STAHLWILLE Tools

Stahlwille Tool Logo


Samstag Sales-Authorized Stahlwille Tool Dealer
USA ☎
(615)-735-3388
STAHLWILLE is a family owned business founded in 1862 by Eduard Wille. "Stahl" is the German word for Steel.  Put them together and you have the company name STAHLWILLE. Samstag Sales is an authorized independent distributor of STAHLWILLE German hand tools. If not in stock we can special order any STAHLWILLE tool.
STAHLWILLE PliersSTAHLWILLE WrenchSTAHLWILLE_Tool_Box.jpgStahlwille_RatchetStahlwille_Screwdriver.jpg

HOME Quick
Search
SEARCH
email
Samstag
How To Order
VDE
Tools

FREE Shipping! Buy a small amount of in stock items using our shopping cart, and get free shipping to the lower 48 States.
(Click for Shipping Rates & Info)
.Last STAHLWILLE Update: April 21, 2025
     

  Quick Search
Quick Search
About STAHLWILLE Oil Bottles Wrench-Combination-SAE-Short
Adapters Pick-Up Tool Wrench-Combination-Metric-Long
Air Conditioning Pliers Wrench-Crowfoot Spanner
Aircraft/Aerospace Pliers - Circlip Wrench-Double Box - Deep Offset
Battery Tools Pliers - Snap Ring Wrench-Double Box - Shallow Offset
Body Tools Punch Wrench-Double Box - Flat -  SALE!
Box Spanner Ratchets
[ 1/4" ] [ 3/8" ]
[ 1/2" ]
[ 3/4" ]
Wrench-Double Open
Brake Tools RIBE Sockets Wrench-Electric
Brushes Rule Wrench-Flare Nut
Crowfoot Sockets Tap Holder Wrench - Heavy Duty - Ring- Type 5
Crow-Ring Spanners Screwdrivers Wrench- L Key - Torx
Electrical Tools Screwdriver -   SALE! Wrench-Obstruction
Engine
Snap Ring Pliers
Wrench - Pipe
Extension Bars Sockets 1/4" Wrench- Ratcheting Combination
Feeler Gauge Socket Set 1/4" Wrench-Single Open End
File Sockets 3/8" Wrench-Slugging-Box End-Heavy Duty
Flare Nut Socket Sockets 1/2" - SALE! Wrench-Slugging-Box End
Flare Nut Wrench Sockets 3/4" Wrench-Slugging-Open End
Fuel System Spark Plug Wrench-Torque-Adapters
Gear Pullers - 2 Arm Stud Remover Wrench-Torque - Type 721
Gear Pullers - 3 Arm Suspension Wrench-Torque - Type 730
Hammers Test Light Wrench-Torque - Type 730D
Hacksaw Thread Pitch Gauge Wrench-Torque - Type 730N
Hex Key Tool Box Wrench-Torque-Insert Tools
Hex Key - Ball End Tool Roll Wrench-Torque-Insert-Formula
IMPACT Tool
Torque Multiplier Wrench-Torque-Insert-Tool-Blank
Internal Bearing Puller Triple Square Wrench-Torque Multipliers
Kabelex Pin Tools VDE Tools
Wrench-Torx
Machine Shop
XZN
Measuring Tape Wrench-Adjustable
Nut Drivers Wrench-Box Spanner
Oil Service Wrench-Combination-Metric-Short
Search Tip: an easy way to search this web page is to use the "Find in Page" feature built into your browser. A fast way to open the  search box is to hold down your (CTRL) key and type the letter "F" on Windows.  Or  +"F" keys on a Mac.

.

SW# Stahlwille Tools DESCRIPTION PRICE
**************
Adapters
.
409 STAHLWILLE 409 Plug Adapter, 1/4" Socket x 3/8" Plug, 25mm long. (11030002)

$23.00
513 STAHLWILLE 513 Plug Adapter, 1/2" Socket x 3/8" Plug. 35mm long. (13030002)

$26.00
514 STAHLWILLE 514 Plug Adapter, 1/2" Socket x 3/4" Plug. 44mm long. (13030005)

$32.00

.
Air Conditioning Tools
.
See Crow-Ring Spanners

.
Aircraft/Aerospace
.

50A-19/32
STAHLWILLE 50A-19/32 Socket 1/2" Drive for aircraft-19/32. Chrome. (3410035)

$21.00
(Picture)

50A-25/32
STAHLWILLE 50A-25/32 Socket 1/2" Drive for aircraft-25/32. Chrome. (3410041)

$23.00
51aP-25/32
Socket Extra Deep 25/32” with extra bolt clearance.Made with HPQ high performance steel, gunmetal finish. For the brakes on Airbus A320 and A321. (3421041)

Price on Request

(Picture)
13214a STAHLWILLE 13214a Line maintenance set in tool box number: 13216/4. For maintenance on aeroplanes and helicopters. Aviation Tool Set 123 pcs. Code # 98814801 Price on Request
13214a WW
STAHLWILLE 13214a WW Line maintenance set. For maintenance on aeroplanes and helicopters. Aviation Tool Set 122 pcs. Code # 97830802
Price on Request
13214
STAHLWILLE 13214 Line maintenance set in tool box No. 13216/4. For maintenance on aeroplanes and helicopters. Aviation Tool Set 122 pcs. Code # 98814803
Price on Request
13214 WW
STAHLWILLE 13214 WW Line maintenance set. For maintenance on aeroplanes and helicopters. Aviation Tool Set 121 pcs.  Code # 97830803
Price on Request
13214 WT/LR
STAHLWILLE 13214 WT/LR Line maintenance set in tool trolley No. 13217. For maintenance on aeroplanes and helicopters. Aviation Tool Set 121 pcs. Code # 98814905
Stahlwille 13214 WT/LR Line Maintenance Set
                      in Tool Trolley
Price on Request
13224a WT/TS
STAHLWILLE 13224a WT/TS AOG- Kit for aeroplanes in tool trolley No 13217. For maintenance on aeroplanes and
helicopters. 154 pcs. Code # 98814910
Price on Request
13221 WT/TS
STAHLWILLE 13221 WT/TS AOG- Kit for aeroplanes in tool trolley No 13217. For maintenance on aeroplanes and
helicopters. 163 pcs.
Price on Request
13220 STAHLWILLE 13220 Special Extension, for removing Boroscope plugs on EJ200 jet engines, (Eurofighter), with Boroscope plug locking and external hexagon SW16 mm. Aerospace item Special order (12270020).
$465.00
6575 1 220 STAHLWILLE 6575 1 220 Wire twisting pliers 230mm long. Lockwire Pliers. (65751220)
Stahlwille 6575 1 220 Wire Twist Pliers
Price on
Request
6575 1 280 STAHLWILLE 6575 1 280 Wire twisting pliers 280mm long. Lockwire Pliers. (65751280)
Price on
Request
(Picture)
6576 5 231 STAHLWILLE 6576 5 231 Connector Pliers with protective jaws. For screw on Canon [Cannon] type connectors. 230mm long. (65765231)
$138.00
(Picture)

.
Battery Tools




.

Body Tools
.
10351N STAHLWILLE 10351N Windshield Removal Kit. (96742711)
$245.00
10865 STHALWILLE 10865 Heel Dolly. Size 80mm x 60mm x 35mm. Weight 1070 g. (70210012)
$121.00
(Picture)

12770-2K STAHLWILLE 12770-2K Door Panel Remover Tool, Length 250mm. (74593101)
Stahlwille 12770-2K Door Panel Remover Tool
$55.00
(Picture)
12770-3 STAHLWILLE 12770/3 Special plastic trim removal tool.45mm wide, 300mm long. 15mm thick. With soft rubber feet. (74590003)
$113.00
(Picture)

.

Brake Tools
.
1029 STAHLWILLE 1029 Brake Adjusting Lever, good for old VW **No Longer Available**
$41.99
(Picture)
12371-2K Stahlwille 12371-2K Brake Caliper File 260mm in length (74543101)

$105.00
12373 STAHLWILLE 12373 Steel Wire Brush-extra thin for cleaning brake calipers. (77440001)
$29.00
(Picture)



.
Crow-Ring Spanners
.
Type
440
Type 440 Crow-Ring Spanners. Available in size 8mm to 50mm. Call or email for a quote on additional sizes.
More
Information

440-17 STAHLWILLE 440-17 Crow Ring Spanner 3/8" dr 17mm, 39.2mm in length with an opening of 14mm. 40g (2190017).  
Stahlwille 440-17 Crow Ring Spanner
$116.00
(Picture)
440-19 STAHLWILLE 440-19 Crow Ring Spanner 3/8" dr 19mm, 40.5mm in length with an opening of 15.8mm. 40g (#02190019) 
$112.00
(Picture)
440-22 STAHLWILLE 440-22  Crow Ring Spanner 3/8" dr 22mm, 45.3mm in length with an opening of 17mm. 57g (#02190022)
Mercedes 000 589 71 03 00
$117.00
(Picture)
440-24 STAHLWILLE 440-24  Crow Ring Spanner 3/8" dr 24mm, 47.3mm in length with an opening of 18mm. 57g (#02190024)
$117.00
(Picture)
440-30
STAHLWILLE 440-30 Crow Ring Spanner 1/2" dr 30mm, 63mm in length with an opening of 22mm. 155g  (#03190030). 
$147.00
(Picture)

440-36 STAHLWILLE 440-36 Crow Ring Spanner 1/2" dr  36mm, 66.5mm in length with an opening of 27mm. 150g  (#03190036) $158.00

.
Electrical Tools
.
1560 STAHLWILLE 1560 KN Tool Set KABELEX. 10 pieces for round plug connections (including ABS).
(96747201)

  • One each of No 1501, 1502, and 1503 ejection tools for contact sizing, 1.5, 3.5, & 4.0 mm
  • Two each of No 1511, 1512, and 1513 dismantling sleeves for contact sizing 1.5, 3.5, & 4.0 mm
  • One No 1523 assembly sleeve (ABS)
$443.00

1570/2 STAHLWILLE 1570/2 KN Universal Set, KABELEX. 12 pieces. (96747304)

  • One each of No 1501, 1502, 1505 ejection tools for contact sizing, 1.5, 3.5, & 2.3 mm
  • One each of No 1511, 1512, 1515 dismantling sleeves for contact sizing, 1.5, 3.5, & 2.3 mm
  • No 1553 cable extractor tool for plugs with one release channel, 2.8 & 5.8 mm
  • No 1556 cable extractor tool for Micro-Timer ll, lll contacts, 1.6 mm
  • No 1559 cable extractor tool for Maxi-Power Timer contacts, 9.5 mm
  • No 1562 cable extractor tool for Pit-Pod contacts
  • No 1574 cable extractor tool for Micro-Timer I contacts and ABS plug-in housing, 1.6mm
  • No 1591 cable extractor tool for plugs with two release channels, 2.8 & 5.8mm
$1,053.00
1700 MAN/Volvo

