder engine; MAN trucks
equipped with either a 5-, 6- or 8-cylinder engine.
(Engine codes: Mercedes OM457, OM541, OM542, OM902,
OM904, OM906, OM924, OM926; MAN D25, D28) |
$492.56 |
||||
| Klann KL-0363-4 |
Flywheel-Rotating Tool with
one Sprocket. Suitable for the MAN
engines D20..., D25..., D26..., D28...
*Special Order. |
$202.58 (Picture) |
| ***************** |
|
************
|
| HAZET
2850-E20 |
Cylinder head socket for screws on
MAN commercial vehicles M2000 and MAN buses with D
08 Engine. This socket is E20 with 3/4" drive and
110 mm long. |
$114.10 (Picture) |
| HAZET
2850-E24 |
Cylinder head socket for screws on
MAN (D20) common rail commercial engine. This socket
is E24 with 3/4" drive and 110mm long. |
$115.80 (Picture) |
|
2758-17 403 589 02 03 00 |
Cylinder head socket
for screws on engine M401, 404, 407-409, 421-424,
427, 428, 444, 447. This socket is 12 point 17mm
with 1/2" drive. Discontinued, No Longer Available.  |
|
| Matador 7083 00 03 422 589 01 09 00 |
Special 12 point 17mm impact socket 3/4"
drive. For cylinder head bolts on Mercedes Benz
engines 400, 420 and 500. Length 110mm (4-5/16" inch). Discontinued - Limited Quantity  |
|
| xxxxxxxxxxxxxxxx |
|
|
| KLANN KL-0186-14 K |
 Universal Injector Nozzle
Puller Set. For Sprinter OM642 V6 DOHC 3.0L Diesel.
For Mercedes OM611, OM612, OM613, OM628*, OM629*,
OM42*, OM646, OM647, OM648 engine. *Note: Due to limited space
use of this tool might require removal of the
engine. Special Order. CALL or eMail
for your discount
price!
|
$1,623.86 |
| 4M-096.2 | Here is a special tool
used to pull difficult to remove injector nozzles.
Good for Mercedes Sprinter 5 Cylinder Diesel 2.7L
engine, OM 647 CDI. Also for OM611, OM612,
OM613, OM646*, OM648. *NOT OM646 EVO. A quality tool
made by (MMMM) Brand from Europe. FourM part 4M-096.2.
This tool has a chrome finish. It is for hand use
only, not for impact use. |
SEE Mercedes Car Page |
| ★ | ||
| Klann KL-0369-601 403 589 05 07 00 |
Crown Socket
for nozzle holder in MAN and MB Diesel engines. Four
tabs, drive size 32mm with counter thread.
Chrome-Vanadium 70mm Long. The
counter nut has M14x1.5mm threads and drive size
22mm. The outside diameter of the socket is 28.5mm,
and the tabs are 8mm wide. Tightening the hexagon
counter nut prevents the pin wrench from sliding
off. Please measure your engine. Equivalent to MAN number 80.99603.0049
 |
$69.99 (Picture) |
| KL-0369-602 | Klann Special
4-Pin Socket for the injection nozzle holder nut. This
socket is hollow inside to allow the needle sensor
cable and plug to fit inside. Used on MAN,
Neoplan, Setra, etc. Special
Order  |
$73.78 (Picture) |
| . |
||
| FourM 4M-043.1 442 589 00 07 00 |
Socket for the nozzle
holder nut on Mercedes 400 Series Diesel Engines.