STAHLWILLE 1700 Tool Set KABELEX, 14 pieces, for MAN/Volvo, Mercedes-Benz trucks (96747208)
  • One each of No 1501, 1502, 1503, 1506 ejection tools for contact sizing, 1.5, 3.5, 4.0 (ABS), & 4.0mm
  • One each of No 1511, 1512, 1513, 1516 dismantling sleeves for contact sizing, 1.5, 3.5, 4.0 (ABS), & 4.0mm
  • No 1523 assembly sleeve (ABS)
  • One each of No 1553 & 1591 cable extractor tools for contact sizes 2.8 & 5.8mm
  • No 1576 cable extractor tool for flat plugs without box, 2.8mm
  • No 1577 cable extractor tool for VKR Box contacts
  • No 1577-1 cable extractor tools for MKR/MKS contacts 1.5mm
$1,300.00
1730 
STAHLWILLE 1730 Tool Set KABELEX. 16 pieces, for Porsche **Discontinued as a set. Individual tools are still available.
    • No 1504, 1509 ejection tools for contact sizing, 2.5 & 2.3 mm
    • No 1514, 1519, dismounting bushes for contact sizing 2.5 & 2.3 mm
    • No 1555-2-P, 1556-3P, 1575-1P, 1575-2P, 1576-1P, 1576-2P, 1577-2P: cable extractor tools for flat plug-in sockets
    • No 1562 cable extractor tool for Pit-Pod-contacts
    • No 1587 cable extractor tool for flat plug-in sockets E-95 contacts, 1.65mm
    • No 1574 cable extractor tool for Micro-Timer l contacts & ABS plug-in 1.6mm
    • No 1591, cable extractor tool for contact sizing 2.8 and 5.8 mm 
    • 1 application documentation
$1,395.52
KABELEX Survey of the range of available KABELEX tools.
More Info
13207an
Electricians tool set in case 13209.  111 Tools.
(Contents) STAHLWILLE Order Code: 98810322
Call or eMail for your discount price.

Stahlwille 13207a Electricians tool set, 111
                      tools
$4,274.00
(Picture)






.
Engine Tools
.
904 Adjustable Stud Remover. Good for inch or metric. 6-12mm. With 3/8" drive. You must have at least 3mm of the stud protruding.  (71340000). No Longer Available.

$398.62
10676-2K STAHLWILLE 10676 Engineer's Bearing Scraper. Three Square. 315mm (12-1/2") long. Used in the old days for poured Babbitt bearings. Still useful around the shop. (72083103)
Stahlwille 10676 Enginee's Bearing Scraper
$34.00
(Picture)

11069-1 STAHLWILLE 11069-1 Piston Ring Pliers, 50-100mm (74152001)
Stahlwille 11069-1 Piston Ring Pliers
$77.00
(Picture)
11069-2 STAHLWILLE 11069-2 Piston Ring Pliers, 80-120mm. (74152002)

$82.00
(Picture)
11063 STAHLWILLE 11063 Valve Stem Seal Pliers. This tool is used for removing the valve stem seals and spring base on VW-Audi engines with overhead camshafts. 250mm length. With bright nickle plated handles and hardened tips. (74290001)
$113.00
$79.99
(Picture)
11063/1 STAHLWILLE 11063/1 Valve Stem Seal Pliers. This tool is used for removing the valve stem seals and spring base on engines with poorly accessible valve stem seals. Around 270mm long.  (74290002) Special Order
$130.00
12600-270 STAHLWILLE 12600-270 Miniature Magnetic Lifter, 270g pickup power, 550mm long, wire shaft. (77260027)
Stahlwille 12600-270 Miniature Wire Shaft
                      Magnetic Lifter

$19.00
(Picture)
12600-500 STAHLWILLE 12600-500 Magnetic Pick-up tool, 500g pickup power, 460mm long, armor shaft. (77260025)
$65.00
(Picture)
12731-20 STAHLWILLE 12731-20 Valve Grinding Tool w/ Suction Cap, 20mm (74050020)
*The type 12731 Discontinued
No Longer Available - 
Stahlwille 12731-20 Valve Grinding Tool with
                      Suction Cap
$11.20

**************
Extension Bars - Quick Search

Quick Seach
1/4" Extension Bar
3/8" Extension Bar
1/2" Extension Bar
Dogleg Extension



Extension Bars -1/4"
1/4 Inch Drive Extension Bars

405/2 STAHLWILLE 405/2 Extension Bar, 1/4" drive,  54mm (2") long. (11010001)

$18.00
405/4 STAHLWILLE 405/4 Extension Bar, 1/4" drive, 100mm (4") long. (11010006)
$18.00
405/6 STAHLWILLE 405/6 Extension Bar, 1/4" drive, 150mm (6") long. (11010002)
$20.00
405/10 STAHLWILLE 405/10 Extension Bar, 1/4" drive, 254mm (10") long
$27.00
405/14 STAHLWILLE 405/14 Extension Bar, 1/4" drive, 356mm (14") long. (11010014)
$32.00
405W/2 STAHLWILLE 405W/2 Extension Bar with 1/4" wobble drive, 54mm (2") long. (11010011)
$21.00
405W/4 STAHLWILLE 405W/4 Extension Bar with 1/4" wobble drive, 100mm (4") long. (11010016)
$24.00
405W/6 STAHLWILLE 405W/6 Extension Bar with 1/4" wobble drive, 150mm (6") long. (11010012)
$25.00
405W/10 STAHLWILLE 405W/10 Extension Bar with 1/4" wobble drive, 254mm (10") long. (11010020)
$32.00
405W/14 STAHLWILLE 405W/14 Extension Bar with 1/4" wobble drive, 356mm (14") long. (11010024)
$36.00
406 STAHLWILLE 406 Extension Bar, flexible, 1/4" drive, 152mm long (6"). (11040000)
$43.00
(Picture)
.
Stahlwille SW427-4 Set
.


Extension Bars - 3/8"

427/1.5 STAHLWILLE 427/1/5 Extension Bar 3/8" drive. 38mm (1.5") long. (12010005)
$29.00
427/3 STAHLWILLE 427/3 Extension Bar 3/8" drive. 76mm (3") long
 $30.00
427/5 STAHLWILLE 427/5 Extension Bar 3/8" drive. 125mm (5") long
 $31.00
427/6 STAHLWILLE 427/6 Extension Bar 3/8" drive. 160mm (6") long
 $33.00
427/10 STAHLWILLE 427/10 Extension Bar 3/8" drive. 240mm (10") long $37.00
427QR/3
STAHLWILLE 427QR/3 Quick Release Extension 3/8" drive. 76mm (3") long. (12011001)

$34.00

Extension Bars - 1/2"

509/2 STAHLWILLE 509/2 Extension Bar, 1/2" drive. 52mm (2") long. (13010001)
$29.00
509/3 STAHLWILLE 509/3 Extension Bar, 1/2" drive. 75mm (3") long. (13010004)
 $31.00
509/5 STAHLWILLE 509/5 Extension Bar, 1/2" drive. 130mm (5") long. (13010002)
 $33.00
509/10 STAHLWILLE 509/10 Extension Bar, 1/2" drive. 255mm (10") long. (13010003)
 $43.00

Extension Bars - Dogleg

1225 STAHLWILLE 1225 Extension Bar, 3/8 dr. Dogleg, 150mm (6") long. (12250001)

$52.00
(Picture)
3505
STAHLWILLE 3505 Dogleg Extension around 120mm (4.5") long overall. With 1/2" drive. Please note: The 3505 dogleg extension has a stud type pin lock. Do NOT use this extension on a regular socket! It will snap in place and you will not be able to remove the socket. It must be used with a perforated socket that will allow access to the release pin. (13210001)
  
$63.00



.
Feeler Gauge
.
11095/13 STAHLWILLE 11095/13 Metric Feeler Gauge, 13 blade, 0.05; 0.10; 0.15; 0.20; 0.25; 0.30; 0.40; 0.50; 0.60; 0.70; 0.80; 0.90; 1.00mm. 100mm long. (74240001)
$17.00
(Picture)
11097/26 STAHLWILLE11097/26 Standard Feeler Gauge 26 Blades .0015-.025". 100mm long. (74240005)
 $33.00
Picture


.
  Files, Hacksaws, Brushes, Scraper
.
12053 STAHLWILLE 12053 Hacksaw, Mini -- pack of replacement blades sold separately. Overall length is 252mm (10").  Blade is 158mm (6"). (72210002)

Stahlwille 12053 Miniature Hacksaw
$35.00
(Picture)
12053R STAHLWILLE 12053R Hacksaw Replacement Blades, Set of 6--see item picture above. (79180002)
$9.00
12481 STAHLWILLE 12481 Scraper, wood handle. (77070000)
$14.50
(Picture)
13115 STAHLWILLE 13115 Brass Wire Brush. (77470001)
$19.00
(Picture)

Malachi
Fuel System
Taylor
11085 STAHLWILLE 11085 Jet Reamer Set. With 16 tapered reamers and holder in a small plastic case. Size 0.33mm - 2.0mm range. We do not have a list of each size. Since these tools are used by hand the results depend on the skill of the user. (74310001). See Kukko Page for similar tool.
(Picture)
12970 STAHLWILLE 12970 Carburetor Base Spanner, 10mm x 12mm. 205mm (7 3/4") long. Good for Toyota; Subaru - all 1800ccm; Nissan--all except Stanza, 280ZX, ZX-T; Mitsubishi; Mazda; Honda Prelude and Civic; Daihatsu . No Longer Available.
$53.38
(Picture)
12975 STAHLWILLE 12975 Fuel Line Clamp. For rubber hose up to 20mm. Not for steel braided hose. (74340001)
Stahlwille 12975 Fuel Line Clamp Stahlwille 12975 Fuel Line Clamp
$20.00
(Picture)
10507N KK-3

STAHLWILLE 10507N KK-3 CO adjustment tool, with 3mm ball end hex tip, for K-Jetronic fuel injection. Ball ended hexagon drivers DRALL for use on hexagon socket head screws, swivel angle up to 25º each side. Chrome Alloy Steel, chrome plated, black tips. With 2 component handle. Overall length 400mm. (73103003) 

Stahlwille 10507N KK-3 CO adjustment tool         

$32.00
(Picture)





Gear Pullers - 2 Arm


STAHLWILLE Standard 2 Arm Gear Puller. The puller has sliding permanent parallel extractor hooks that can be used as internal or external hooks. The puller is zinc plated. It can be used for extracting gearwheels, ball bearings, pulleys and similar parts from shafts and axles.
Stahlwille Standard 2 Arm Gear Puller

11050-1 STAHLWILLE 11050N-1 (71130011) Jaw opening width is 25mm-80mm with a jaw depth of 100mm. Weight 1000g. 

$216.00
11050-2
STAHLWILLE 11050N-2 (71130012) Jaw opening width is 25mm-130mm with a jaw depth of 100mm. Weight 1100g.
Stahlwille 11050-2 Gear Puller

$227.00
11050-3
STAHLWILLE 11050N-3 (71130013) Jaw opening width is 50mm-160mm with a jaw depth of 150mm. Weight 2800g.  $388.00
11050-4
STAHLWILLE 11050N-4 (71130014) Jaw opening width is 60mm-200mm with a jaw depth of 150mm. Weight 3200g.  $434.00
11050-5
STAHLWILLE 11050N-5 (71130015) Jaw opening width is 80mm-250mm with a jaw depth of 200mm. Weight 6700g. Special Order Only!
$719.00
11050-6
STAHLWILLE 11050N-6 (71130016) Jaw opening width is 80mm-350mm with a jaw depth of 200mm. Weight 8000g. Special Order Only! $816.00





Gear Pullers - 3 Arm

Standard 3 Arm Gear Puller. The puller has sliding permanent parallel extractor hooks that can be used as internal or external hooks. The puller is zinc plated. It can be used for extracting gearwheels, ball bearings, pulleys, fan wheels and similar parts from shafts and axles.
Stahlwille 3 Arm Gear Puller

11051-1
STAHLWILLE 11051N-1 (71080011) Jaw opening width is 25mm-80mm with a jaw depth of 100mm. Weight 1280g.  Special Order Only! $298.00
11051-2
STAHLWILLE 11051N-2 (71080012) Jaw opening width is 25mm-120mm with a jaw depth of 100mm. Weight 1600g. Special Order Only! $318.00
11051-3
STAHLWILLE 11051N-3 (71080013) Jaw opening width is 25mm-160mm with a jaw depth of 100mm. Weight 3600g. Special Order Only! $578.00
11051-4
STAHLWILLE 11051N-4 (71080014) Jaw opening width is 25mm-200mm with a jaw depth of 150mm. Weight 3690g. Special Order Only! $628.00



.
Hammers
.
10805 STAHLWILLE 10805 Hammer, Pecking (70130008)
$128.00
10812 STAHLWILLE 10812 Hammer, Planishing (70130013)
$100.00

      Rubber Head    

10940-55 STAHLWILLE 10940-55 Hammer, Rubber Composition Hammers, Head 55mm face (70140001)

$18.00
(Picture)
10940-65
STAHLWILLE 10940-65 Hammer, Rubber Composition Hammers, Head 65mm face (70140002)
$23.00

         Plastic Head       
10955-27 STAHLWILLE 10955-27 Hammer, Plastic Interchangeable, Head 27mm face. Head 90mm (3-1/2"). Length 265mm (10-3/8") ,  (70160027)
Stahlwille 10955-27 Plastic Head Hammer
$27.00
(Picture)
10955R-27
STAHLWILLE 10955R-27 Spare Plastic Head. Price is for 1 head. (79040027)
$4.00
10955-32 STAHLWILLE 10955-32 Hammer, Plastic Interchangeable Head 32mm face. Length 280mm (11") , (70160032)

$36.00
(Picture)

         White Nylon Head        

10956N-27
(70171027)
STAHLWILLE 10956N-27 Nylon Hammer with interchangeable heads of shockproof nylon vestamid and hickory handles. Head 27mm face.

$47.00
(Picture)
10956-35 STAHLWILLE 10956N-35 Hammer, White Nylon Vestamid Interchangeable Head 35mm face (70171035)
$63.00
(Picture)

         Engineer's Hammer    

10961



Price on
Request

       Engineer's Hammer - Ball Pein

10970


10970 1/4
Stahlwille 10970 1/4 Ball Pein Hammer, 1/4 LB (113g), length of head is 67mm, overall length 270mm. 70120001
$45.00
10970 1/2
Stahlwille 10970 1/2 Ball Pein Hammer, 1/2 LB (227g), length of head is 82mm, overall length 290mm. 70120005
$52.00
10970 3/4
Stahlwille 10970 3/4 Ball Pein Hammer, 3/4 LB (340g), length of head is 93mm, overall length 310mm. 70120006
$55.00
10970 1
Stahlwille 10970 1 Ball Pein Hammer, 1 LB (454g), length of head is 99mm, overall length 320mm. 70120002
$58.00
10970 1-1/2
Stahlwille 10970 1-1/2 Ball Pein Hammer, 1-1/2 LB (680g), length of head is 118mm, overall length 350mm. 70120004
$77.00
10970 2 Stahlwille 10970 2 Ball Pein Hammer, 2 LB (907g), length of head is 126mm, overall length 380mm. 70120003
$88.00




IMPACT Tool

560IMP STAHLWILLE type 560IMP Impact Extension 3/4" Drive
Available in 7, 10, 13 inch size.
Stahlwille Impact Tool 3/4" Extension
Price on
Request
4060 STAHLWILLE 4060 Impact Driver. Set with case and bits.
STAHLWILLE IMPACT Driver Set
Price on
Request



.
Internal Bearing Puller
.
11060-0 STAHLWILLE 11060N-0 Internal Bearing Extractor, 5mm-10mm. (71160010)
$128.00
11061-1 STAHLWILLE11061N-1 Counter Stay for use with Internal Extractors. (71170011)
$117.00
11061-2 STAHLWILLE 11061N-2 Counter Stay for use with Internal Extractors. (71170012)
$177.00
11061-3 STAHLWILLE 11061N-3 Counter Stay for use with Internal Extractors. (71170013)
$346.00

.
Machine Shop, Metal Working
.
12250 STAHLWILLE 12250 Hand Pump Oil Can, Metal Container Brass Pump. (77010001)
$65.00
(Picture)
12665/52 STAHLWILLE 12665/52 Metric and Whitworth, Thread Gauge. This gauge will check metric threads from .25 to 6mm. And Whitworth threads from 4 to 62 tpi. With Metric on one side and Whitworth on the other. (77270003)
  Stahlwille 12665/52 Metric and Whitworth
                      Thread Guage     Stahlwille 12665/52 Metric and Whitworth
                      Thread Guage

$23.00
(Picture)

12915-1 STAHLWILLE 12915-1 Tap Holder, Ratcheting, DIN M3-M8, ISO M1-M6. (77390001)
$50.00
(Picture)
12915-2 STAHLWILLE 12915-2 Tap Holder, Ratcheting, DIN M5-M12, ISO M6-M12. (77390002)
$64.00
(Picture)
12753L-260 STAHLWILLE 12753L-260 Tin Snips, Standard Left Hand Cut, 260mm long. (75240001)
$182.00
13110 STAHLWILLE 13110 Steel Rule. Metric and Inch. 300mm long. Division markings on top for 1/16", 1/32", 1/64" and bottom for .05mm, 1mm. (77460001)
( Picture 2 )  ( Picture 3 )  ( Picture 4 )



$14.00
(Picture)





Measuring Tapes

12935/3
Stahlwille 12935/3 Measuring Tape 3 Meter (10 Feet). Metal tape with plastic housing. It has the full 3 meter and 10 foot markings.The tape is about 13mm (1/2") wide. It has a plastic locking button. Very smooth action. It has a little red spring device to absorb the impact from the tape when it winds back into the housing. (77040010)


$46.00
12935/5 Stahlwille 12935/5 Tape Measure 5 Meter length with metric-inch scales. (77040011) $78.00

.
 Nut Drivers
.
Type 10768


10768-3 STAHLWILLE 10768-3 T-Handled Hex Screwdriver 3mm. (43250030)
$15.00
10768-4 STAHLWILLE 10768-4 T-Handled Hex Screwdriver 4mm. (43250040)
$17.00
10768-5 STAHLWILLE 10768-5 T-Handled Hex Screwdriver 5mm. (43250050)
$18.00
10768-6 STAHLWILLE 10768-6 T-Handled Hex Screwdriver 6mm. (43250060)
$20.00
10768-8 STAHLWILLE 10768-8 T-Handled Hex Screwdriver 8mm. (43250080)
$25.00
10768-10 STAHLWILLE 10768-10 T-Handled Hex Screwdriver 10mm. (43250100)
$38.00
Type 10769


10769B-T10 STAHLWILLE 10769B-T10 Tamper Proof T-Handle Torx Drive T10. (43300010)
$17.00
10769B-T15 STAHLWILLE 10769B-T15 Tamper Proof T-Handle Torx Drive T15. (43300015)
$17.00
10769B-T20 STAHLWILLE 10769B-T20 Tamper Proof T-Handle Torx Drive T20. (43300020)
$17.00
10769B-T25 STAHLWILLE 10769B-T25 Tamper Proof T-Handle Torx Drive T25. (43300025)
$18.00
10769B-T27 STAHLWILLE 10769B-T27 Tamper Proof T-Handle Torx Drive T27. (43300027)
$19.00
10769B-T30 STAHLWILLE 10769B-T30 Tamper Proof T-Handle Torx Drive T30. (43300030)
$21.00
10769B-T40 STAHLWILLE 10769B-T40 Tamper Proof T-Handle Torx Drive T40. (43300040)
$28.00
Type 12500N


12500N 4
Stahlwille type 12500N DRALL Nut Spinner. Size 4mm with overall length of 230mm. (43 09 30 04)
$25.00
12500N 4.5
Stahlwille type 12500N DRALL Nut Spinner. Size 4.5mm with overall length of 230mm. (43 09 30 45)
$25.00
12500N 5
Stahlwille type 12500N DRALL Nut Spinner. Size 5mm with overall length of 230mm. (43 09 30 05)
$25.00
12500N 5.5
Stahlwille type 12500N DRALL Nut Spinner. Size 5.5mm with overall length of 230mm. (43 09 30 55)
$25.00
12500N 6
Stahlwille type 12500N DRALL Nut Spinner. Size 6mm with overall length of 240mm. (43 09 30 06)
$25.00
12500N 7
Stahlwille type 12500N DRALL Nut Spinner. Size 7mm with overall length of 240mm. (43 09 30 07)
$27.00
12500N 8
Stahlwille type 12500N DRALL Nut Spinner. Size 8mm with overall length of 240mm. (43 09 30 08)
$29.00
12500N 9 Stahlwille type 12500N DRALL Nut Spinner. Size 9mm with overall length of 240mm. (43 09 30 09)
$31.00
12500N 10
Stahlwille type 12500N DRALL Nut Spinner. Size 10mm with overall length of 240mm. (43 09 30 10)
NSN number 5120-12-121-1041
$33.00
12500N 11
Stahlwille type 12500N DRALL Nut Spinner. Size 11mm with overall length of 250mm. (43 09 30 11)
$42.00
12500N 12
Stahlwille type 12500N DRALL Nut Spinner. Size 12mm with overall length of 250mm. (43 09 30 12)
$43.00
12500N 13
Stahlwille type 12500N DRALL Nut Spinner. Size 13mm with overall length of 250mm. (43 09 30 13)
$45.00
Type
12506



12506-2k-6
STAHLWILLE 12506-2k-6 Flexible Nut driver, 6mm, 290mm (11-1/2") long. (43103206)
$42.00
(Picture)

12506-2k-7 STAHLWILLE 12506-2k-7 Flexible Nut driver, 7mm, 290mm (11-1/2") long. (43103207)
$42.00
(Picture)
12506-2k-8 STAHLWILLE 12506-2k-8 Flexible Nut driver, 8mm, 290mm (11-1/2") long. (43103208)
$42.00
(Picture)


.
Oil Service
.
3045
STAHLWILLE 3045 Socket, Spin off oil filter, 14 points 74mm across. With 22mm outside drive. For Mann and Knecht filters. Also Mercedes-Benz Engines: M102, M103, M104, M110, M111, M119, and M120 series C,E since 6/95. Good for the new ML class, and Sprinter 5 cylinder diesel. Also good for BMW, VW, Audi, and Porsche. Similar to the Mercedes-Benz factory tool 103 589 02 09 00. Please inspect your engine and measure before ordering.  (74370001)




 
$41.00
(Picture)
1044 STAHLWILLE 1044 Wrench, Oil Service, 17mm hex key, 21mm box end, old VW. This tool is no longer listed in the Catalog. NO Longer Available. $53.15
(Picture)
3677 STAHLWILLE 3677 Oil Service Wrench for Mercedes,  14mm hex - 17mm box. NO Longer Available. $59.45
(Picture)


Oil Bottle

12251
STAHLWILLE 12251 Oil squeeze bottle. This is an 8oz (250ml) plastic bottle with a brass pick-up tube and top. The tip has a twist fitting you can turn to open and close. A nice feature that will prevent spills! About 7.5" tall. Made in Czech Republic by PRESSOL.  (77110002) To be Discontinued.
PRESSOL Germany
Stahlwille 12251 Oil
                  Bottle
$31.99
(Picture)




.
Pliers
.