With 32mm drive. Extra deep 120mm long with 4 tabs
that are 8mm wide. Outside diameter 28.5mm, inside
diameter 22mm. Equivalent to MAN number 80.99603.0240. Similar to old KLANN number KL-0369-603
|
$69.99 (Picture) |
| Hazet 4558 403 589 04 07 00 |
Hazet 4558 Crown socket, 1/2" drive, with 4
pins 8mm wide, for push bolts at the nozzle holders in
diesel engines. 72mm long. Diesel Engine type
OM401/421, OM402/422, LA,A, OM403/423, Om470h. Similar
to MAN No. 80.99603-0121. |
$94.99
(Picture) |
|
|
||
|
9785 |
Carl Walter 12 Volt test light, good for tail
lights and general wiring. Not for electronic
components. Made from Brass.  |
|
|
|
||
| . | ||
|
|
||
| A special 12 point 19mm impact socket for
balance wheel and vibration shock on Mercedes Benz
engines 300, 400 and 900. Chrome-Vanadium steel with
surface that is burnished and blackened. Discontinued - Only one in stock.  |
||
| KLANN KL-0175-90 |
Klann
KL-0175-90 Cylinder Liner Puller. For cylinder liners
60-160mm. {Click for large view}
|
Price on Request |
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
| ESGEN 12937-9 |
CLIC Pliers. For CLIC
Clamps found on fuel lines. Similar to Mercedes Number
171 589 00 37 00 with swivel jaws.
Also with fixed jaws HAZET 798-2
pliers. |
See Esgen Click Here |
| 4M-087 |
4M-087 Special
34 tooth socket for pressure valve of Bosch Diesel
Injection Pump. Chrome plated. It is 1/2" drive and
about 60mm (2-3/8" inch) long. It is about 22mm
diameter inside the socket at the longest distance. This 34 spline tooth socket
is for trucks. High quality. Made by (MMMM)
Brand from Europe. Please Note: This socket has 34 splines,
it will NOT fit the Automotive diesel engines that
have 33 splines!
 |
$49.95 (Picture) |
| Hazet 2168-46 | AdBlue® Filter Wrench. This
wrench is for the operation of the filter housing cap
when replacing the AdBlue® filter. Applicable on
Mercedes-Benz commercial vehicles that have the
BlueTec® engines such as Actros, Atego, Axor, Econic.
3/8" drive 46mm opening. Made in Germany.  |
$90.10 |
| Hazet 2757-14 | 12 point socket 14mm
open-ring, for the screws at the injection lines on
Mercedes Benz Sprinter. 3/8" drive, length 85mm. *No Longer
Available. See HAZET
4550-5. |
|
|
|
Mercedes Benz number 314
589 01 03 00 open 12 point socket for
injection lines of engine 314, 352, 362, 470, 471,
472, 473, 933, 934, 935, 936. Also Guide tube of oil
dipstick. Size 19mm, 1/2" drive, 120mm in length. |
|
Mercedes Benz 203 589 01 07 00 |
Fuel pump sending unit claw
wrench, 4 prong. For chassis 163, 203. |
Price On Request |
| Glow Plug |
||
| Klann KL-0369-30 K |
Broken Glow Plug
Repair Kit. OM 611, OM612, OM613, OM646
but not OM646 EVO engine, OM647, OM648. For
example Mercedes Sprinter I5 DOHC 20V 2.7L engine.
To
see a video
of the tool in use, click here.
Please Note: The
video shows some tools that are*Call for your discount price!  not included in this kit. To see the Scope of Delivery with the contents of the kit, click here. |
See Mercedes Page |
| Klann KL-0369-33 K |
Broken Glow Plug Repair Kit for Mercedes
CDI diesel engine OM640 and OM642 with glow plug thread
M8x1. As found in Sprinter with V6 , 24 Valve, 3.0
Liter with OM642 diesel engine. *Call for your discount price!  |
See Mercedes Page |
| xxxxxxxxxxxxxxxx |
|
|
| Stahlwille 440-30 |
Stahlwille
Flare
nut Spanner 30mm, 1/2" drive. For hydraulic lines.  |
|
| Oil
Service |
||
| Hazet 2169-11 642 589 00 09 00 |
Hazet
Oil Filter Wrench, 84mm, 14
point, 1/2" drive and 24mm outside hex drive. For
Mercedes-Benz diesel engines 3.0 L V6, engine 642,
Sprinter Diesel, C-class, ML 320 CDI, GL 320 CDI, R320
CDI, E320 Bluetec. Also for Jeep Grand Cherokee 3.0 V6
Diesel. |
See HAZET Page |
|
|
|
|
| KLANN KL-0181-93 |
Puller
for
Piston
Oil Jet Nozzles. See KLANN KL-0181-93 click here |
|
| Wilbär 8380 000 589 37 37 00 |
Piston Ring pliers with replaceable tips.