Stahlwille Slip-Joint Waterpump Pliers.
More Info
65156125
Stahlwille 6515 Slip-joint MINI-waterpump pliers. 125mm in length, max jaw opening of 25mm. Box joint, 4 adjustment positions, anti-pinch protection.
$50.00
65516175
Stahlwille 6551 Slip-joint Waterpump Pliers. 177mm in length, max jaw opening of 24mm. Box joint, 6 adjustment positions, anti-pinch protection.
$45.00
65516240
Stahlwille 6551 Slip-joint Waterpump Pliers. 240mm in length, max jaw opening of 34mm. Box joint, 7 adjustment positions, anti-pinch protection.
$49.00
(Picture)
65516300
Stahlwille 6551 Slip-joint Waterpump Pliers. 302mm in length, max jaw opening of 45mm. Box joint, 7 adjustment positions, anti-pinch protection.
$75.00



10625 STAHLWILLE 10625 Ear Clamp Pincers. These pincers are for the placement of the 1 and 2-ear clamps on the shaft sleeves on the radiator and fuel lines. These are applicable on Audi, BMW, Ford, GM, Honda, Mazda, Mercedes-Benz, VW, Opel and Nissan. These pincers are made of quality steel with a black paint finish. 225mm in length and weight of 340g. (76540002) **Estimated delivery 4-6 weeks!!
$73.00
(Picture)

10625/2 STAHLWILLE 10625/2 Hose Clip Pliers. These pliers are for closing hose clips without ears correctly. They are for the shaft sleeves on VW, Mercedes-Benz, Audi and Toyota. They are made of quality nickel-plated steel and the jaws are a gunmetal finish. 200mm in length and weight of 173g. (76540003) Note: See Esgen 12944-1 Click here.
$119.00
66026180
STAHLWILLE 66026180 Pliers, Heavy Duty Side Cutters $66.00
(Picture)
65296200 STAHLWILLE 65296200 Pliers, Snipe Nose Pliers with Cutter
$59.00
(Picture)
65016180 STAHLWILLE 65016180 Pliers, Combination Pliers $52.00
(Picture)
65632175 STAHLWILLE 65632175 Pliers, Universal Self Grip Pliers (175mm)  $53.00
(Picture)
65632250 STAHLWILLE 65632250 Pliers, Universal Self Grip Pliers (250mm) 
Stahlwille 65632250 Universal Self Grip
                      Pliers
$60.00
(Picture)
66346220 STAHLWILLE 66346220 Pliers, European Terminal Crimping Pliers, DIN46228, 10" $154.00
(Picture)
66601280 STAHLWILLE 66601280 Cutting Pliers, gun metal finish, polished. 224mm long. 
$55.00

22222222222
Inside Snap Ring Pliers- Straight Tips

65436000
STAHLWILLE J 0 Circlip Pliers. 140mm  for circlip sizes 8-13mm
Price on Request
65436001
STAHLWILLE J 1 Circlip Pliers. 140mm for circlip sizes 12-25mm
Price on Request
65436002
STAHLWILLE J 2 Circlip Pliers. 180mm for circlip sizes 19-60mm Price on Request
65436003
STAHLWILLE J 3 Circlip Pliers. 225mm for circlip sizes 40-100mm Price on Request
65436004
STAHLWILLE J 4 Circlip Pliers. 320mm for circlip sizes 85-140mm Price on Request


Inside Snap Ring Pliers - Bent Tips 90 Degree
65446001
STAHLWILLE J 01 Circlip Pliers. 130mm for circlip sizes 8-13mm Price on Request
65446011
STAHLWILLE J 11 Circlip Pliers. 130mm for circlip sizes 12-25mm Price on Request
65446021
STAHLWILLE J 21 Circlip Pliers. 170mm for circlip sizes 19-60mm Price on Request
65446031
STAHLWILLE J 31 Circlip Pliers. 215mm for circlip sizes 40-100mm Price on Request
65446041
STAHLWILLE J 41 Circlip Pliers. 300mm for circlip sizes 85-140 Price on Request

                        
Outside Snap Ring Pliers - Straight Tips

65456000
STAHLWILLE A 0 Circlip Pliers. 140mm long 0.9mm tips, for outside circlip sizes 3-10mm, straight tips. Price on Request
65456001
STAHLWILLE A 1 Circlip Pliers. 140mm long 1.3mm tips, for outside circlip sizes 10-25mm, straight tips. Price on Request
65456002
New Number
65456102
STAHLWILLE A 2 Circlip Pliers. 180mm long 1.8mm tips, for outside circlip sizes 19-60mm, straight tips.
Price on Request
65456003
STAHLWILLE A 3 Circlip Pliers. 210mm long 2.3mm tips, for outside circlip sizes 40-100mm, straight tips. Price on Request
65456004
STAHLWILLE A 4 Circlip Pliers. 315mm long 3.2mm tips,  for outside circlip sizes 85-140mm, straight tips.
Price on Request


Outside Snap Ring Pliers - Bent Tips 90 Degree

65466001
STAHLWILLE A 01 Circlip Pliers. 125mm long, 1.3mm tips, for circlip sizes 3-10mm.
65466011
STAHLWILLE A 11 Circlip Pliers. 125mm long, 1.3mm tips, for outside circlip sizes 10-25mm, Bent Tips 90 Degree.

Stahlwille A 11 Circlip Pliers
$47.00
(Picture)

65466021
STAHLWILLE A 21 Circlip Pliers. 170mm long, 1.8mm tips, for circlip sizes 19-60mm. Price on Request
65466031
STAHLWILLE A 31 Circlip Pliers. 200mm long, 2.3mm tips, for circlip sizes 40-100mm. Price on Request
65466041
STAHLWILLE A 41 Circlip Pliers. 290mm long, 3.2mm tips, for circlip sizes 85-140mm. Price on Request
65476170
STAHLWILLE Special Circlip Pliers, 170mm long, for slotted circlips.
Price on Request

.
Promotional Items
.
. . .

.
Punch, Chisels
.
108/6D STAHLWILLE 108/6D Parallel Pin Punch Set. Metric sizes 150mm long. Set of 6 punches with size 2.5, 3, 4, 5, 6, 8mm. This set comes in a plastic stand. (96700701)
$93.00
(Picture)

108/6T STAHLWILLE 108/6Pc Parallel Pin Punch Set. Metric sizes 150mm long. Set of 6 punches with size 2.5, 3, 4, 5, 6, 8mm. This set comes in a textile bag. (96700702)
$115.00
(Picture)
108/150x8
STAHLWILLE 108/150x8 Parallel Pin Punch, Metric. 150mm long. Punch is 8mm. (70070006)
$17.00
108/175x3
STAHLWILLE 108/175x3 Parallel Pin Punch, Metric. 175mm long. Punch is 3mm. (70070009)
$17.00
108/175x4 STAHLWILLE 108/175x4 Parallel Pin Punch, Metric. 175mm long. Punch is 4mm. Good for Mercedes brake pin. (70070010)
Stahlwille
                    108/175x4 Parallel Pin Punch

$17.00

.

Ratchets and Drive Tools
.
25-12x13
STAHLWILLE 25-12x13 Ratchet Ring Spanner. 170mm long. 12mm thick. (41131213) Made in the USA for Stahlwille.

  
$59.00
240 STAHLWILLE 240 Open-end ratchet wrench. By using this wrench, inch or metric nuts can be loosened or tightened! Specially suited for union nuts. Made of tempered steel. Available in sizes 8mm (5/16) thru 19mm (3/4"). 
Stahlwille 240 Open-end Ratchet Wrench

Stahlwille 240 Open-End Ratchet Wrench      

Price on Request
240-13 STAHLWILLE 240-13 Open-end ratchet wrench. 13mm- 1/2". (41101313)
$93.00
(Picture)
Ratchets 1/4" Drive

12503 STAHLWILLE 12503 Stubby magnetic 1/4" bit holder.
(18110016)
$38.00
(Picture)
12504-2K STAHLWILLE 12504-2K Drive Handle, Flexible shaft 1/4" hex bit holder.  Length (9" inches) 230mm. (18103016)
STAHLWILLE Flexible Bit Holder
$47.00
(Picture)
400 DRALL STAHLWILLE 400 DRALL (11050011)  Drive Handle, 1/4 drive,  with 1/4" fitting on top. 150mm long.
$28.00
(Picture)
401
STAHLWILLE 401-2K Drive Handle, 1/4" drive, Flexible Shaft, 240mm long. Maximum Torque 5Nm. Right hand rotation only (11053002). Two-component Green/Black handle.




$50.00
415 STAHLWILLE 415-2K (11111010) Ratchet, Reversible, 1/4 drive. 22 Teeth, 2-component handle.
$124.00
(Picture)

415QRL N Stahlwille 415QRL N (11111040) QuickRelease Ratchet. A fine tooth ratchet with 80 teeth, 1/4" drive and QuickRelease safety lock. 153mm in length. $179.00
415QRN
STAHLWILLE 415QR N (11111020) Quick Release 1/4" Drive Ratchet. Fine tooth with 80 teeth and quick release safety lock, and a two-component handle, for use in confined spaces. 117mm in length. 70g. DIN 3122/ISO 3315.

Stahlwille 415QR N Quick Release Ratchet
$143.00
415SGB  N STAHLWILLE 748SGBS Ratchet, Bit Holding for 1/4" Bits. (11132020) $167.00
415SG-QR STAHLWILLE 415SG-QR (11111030) QuickRelease Ratchet. Classic teardrop. A reversible fine tooth ratchet with 80 teeth, 1/4" drive and a QuickRelease safety lock. Steel handle. 117mm in length. 90g. DIN 3122/ISO 3315.
$149.00
415SGH N Stahlwille 415SGH N (11110010) Hi-Lok Ratchet. Fine tooth ratchet with 80 teeth, 1/4" drive, 117mm in length. Takes hexagon keys.
$184.00
416QR STAHLWILLE 416QR (11261010) Flexible Joint Reversible Ratchet. 1/4" drive with 60 teeth. Lockable in following positions: straight30° up,   60° up30°  down. To unlock depress button in handle. Handle may be raised or lowered by approximately 90°.
$216.00
(Picture)

Ratchets 3/8" Drive

432 STAHLWILLE 432 (12030003) Adapter, 3/8-1/2 drive
$24.00
422-2K STAHLWILLE 422-2K Ratchet, Fine Tooth, Reversible, 60 teeth, 6 degree, 3/8" drive, 194mm long. Head width 32mm, head thickness 24mm. With a 2 component handle. (12231011)

$114.00
435SG-QR N STAHLWILLE 435SG-QR N (12111030) Fine Tooth Ratchet, Quick Release, 80 teeth, reversible, 3/8" drive, 193mm in length. Steel handle, quick release.

$168.00
$119.99
435QR N STAHLWILLE 435QR N  Ratchet, QuickRelease, 3/8" drive. 30 Teeth. 2-component handle. Length 193mm (7-1/2") inch.  Order Code: (12111020)

( PIC 2 ) ( PIC 3 ) ( PIC 4 ) ( PIC 5 )
$140.57
$124.99
(Picture)
435QR N STAHLWILLE 435QR N (12111020) Fine tooth Ratchet with 80 teeth, QuickRelease, 3/8" drive, 193mm in length. $160.00
425 STAHLWILLE 425 (12070000) Sliding T-Handle, 3/8" drive
$36.00
(Picture)
452

STAHLWILLE 452 (12260001) Ratchet, 3/8" drive, locking flex head. Locks in straight position, 30 degree up, 60 degree up, 30 degree down.  Push button release. Fine tooth. Around 300mm (12"inches) long.  No Longer Available.
$153.44
(Picture)
452QR STAHLWILLE 452QR (12261010) Quick Release Ratchet, 3/8" drive, locking flex head. Locks in straight position, 30 dgreee up, 60 degree up, 30 degree down.  Push button release. Fine tooth with 80 teeth. Around 300mm (12"inches) long. New Version of 452.

$241.00
Ratchets 1/2" Drive

502-1/2 STAHLWILLE 502-1/2 1/2" Square Drive. Order Code: 59010011
$21.00
512QRN STAHLWILLE 512QR N80 Ratchet, QuickRelease, 80 teeth,  6 degree engagement,  1/2" drive, 265.5mm long, 2 component handle. (13111120)
Stahlwille 512QRN Quick Release Ratchet
$179.00
(Picture)

512SG-QR N STAHLWILLE 512SG-QRN (13111030) Fine Tooth Ratchet with 80 teeth, Classic Teardrop, 1/2" drive
$190.00

.
Screwdrivers
.
4008-1
STAHLWILLE 4008-1 Long Ratcheting Bit Holder for 1/4" hex bits. Easy change of direction Non-slip 2-component  handle for optimum force transmission. It contains a storage compartment for 6 bits in the handle. NOTE: Bits not included. Length 250mm. (18120001)
$57.00
4008-2 Stahwille 4008-2 Short Ratcheting Bit Holder for 1/4" hex bits. Easy change of direction Non-slip 2-component handle for optimum force transmission.  Length 95mm. (18120002)
$47.00


4691 STAHLWILLE 4691 DRALL Screwdriver Set, 7 piece. (96469115) (Picture 2)
Contents: Type 4620 (flat blade) Size 1 (0.6x3.5x75mm) 
                 Type 4620 (flat blade) Size 2 (0.8x4.0x100mm) 
                 Type 4620 (flat blade) Size 3 (1.0x5.5x125mm)
                 Type 4620 (flat blade) Size 4 (1.2x6.5x150mm) 
                 Type 4628 (flat blade) Size 1 (0.4x2.5x60mm) 
                 Type 4630 (phillips) Size PH1 
                 Type 4630 (phillips) Size PH2
Stahlwille 4691 DRALL Screwdriver Set

$116.00
(Picture)




4692
STAHLWILLE 4692 Screwdriver Set, 8 piece. (96469215)
Content: 4620: Size 1 (0.6 x 3.5 x 75 mm)
                Size 2 (0.8 x 4.0 x 100 mm)
                Size 3 (1.0 x 5.5 x 125 mm)
                Size 4 (1.2 x 6.5 x 150 mm)
                Size 5 (1.6 x 8.0 x 175 mm)
                4630: Size 1; Size 2; Size 3
Stahlwille 4962 Screwdriver Set

$167.00
$139.00
(Picture)
4693 Stahlwille 4693/9 DRALL+ Screwdriver Set, 9 piece. (96469315). Contents include the following:
  • 4622 Flat/Slotted
    • Size 1 - 1.0 x 5.5 x 100mm
    • Size 2 - 1.2 x 6.5 x 125mm
    • Size 3 - 1.2 x 8.0 x 150mm
    • Size 4 - 1.6 x 10.0 x 175mm
  • 4628 Flat/Slotted - Size 1 - 0.4 x 2.5 x 60mm
  • 4632 Phillips - Size PH1 and PH2
  • 4724 Flat/Slotted - Size 2 - 1.0 x 5.5 x 25mm
  • 4734 Phillips - Size PH2
$221.00

(Pic 2)

(Pic 3)

4756-T15
STAHLWILLE 4756-T15 TORX Screwdriver with hollow point, security tip. Chrome alloy steel with black tip. Tip size 3.3mm. All black handle is to be discontinued. Limited quantity left. On SALE!!!
Stahlwille 4756-T15 Torx Screwdriver

$19.26
SALE
$16.99

Stahlwille 4656 Torx Screwdriver


4656-T25
STAHLWILLE 4656-T25 (46563025) TORX Screwdriver with hollow point, security tip. With 2 component handle green/black. Chrome alloy steel with black tip. Tip size 4.4mm Old tool #4756-T25
$27.00

4656-T30
STAHLWILLE 4656-T30 (46563030) TORX Screwdriver with hollow point, security tip. With 2 component handle green/black.Chrome alloy steel with black tip. Tip size 5.5mm Old tool #4756-T30
$30.00
4791 STAHLWILLE 4791 DRALL Screwdriver Set, 7 piece.  No Longer Avaliable See 4691
Contents: Type 4720 (flat blade) Size 1 (0.6x3.5x75mm) 
                 Type 4720 (flat blade) Size 2 (0.8x4.0x100mm) 
                 Type 4720 (flat blade) Size 4 (1.0x5.5x125mm)
                 Type 4720 (flat blade) Size 5 (1.2x6.5x150mm) 
                 Type 4728 (flat blade) Size 1 (0.4x2.5x50mm) 
                 Type 4730 (phillips) Size PH1 
                 Type 4730 (phillips) Size PH2
$83.93
(Picture)
4792 STAHLWILLE 4792 DRALL Screwdriver Set, Bolstered, 9 Pieces. No Longer Avaliable. See 4692
Contents: Type 4722 (flat blade) Size 1 (1x5.5x100mm) 
                 Type 4722 (flat blade) Size 2 (1.2x6.5x125mm) 
                 Type 4722 (flat blade) Size 3 (1.2x8x150mm) 
                 Type 4722 (flat blade) Size 4 (1.6x10x175mm) 
                 Type 4724 (flat blade) Size 2 (1x5.5x25mm) 
                 Type 4728 (flat blade) Size 1 (0.4x2.5x50mm) 
                 Type 4730 (phillips) Size PH1 
                 Type 4732 (phillips) Size PH2 
                 Type 4734 (phillips) Size PH2
$139.99
(Picture)


4797 STAHLWILLE 4797 Screwdriver Set, Electronic Mini Precision Screwdriver Set, 7 items.  (96479715)
Only one set available at sale price.
Includes these tools:
               No.
4751 Flat Blade Screwdrivers
               Size 4 (0.3x1.5x40mm)
               Size 6 (0.4x2x60mm)
               Size 7 (0.4x2.5x75mm)
               Size 8(0.5x3x75mm)
               No. 4752 Phillips Blade Screwdrivers.
               Size 00
               Size 0
               Size 1          
SALE
$75.00

$114.00

(Picture)
4734-2 STAHLWILLE 4734-2 Screwdriver, Stubby Phillips Size 2. (47341002)
$17.00
4892 STAHLWILLE 4892 Screwdriver Set, 8 Pieces, 3K Grip. (96489210). Only one set available at the sale price.

SALE
$119.00

$192.00

(Picture)


Sockets 1/4" Inch Drive - Quick Search
Quick
Search
Chrome - Metric - Socket Set Hex Bit - Metric - Stubby Slotted Screwdriver - Short
Chrome - Metric - 6 Point Phillips Screwdriver - Stubby Torx - Female
Chrome - Metric - 6 Point Deep Sets 1/4" Drive Torx - Male - SALE!
Hex Bit - Metric
Torx - Male - Tamper


Back to Top

1/4"


.
Socket Set  1/4" Drive Chrome
.
40/23/6 KN Socket Set 40/23/6 KN. 29 Pieces in stackable plastic case. Ratchet, sockets, extension, swivel, etc.. (96011136) Special Order. Call for your price!
Stahlwille 40/23/6 KN 1/4 Inch Drive Socket
                      Set
$650.00

Price on
Request.
(Picture)
40/24/6QR KN STAHLWILLE 40/24/6QR KN Socket Set 30 pieces, 4;5;5.5;6;7;8;9;10;11;12;13;14mm and more... (96011182)
 $694.00


Sockets 1/4" Drive - Metric - 6 Point Deep

40L-5 STAHLWILLE 40L-5 Socket, Deep 6 Point, 1/4 drive, 5mm. (1020005)
$37.00
40L-6 STAHLWILLE 40L-6 Socket, Deep 6 Point, 1/4 drive, 6mm. (1020006)
$37.00
40L-7 STAHLWILLE 40L-7 Socket, Deep 6 Point, 1/4 drive, 7mm. (1020007)
$37.00
40L-8 STAHLWILLE 40L-8 Socket, Deep 6 Point, 1/4 drive, 8mm. (1020008)
$36.00
40L-9 STAHLWILLE 40L-9 Socket, Deep 6 Point, 1/4 drive, 9mm. (1020009)
$39.00
40L-10 STAHLWILLE 40L-10 Socket, Deep 6 Point, 1/4 drive, 10mm. (1020010)
$38.00
40L-11 STAHLWILLE 40L-11 Socket, Deep 6 Point, 1/4 drive, 11mm. (1020011)
$39.00
40L-12 STAHLWILLE 40L-12 Socket, Deep 6 Point, 1/4 drive, 12mm. (1020012)
$37.00
40L-13 STAHLWILLE40L-13 Socket, Deep 6 Point, 1/4 drive, 13mm. (1020013)
$36.00


*********
Socket 1/4" drive - Chrome - Metric 6 Point

40/9  STAHLWILLE 40/9 Socket Set, Metric, 1/4" drive, 5-13mm. Note: No longer available on a rail, see indivdual sizes below.