Spring return handle. With stop screw and gap gauge.
 |
Mercedes Page |
| Wilbär 8380e | Piston ring plier replacement tips. Sold in
pairs. For the Mercedes 000
589 37 37 00 pliers.  |
Mercedes Page |
|
|
||
|
|
||
|
|
||
| Klann KL-0167-15 A |
Klann KL-0167-15 A
Universal Wrench for Inner Track Rod Joint. Universally
suitable for all inner track rod joints with a sperical
head. The ideal tool Mercedes Sprinter, VW Crafter. |
Price
on
Request |
| Mercedes-Benz
318 589 00 35 00 |
Pitman Shaft Puller. Extra Heavy. Special
cut-out bottom. Ships 6 pounds. Special
Order.
  |
|
|
|
||
| Klann KL-0165-35 |
Klann
KL-0165-35 Ball Joint Extractor. Suitable for use on
suspension ball joints found on Mercedes Sprinter
(1995 onwards) and VW LT (1998 onwards); upper ball on
VW T4, stabiliser ball joints on Mercedes Citaro
EvoBus O 530 etc. Fork opening, 33mm. |
Price
on
Request |
| KUKKO 127-3 |
Kukko 127-3 Ball joint
extractor, working width 34mm, height 63mm. For VW
Touareg, years 2003-2009; Mercedes
Sprinter; VW-LT 1998; Fiat Ducato 1994 |
SEE KUKKO Page |
| Mercedes-Benz 730 589 02 33 00 |
Mercedes 730 589 02 33 00
Sprinter front lower suspension ball joint tool. Type
900, 901, 902, 903, 904, 906, with specific axles.
Please check your service information. |
Price on Request |
|
|
||
| FourM 4M-006.1 |
FourM 4M-006.1 Mercedes Van
differential socket. Chrome plated. Turn with your
32mm wrench or socket. Please compare to your size
before ordering. The center hole is 16mm.  |
$89.99 |
| FourM 4M-006.2 |
FourM 4M-006.2 Mercedes
G-Class differential flange removal socket. Chrome
plated. Turn with your 32mm wrench or socket. Please
compare to your size before ordering. See chart below.
The center hole is 16mm.   |
$89.99 |
| HAZET 2716-1 620 589 01 09 00 |
HAZET 8 point,
27mm Socket with 1/2" drive, 60mm in length. Used
for the reverse gear switch on SK series, Actros
and MAN commercial vehicles. Also for axle switch on
M463 with transfer case 750.65. Special
Order.
 |
Price
on Request |
|
|
|
|
| HAZET 2769-1 421 589 00 01 00 |
HAZET Diesel Engine Valve Adjust Set of 2
Wrenches. Note:
You may also need the 2769-3 wrench that is not
supplied with this set. *NO LONGER AVAILABLE!!  |
|
| Mercedes-Benz 422 589 00 11 00 |
Mercedes Benz
Valve Adjust Tool for old Diesel Engine. About 11"
long. With Slotted tip screwdrier inside a
movable tube. With the tube inside a 12 point 17 mm
socket. Large 7 point knob for turning the
screwdriver. We only have one tool to offer at this
price. NSN # 5120-12-325-5628 (5120123255628) Samstag Sales CAGE code on request.    |
|
| HAZET 2770-2 HAZET 329-2 000 589 39 07 00 |
HAZET Crowfoot Wrench 14mm with 1/2" drive.
For valve adjustment on older 6-cyl gas engine cars
with M180 engine and Unimog 404. Around 110mm long
overall. *NO
LONGER AVAILABLE. NOTE: We may have a New Old Stock or Used tool available on our Mercedes Automotive Tools page, to check availability click here. |
|
|
|
||
|
|
||
|
|
||
| HAZET 2593-50 364 598 00 01 00 |
Special thin 50mm wrench for the counter nut
of the oil separator on commercial vehicles with
engine OM364A, OM 364LA, 611D, 614D, 711D, 714D,
811D, 814D, 814DA *NO LONGER AVAILABLE. |
|
|
|
|
| HOME | Quick Search | SEARCH | email Samstag | How To Order |
|