Stahlwille 40/9 Socket Set

(Picture)
40-13 STAHLWILLE 40-13 Socket, Metric, 1/4" drive, 13mm. (1010013)
$12.00
40-12 STAHLWILLE 40-12 Socket, Metric, 1/4" drive, 12mm. (1010012)
$13.00
40-11 STAHLWILLE 40-11 Socket, Metric, 1/4" drive, 11mm. (1010011)
$13.00
40-10 STAHLWILLE 40-10 Socket, Metric, 1/4" drive, 10mm. (1010010)
$12.00
40-9 STAHLWILLE 40-9 Socket, Metric, 1/4" drive,   9mm. (1010009)
$12.00
40-8 STAHLWILLE 40-8 Socket, Metric, 1/4" drive,   8mm. (1010008)
$12.00
40-7 STAHLWILLE 40-7 Socket, Metric, 1/4" drive,   7mm. (1010007)
$12.00
40-6 STAHLWILLE 40-6 Socket, Metric, 1/4" drive,   6mm. (1010006)
$12.00
40-5 STAHLWILLE 40-5 Socket, Metric, 1/4" drive,   5mm. (1010005)
$12.00


Socket 1/4" Drive Slotted Screwdriver

41K
Stahlwille 41K Short Slotted Screwdriver
                      Sockets

.
41K-0.6 x 3.5 STAHLWILLE 41K-0.6 x 3.5 Socket, Short Slotted Screwdriver, 1/4" drive, 0.6 x 3.5mm. (1280006)
$17.00
41K-0.8 x 4 STAHLWILLE 41K-0.8 x 4 Socket, Short Slotted Screwdriver, 1/4" drive, 0.8 x 4. (1280008)
$17.00
41K-1 x 5.5 STAHLWILLE 41K-1 x 5.5 Socket, Short Slotted Screwdriver, 1/4" drive, 1 x 5.5. (1280010)
$17.00
41K-1.2 x 8 STAHLWILLE 41K-1.2 x 8 Socket, Short Slotted Screwdriver, 1/4" drive, 1.2 x 8. (1280012)
$17.00
41K-1.6 x 10 STAHLWILLE 41K-1.6 x 10 Socket, Short Slotted Screwdriver, 1/4" drive, 1.6 x 10 No Longer Available.
$14.10


Socket 1/4" Drive Hex Bit - Metric - Stubby

SF44K/5 STAHLWILLE 44K/5 Socket Set, Set of 5 Stubby Metric Hex Bits , 1/4" drive 3, 4, 5, 6, 8mm.   The Stahlwille 40 CL-1 (80400001) storage rail is included. It is 200mm (8" inches) long. The rail will hold 9 tools, so you will have room to expand the set. Each bit is 28mm long overall, with a 16mm long tip.
Picture 2 )    ( Picture 3


Stahlwille
                          44K/5 Hex Bit Socket Set


$89.99
(Picture)
44K-8 STAHLWILLE 44K-8 Socket, Stubby Metric Hex, 1/4" drive, 8mm. (1120008)
$18.00
44K-6 STAHLWILLE 44K-6 Socket, Stubby Metric Hex, 1/4" drive, 6mm. (1120006)
$18.00
44K-5 STAHLWILLE 44K-5 Socket, Stubby Metric Hex, 1/4" drive, 5mm. (1120005)
$18.00
44K-4 STAHLWILLE 44K-4 Socket, Stubby Metric Hex, 1/4" drive, 4mm. (1120004)
$18.00
44K-3 STAHLWILLE 44K-3 Socket, Stubby Metric Hex, 1/4" drive, 3mm. (1120003)
$18.00

Socket 1/4" Hex Bit - Metric


Stahlwille 44 Long Hex Bit Socket

44-6 STAHLWILLE 44-6 Socket, Long,  Hex, 6mm, 55mm long. (1050006)
$23.00
44-5 STAHLWILLE 44-5 Socket, Long,  Hex, 5mm, 55mm long. (1050005)
$23.00
44-4 STAHLWILLE 44-4 Socket, Long, Hex, 4mm, 55mm long. (1050004)
$23.00
44-3 STAHLWILLE 44-3 Socket,Long,  Hex, 3mm, 55mm long. (1050003)
$23.00


Socket 1/4" Drive Phillips - Stubby

44P/4 STAHLWILLE 44P/4 Socket Set, Stubby Phillips Set, 1/4" drive, PH1, 2, 3, 4. Note: no longer available on a rail, see individual sizes below.
Stahlwille 44P/4 Stubby Phillips Head Socket
                      Set
(Picture)
44P-4 STAHLWILLE 44P-4 Socket, Stubby Phillips, 1/4" drive, PH4. (1290004)
$18.00
44P-3 STAHLWILLE 44P-3 Socket, Stubby Phillips, 1/4" drive,  PH3. (1290003)
$18.00
44P-2 STAHLWILLE 44P-2 Socket, Stubby Phillips, 1/4" drive,  PH2. (1290002)
$18.00
44P-1 STAHLWILLE 44P-1 Socket, Stubby Phillips, 1/4" drive,  PH1. (1290001)
$18.00


Socket 1/4" Drive Torx - Female

40TX/6 STAHLWILLE 40TX/6 Socket Set, 1/4"drive, Female Torx, Set  E4-E10 Note: no longer available on a rail, see individual sizes below.

Stahlwille 40TX/6 Female Torx Socket Set
(Picture)
40TX-E10 STAHLWILLE 40TX-E10 Socket, 1/4"drive, Female Torx,  E10. (1270010)
$19.00
40TX-E8 STAHLWILLE 40TX-E8 Socket, 1/4"drive, Female Torx, E8. (1270008)
$17.00
40TX-E7 STAHLWILLE 40TX-E7 Socket, 1/4"drive, Female Torx,  E7. (1270007)
$17.00
40TX-E6 STAHLWILLE 40TX-E6 Socket, 1/4"drive, Female Torx,  E6. (1270006)
$17.00
40TX-E5 STAHLWILLE 40TX-E5 Socket, 1/4"drive, Female Torx,  E5. (1270005)
$17.00
40TX-E4 STAHLWILLE 40TX-E4 Socket, 1/4"drive, Female Torx,  E4. (1270004)
$17.00


Socket 1/4" Drive Torx - Male

44KTX/9 STAHLWILLE 44KTX/9 Screwdriver Socket Set, 1/4" drive Torx Set. Sizes: T8, T9, T10, T15, T20, T25, T27, T30, and T40. Chrome Alloy Steel and chrome plated. Note: no longer available on a rail, see individual sizes below.
Stahlwille 44KTX/9 Screwdriverr Socket
                          Set

     (Picture)
44KTX-T40 STAHLWILLE 44KTX-T40 Socket, 1/4" drive, Torx, T40. (1350040)
$22.00
44KTX-T30 STAHLWILLE 44KTX-T30 Socket, 1/4" drive, Torx, T30. (1350030)
$20.00
44KTX-T27 STAHLWILLE 44KTX-T27 Socket, 1/4" drive, Torx, T27. (1350027)
$20.00
44KTX-T25 STAHLWILLE 44KTX-T25 Socket, 1/4" drive, Torx, T25. (1350025)
$20.00
44KTX-T20 STAHLWILLE 44KTX-T20 Socket, 1/4" drive, Torx, T20. (1350020)
$20.00
44KTX-T15 STAHLWILLE 44KTX-T15 Socket, 1/4" drive, Torx, T15. (1350015)
$20.00
44KTX-T10 STAHLWILLE 44KTX-T10 Socket, 1/4" drive, Torx, T10. (1350010)
$20.00
44KTX-T9 STAHLWILLE 44KTX-T9 Socket, 1/4" drive, Torx, T9. (1350009)
$20.00
44KTX-T8 STAHLWILLE 44KTX-T8 Socket, 1/4" drive, Torx, T8. (1350008)
$20.00

Sockets 1/4" Drive Torx-Male - Tamper Proof


44KTXB-T40 STAHLWILLE 44KTXB-T40 Socket, 1/4" drive, Tamper-proof Torx, T40. (1351040) $21.00
44KTXB-T30
STAHLWILLE 44KTXB-T30 Socket, 1/4" drive, Tamper-proof Torx, T30. (1351030) $20.00
44KTXB-T27 STAHLWILLE 44KTXB-T27 Socket, 1/4" drive, Tamper-proof Torx, T27. (1351027) $21.00
44KTXB-T25 STAHLWILLE 44KTXB-T25 Socket, 1/4" drive, Tamper-proof Torx, T25. (1351025) $20.00
44KTXB-T20 STAHLWILLE 44KTXB-T20 Socket, 1/4" drive, Tamper-proof Torx, T20. (1351020) $20.00
44KTXB-T15 STAHLWILLE 44KTXB-T15 Socket, 1/4" drive, Tamper-proof Torx, T15. (1351015) $20.00
44KTXB-T10 STAHLWILLE 44KTXB-T10 Socket, 1/4" drive, Tamper-proof Torx, T10. (1351010) $20.00
44KTXB-T9 STAHLWILLE 44KTXB-T9 Socket, 1/4" drive, Tamper-proof Torx, T9. (1351009) $20.00
44KTXB-T8 STAHLWILLE 44KTXB-T8 Socket, 1/4" drive, Tamper-proof Torx, T8. (1351008) $20.00


Sockets 3/8" Inch Drive - Quick Search
Quick
Search
Chrome - Metric 6 Point Hex Bit - Metric -Short Torx Bit-Male
Chrome - Metric 12 Point Hex Bit - SAE -Short Triple Square
Chrome - Metric 12 Point - Long Sets - 3/8 inch Drive XZN
Hex Bit - Metric - Long Torx Bit - Female


.3/8"

Sets -- 3/8" Drive

456/11/4 KN
STAHLWILLE 456/11/4 KN 3/8" drive Socket Set. 15 piece socket set in a case. 1780g Code #96022133
Set includes:
  • 11 Sockets with hexagon No 456 in sizes 8; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19mm
  • 1 Ratchet No 435
  • 2 Extensions No 427/3 (76mm); No 427/10 (240)mm
  • 1 Universal Joint No 428

$516.00

.
Sockets 3/8" Chrome  Metric 12 Point
.
45-7 STAHLWILLE 45-7 Socket, 12 Point, 3/8" drive, 7mm. (2010007)
$18.00
45-8 STAHLWILLE 45-8 Socket, 12 Point, 3/8" drive, 8mm. (2010008)
$18.00
45-9 STAHLWILLE 45-9 Socket, 12 Point, 3/8" drive, 9mm. (2010009)
$18.00
45-10 STAHLWILLE 45-10 Socket, 12 Point, 3/8" drive, 10mm. (2010010)
$17.00
45-11 STAHLWILLE 45-11 Socket, 12 Point, 3/8" drive, 11mm. (2010011)
$18.00
45-12 STAHLWILLE 45-12 Socket, 12 Point, 3/8" drive, 12mm. (2010012)
$18.00
45-13 STAHLWILLE 45-13 Socket, 12 Point, 3/8" drive, 13mm. (2010013)
$17.00
45-14 STAHLWILLE 45-14 Socket, 12 Point, 3/8" drive, 14mm. (2010014)
$18.00
45-15 STAHLWILLE 45-15 Socket, 12 Point, 3/8" drive, 15mm. (2010015)
$18.00
45-16 STAHLWILLE 45-16 Socket, 12 Point, 3/8" drive, 16mm. (2010016)
$18.00
45-17 STAHLWILLE 45-17 Socket, 12 Point, 3/8" drive, 17mm. (2010017)
$18.00
45-18 STAHLWILLE 45-18 Socket, 12 Point, 3/8" drive, 18mm. (2010018)
$18.00
45-19 STAHLWILLE 45-19 Socket, 12 Point, 3/8" drive, 19mm. (2010019)
$18.00
45-20 STAHLWILLE 45-20 Socket, 12 Point, 3/8" drive, 20mm. (2010020)
$23.00
45-21 STAHLWILLE 45-21 Socket, 12 Point, 3/8" drive, 21mm. (2010021)
$22.00
45-22 STAHLWILLE 45-22 Socket, 12 Point, 3/8" drive, 22mm. (2010022)
$21.00


Sockets 3/8" Chrome - Metric 12 Point - Long


Stahlwille 3/8 Inch Sockets

46-8 STAHLWILLE   8mm Chrome Metric Socket, 3/8" drive, 12 point, Long. Code 02020008 $37.00
46-10
STAHLWILLE 10mm Chrome Metric Socket, 3/8" drive, 12 point, Long. Code 02020010 $36.00
46-11
STAHLWILLE 11mm Chrome Metric Socket, 3/8" drive, 12 point, Long. Code 02020011 $41.00
46-12
STAHLWILLE 12mm Chrome Metric Socket, 3/8" drive, 12 point, Long. Code 02020012 $38.00
46-13
STAHLWILLE 13mm Chrome Metric Socket, 3/8" drive, 12 point, Long. Code 02020013 $36.00
46-14
STAHLWILLE 14mm Chrome Metric Socket, 3/8" drive, 12 point, Long. Code 02020014 $43.00
46-15
STAHLWILLE 15mm Chrome Metric Socket, 3/8" drive, 12 point, Long. Code 02020015 $42.00
46-16
STAHLWILLE 16mm Chrome Metric Socket, 3/8" drive, 12 point, Long. Code 02020016 $43.00
46-17
STAHLWILLE 17mm Chrome Metric Socket, 3/8" drive, 12 point, Long. Code 02020017 $47.00
46-18
STAHLWILLE 18mm Chrome Metric Socket, 3/8" drive, 12 point, Long. Code 02020018 $49.00
46-19 STAHLWILLE 19mm Chrome Metric Socket, 3/8" drive, 12 point, Long. Code 02020019 $47.00
46-21
STAHLWILLE 21mm Chrome Metric Socket, 3/8" drive, 12 point, Long. Code 02020021 $53.00
46-22 STAHLWILLE 22mm Chrome Metric Socket, 3/8" drive, 12 point, Long. Code 02020022
$54.00


Sockets 3/8" Female Torx

47 TX E 8
 STAHLWILLE 47 TX E 8 Uniflex Socket for external TORX screws. 43mm long. (2070008)
$81.00
47 TX E 10
STAHLWILLE 47 TX E 10 Uniflex Socket for external TORX screws. 44mm long. (2070010)
$81.00
47 TX E 12
STAHLWILLE 47 TX E 12 Uniflex Socket for external TORX screws. 46mm long. (2070012)
$81.00
47 TX E 14 STAHLWILLE 47 TX E 14 Uniflex Socket for external TORX screws. 48mm long. (2070014)
$81.00



Sockets 3/8" Metric Hex Bit - Short

49/7 STAHLWILLE 49/7 Metric Hex Bit Socket Set, 3/8" drive. With size 3, 4, 5, 6, 7, 8, 10mm. Overall length of 52mm. 
Stahlwille 49/7 Socket Set


$150.00
(Picture)
49-3 STAHLWILLE 49-3 Socket, Metric Hex Bit, 3/8" drive. 3mm. Overall Length 52. (2050003)
$25.00
49-4
STAHLWILLE 49-4 Socket, Metric Hex Bit, 3/8" drive. 4mm. Overall Length 52. (2050004)
$24.00
49-5
STAHLWILLE 49-5 Socket, Metric Hex Bit, 3/8" drive. 5mm. Overall Length 52. (2050005)
$23.00
49-6
STAHLWILLE 49-6 Socket, Metric Hex Bit, 3/8" drive. 6mm. Overall Length 52. (2050006)
$23.00
49-7
STAHLWILLE 49-7 Socket, Metric Hex Bit, 3/8" drive. 7mm. Overall Length 52. (2050007)
$24.00
49-8
STAHLWILLE 49-8 Socket, Metric Hex Bit, 3/8" drive. 8mm. Overall Length 52. (2050008)
$24.00
49-10
STAHLWILLE 49-10 Socket, Metric Hex Bit, 3/8" drive. 10mm. Overall Length 52. (2050010)
$24.00

Sockets 3/8" SAE Hex Bit - Short

49A-1/8 STAHLWILLE 49A-1/8 Socket, SAE Hex, 3/8" drive, 1/8mm. (2450008)
$29.00
49A-9/64 STAHLWILLE 49A-9/64 Socket, SAE Hex, 3/8" drive, 9/64mm. (2450009)
$30.00
49A-5/32 STAHLWILLE 49A-5/32 Socket, SAE Hex, 3/8" drive, 5/32mm. (2450010)
$29.00
49A-3/16 STAHLWILLE 49A-3/16 Socket, SAE Hex, 3/8" drive, 3/16mm. (2450012)
$28.00
49A-7/32 STAHLWILLE 49A-7/32 Socket, SAE Hex, 3/8" drive, 7/32mm. (2450014)
$29.00
49A-1/4 STAHLWILLE 49A-1/4 Socket, SAE Hex, 3/8" drive, 1/4mm. (2450016)
$29.00
49A-5/16 STAHLWILLE 49A-5/16 Socket, SAE Hex, 3/8" drive, 5/16mm. (2450020)
$32.00
49A-3/8 STAHLWILLE 49A-3/8 Socket, SAE Hex, 3/8" drive, 3/8mm. (2450024)
$33.00


Sockets 3/8" Torx Bit - Male

49TX/8 STAHLWILLE 49TX/8 Socket, Torx Bit, 3/8" drive. Set of 8 in Size T9, T10, T15, T20, T25, T27, T30, T40. (96021001)
$236.00
(Picture)
49TX-T30
STAHLWILLE 49TX-T30 Socket, Torx Bit, 3/8" drive. (2100030)
$28.00
49TX-T40
STAHLWILLE 49TX-T40 Socket, Torx Bit, 3/8" drive. (2100040) $28.00
49TX-T45
STAHLWILLE 49TX-T45 Socket, Torx Bit, 3/8" drive. (2100045) $29.00


Sockets 3/8" XZN - "Triple Square"


 

49X-M5
STAHLWILLE 49X-M5 Socket, XZN, Length 52mm, Bit length 20mm. 3/8" drive. Chrome Plated. (2060005)

$31.00

49X-M6
STAHLWILLE 49X-M6 Socket, XZN, Length 52mm, Bit length 20mm. 3/8" drive. Chrome Plated. (2060006)

$30.00

49X-M8
STAHLWILLE 49X-M8 Socket, XZN, Length 52mm, Bit length 20mm. 3/8" drive. Chrome Plated. (2060008)

$31.00

49X-M10
STAHLWILLE 49X-M10 Socket, XZN, Length 52mm, Bit length 20mm. 3/8" drive. Chrome Plated. (2060010)

$33.00


Sockets 3/8" Chrome Metric 6 Point

TYPE
456
STAHLWILLE Type 456 Socket  Metric 6 Point, 3/8" drive.

Stahlwille 456/13 Socket
                    Set, 6 Point

456-7 STAHLWILLE 456-7 Socket, Metric, 6 Point, 3/8" drive, 7mm. (2110007)
$18.00
456-8 STAHLWILLE 456-8 Socket, Metric, 6 Point, 3/8" drive, 8mm. (2110008) $17.00
456-9 STAHLWILLE 456-9 Socket, Metric, 6 Point, 3/8" drive, 9mm. (2110009) $17.00
456-10 STAHLWILLE 456-10 Socket, Metric, 6 Point, 3/8" drive, 10mm. (2110010)
$17.00
456-11 STAHLWILLE 456-11 Socket, Metric, 6 Point, 3/8" drive, 11mm. (2110011)
$18.00
456-12 STAHLWILLE 456-12 Socket, Metric, 6 Point, 3/8" drive, 12mm. (2110012)
$17.00
456-13 STAHLWILLE 456-13 Socket, Metric, 6 Point, 3/8" drive, 13mm. (2110013)
$17.00
456-14 STAHLWILLE 456-14 Socket, Metric, 6 Point, 3/8" drive, 14mm. (2110014)
$18.00
456-15 STAHLWILLE 456-15 Socket, Metric, 6 Point, 3/8" drive, 15mm. (2110015)
$19.00
456-16 STAHLWILLE 456-16 Socket, Metric, 6 Point, 3/8" drive, 16mm. (2110016)
$19.00
456-17 STAHLWILLE 456-17 Socket, Metric, 6 Point, 3/8" drive, 17mm. (2110017)
$18.00
456-18 STAHLWILLE 456-18 Socket, Metric, 6 Point, 3/8" drive, 18mm. (2110018)
$19.00
456-19 STAHLWILLE 456-19 Socket, Metric, 6 Point, 3/8" drive, 19mm. (2110019)
$18.00

Sockets 3/8" Metric Hex Bit - Long

2049-4 STAHLWILLE 2049-4 Socket, Hex Bit, Long, 3/8" drive, 4mm, 100mm in length. (2151004)

$28.00
(Picture)
2049-5 STAHLWILLE 2049-5 Socket, Hex Bit, Long, 3/8" drive, 5mm, 100mm in length. (2151005)

$28.00
2049-6 STAHLWILLE 2049-6 Socket, Hex Bit, Long, 3/8" drive, 6mm, 100mm in length. (2151006)

$28.00
2049-8 STAHLWILLE 2049-8 Socket, Hex Bit, Long, 3/8" drive, 8mm, 120mm in length. (2151008)

$29.00
2049-10 STAHLWILLE 2049-10Socket, Hex Bit, Long, 3/8" drive, 10mm, 120mm in length. (2151010)

$31.00
(Picture)


Sockets 1/2" Inch Drive - Quick Search

Quick
Search
Chrome - Metric  6 Point Hex Bit - Long Trisquare
Chrome - Metric 12 Point Hex Bit - Pilot Tip Trisquare Extra Long 
Chrome - Deep 12 Point Impact 6 Point XZN
Hex Bit - Metric RIBE-CV XZN Long
Hex Bit - Ball Point Tip Spline Drive

Torx Socket - SALE! Back to Top
1/2"
.
Sockets Impact 6 Point 1/2" Drive
.
50IMP-13 STAHLWILLE 50IMP-13 Socket, Impact, Metric, 1/2" drive, 6 Point, 13mm. (23010013)
$25.00
50IMP-14 STAHLWILLE 50IMP-14 Socket, Impact, Metric, 1/2" drive, 6 Point, 14mm. (23010014)
Stahlwille 50IMP-14 Impact Socket
$25.00
(Picture)
50IMP-17 STAHLWILLE 50IMP-17 Socket, Impact, Metric, 1/2" drive, 6 Point, 17mm. (23010017) $27.00
50IMP-19 STAHLWILLE 50IMP-19 Socket, Impact, Metric, 1/2" drive, 6 Point, 19mm. (23010019) $27.00

..........
Socket Chrome 12 point 1/2" Drive

50-8 STAHLWILLE 50-8 Socket, 12 Point, 1/2" drive, 8mm, 38mm long. (03010008)
$19.00
50-9 STAHLWILLE 50-9 Socket, 12 Point, 1/2" drive, 9mm, 38mm long. (03010009)
$20.00
50-10 STAHLWILLE 50-10 Socket, 12 Point, 1/2" drive, 10mm, 38mm long. (03010010)
$17.00
50-11 STAHLWILLE 50-11 Socket, 12 Point, 1/2" drive, 11mm, 38mm long. (03010011)
$18.00
50-12 STAHLWILLE 50-12 Socket, 12 Point, 1/2" drive, 12mm, 38mm long . (03010012)
$18.00
50-13 STAHLWILLE 50-13 Socket, 12 Point, 1/2" drive, 13mm, 38mm long . (03010013)
$16.00
50-14 STAHLWILLE 50-14 Socket, 12 Point, 1/2" drive, 14mm, 38mm long . (03010014)
$18.00
50-15 STAHLWILLE 50-15 Socket, 12 Point, 1/2" drive, 15mm, 38mm long. (03010015)
$18.00
50-16 STAHLWILLE 50-16 Socket, 12 Point, 1/2" drive, 16mm, 38mm long . (3010016)
$18.00
50-17 STAHLWILLE 50-17 Socket, 12 Point, 1/2" drive, 17mm, 38mm long. (03010017)
$18.00
50-18 STAHLWILLE 50-18 Socket, 12 Point, 1/2" drive, 18mm, 38mm long . (3010018)
$19.00
50-19 STAHLWILLE 50-19 Socket, 12 Point, 1/2" drive, 19mm, 38mm long. (03010019)
$18.00
50-20 STAHLWILLE 50-20 Socket, 12 Point, 1/2" drive, 20mm, 42mm long . (03010020)
$22.00
50-21 STAHLWILLE 50-21 Socket, 12 Point, 1/2" drive, 21mm, 42mm long . (03010021)
$22.00
50-22 STAHLWILLE 50-22 Socket, 12 Point, 1/2" drive, 22mm, 42mm long . (03010022)
$21.00
50-23 STAHLWILLE 50-23 Socket, 12 Point, 1/2" drive, 23mm, 42mm long . (03010023)
$25.00
50-24 STAHLWILLE 50-24 Socket, 12 Point, 1/2" drive, 24mm, 42mm long . (3010024)
$22.00
50-25 STAHLWILLE 50-25 Socket, 12 Point, 1/2" drive, 25mm, 42mm long . (3010025)
$29.00
50-26 STAHLWILLE 50-26 Socket, 12 Point, 1/2" drive, 26mm, 42mm long . (03010026)
$28.00
50-27 STAHLWILLE 50-27 Socket, 12 Point, 1/2" drive, 27mm, 45mm long . (03010027)
$29.00
50-28 STAHLWILLE 50-28 Socket, 12 Point, 1/2" drive, 28mm, 45mm long . (03010028)
$33.00
50-29 STAHLWILLE 50-29 Socket, 12 Point, 1/2" drive, 29mm, 45mm long - No longer available in this size.
$23.37
50-30 STAHLWILLE 50-30 Socket, 12 Point, 1/2" drive, 30mm, 45mm long . (03010030)
Stahlwille 50-30 Socket, 12
                    Point
$31.00
50-31 STAHLWILLE 50-31 Socket, 12 Point, 1/2" drive, 31mm, 48mm long. (03010031) $42.00
STAHLWILLE Type 50 Sockets, Sizes: 19, 20, 21, 22, 23, 24, 25, 26, 27, 28,  30 and 32mm, 12 Point, 1/2"
Stahlwille 50/12 Socket Set, 12 Point

( Picture 2 )     ( Picture 3 )

50-32 STAHLWILLE 50-32 Socket, 12 Point, 1/2" drive, 32mm, 48mm long. (03010032)
$31.00
50-34
STAHLWILLE 50-34 Socket, 12 Point, 1/2" drive, 34mm, 48mm long. (03010034) $40.00
50-36
STAHLWILLE 50-36 Socket, 12 Point, 1/2" drive, 36mm, 48mm long. (03010036) $45.00

.......... Socket Chrome Deep 12 Point 1/2" Drive



51-24 STAHLWILLE 51-24 Socket, Deep 12 Point, 1/2" drive, 24mm. 83mm in length. (3020024)
$51.00
51-27 STAHLWILLE 51-27 Socket, Deep 12 Point, 1/2" drive, 27mm. 83mm in length. (3020027) Also used for injection nozzles on Mercedes-Benz diesel engines. Type: OM601, OM602, OM603, OM615, OM616, OM617.91, OM617.93, OM617.95, OM621.
Stahlwille 51-27 Socket, Deep 12 Point
$57.00
51-30 STAHLWILLE 51-30 Socket, Deep 12 Point, 1/2" drive, 30mm. 83mm in length. (3020030)
$59.00
51-32 STAHLWILLE 51-32 Socket, Deep 12 Point, 1/2" drive, 32mm. 83mm in length. (3020032)
$65.00

.............

Socket Chrome 6 point 1/2" drive

52/9 STAHLWILLE 52/9 Socket Set, Metric, 1/2" drive, 6 Point, 17, 18, 19, 21 22, 24, 27, 30, 32. Note: No longer available as a set.

Stahlwille 52/9 Socket Set, 6 Point

Stahlwille 52/9 Socket Set, 1/2 Inch Drive
(Picture)
52-34 STAHLWILLE 52-34 Socket, Metric, 1/2"drive, 6 Point, 34mm. (03030034)
$36.00
52-32 STAHLWILLE 52-32 Socket, Metric, 1/2"drive, 6 Point, 32mm. (03030032)
$31.00
52-30 STAHLWILLE 52-30 Socket, Metric, 1/2"drive, 6 Point, 30mm. (03030030)
$29.00
52-28
STAHLWILLE 52-28 Socket, Metric, 1/2"drive, 6 Point, 28mm. (03030028)
$34.00
52-27 STAHLWILLE 52-27 Socket, Metric, 1/2"drive, 6 Point, 27mm. (03030027) 
$28.00
52-26
STAHLWILLE 52-26 Socket, Metric, 1/2"drive, 6 Point, 26mm. (03030026)
$27.00
52-25
STAHLWILLE 52-25 Socket, Metric, 1/2"drive, 6 Point, 25mm. (03030025)
$29.00
52-24 STAHLWILLE 52-24 Socket, Metric, 1/2"drive, 6 Point, 24mm . (03030024)
Stahlwille 52-24 Socket, 1/2 Inch Drive, 6
                    Point
$22.00
(Picture)
52-23
STAHLWILLE 52-23 Socket, Metric, 1/2"drive, 6 Point, 23mm. (03030023)
$25.00
52-22 STAHLWILLE 52-22 Socket, Metric, 1/2"drive, 6 Point, 22mm. (03030022)
$20.00
52-21 STAHLWILLE 52-21 Socket, Metric, 1/2"drive, 6 Point, 21mm. (03030021)
$21.00
52-20
STAHLWILLE 52-20 Socket, Metric, 1/2"drive, 6 Point, 20mm. (03030020)
$22.00
52-19 STAHLWILLE 52-19 Socket, Metric, 1/2"drive, 6 Point, 19mm. (03030019)
$18.00
52-18 STAHLWILLE 52-18 Socket, Metric, 1/2"drive, 6 Point, 18mm. (03030018)
$19.00
52-17 STAHLWILLE 52-17 Socket, Metric, 1/2"drive, 6 Point, 17mm. (03030017)
$18.00
52-16 STAHLWILLE 52-16 Socket, Metric, 1/2"drive, 6 Point, 16mm. (03030016) 
  $17.00
52-15 STAHLWILLE 52-15 Socket, Metric, 1/2"drive, 6 Point, 15mm. (03030015) 
 $18.00
52-14 STAHLWILLE 52-14 Socket, Metric, 1/2"drive, 6 Point, 14mm. (03030014)
$19.00
52-13 STAHLWILLE 52-13 Socket, Metric, 1/2"drive, 6 Point, 13mm. (03030013)
$16.00
52-12 STAHLWILLE 52-12 Socket, Metric, 1/2"drive, 6 Point, 12mm. (03030012)
$18.00
52-11 STAHLWILLE 52-11 Socket, Metric, 1/2"drive, 6 Point, 11mm. (03030011)
$18.00
52-10 STAHLWILLE 52-10 Socket, Metric, 1/2"drive, 6 Point, 10mm. (03030010) 
$17.00
52-9 STAHLWILLE 52-9 Socket, Metric, 1/2"drive, 6 Point, 9mm. (03030009)
$19.00
52-8 STAHLWILLE 52-8 Socket, Metric, 1/2"drive, 6 Point, 8mm. (03030008)
$19.00


Hex Bit Socket 1/2" drive

SF54/4 STAHLWILLE SF54/4 Socket, Hex Bit set, 1/2" drive, 60mm long, with size 10, 12, 14, 17mm. Note: No longer available as a set. See individual sizes below.
Stahlwille 54/4 Hex Bit Sockets


(Picture)
54-4
STAHLWILLE 54-4 Socket, Hex Bit 4mm, 1/2" drive, 60mm long. (3050004)
$25.00
54-5
STAHLWILLE 54-5 Socket, Hex Bit 5mm, 1/2" drive, 60mm long. (3050005)
$25.00

54-6
STAHLWILLE 54-6 Socket, Hex Bit 6mm, 1/2" drive, 60mm long. (3050006)

 $25.00

54-8
STAHLWILLE 54-8 Socket, Hex Bit 8mm, 1/2" drive, 60mm long. (3050008)

$25.00
54-10 STAHLWILLE 54-10 Socket, Hex Bit 10mm, 1/2" drive, 60mm long. (3050010)
$27.00
54-12 STAHLWILLE54-12 Socket, Hex Bit 12mm, 1/2" drive, 60mm long. (3050012) 
$30.00
54-14 STAHLWILLE 54-14 Socket, Hex Bit 14mm, 1/2" drive, 60mm long. (3050014)
$33.00
54-17 STAHLWILLE 54-17 Socket, Hex Bit 17mm, 1/2" drive, 60mm long. (3050017)
$36.00
54-19 STAHLWILLE 54-19 Socket, Hex Bit 19mm, 1/2" drive, 60mm long. (3050019)

$47.00

.................
Hex Bit Socket Ball Point Tip 1/2" Drive

54KK-7 STAHLWILLE 54KK-7 Socket, Ball Tip Hex Bit, 1/2" drive, 100mm long, 7mm. (3280007)
Stahlwille 54KK-7 Ball Tip Hex Bit Socket

$36.00
54KK-6 STAHLWILLE 54KK-6 Socket, Ball Tip Hex Bit, 1/2" drive, 100mm long, 6mm. (3280006)
$33.00
(Picture)

54KK-5 STAHLWILLE 54KK-5 Socket, Ball Tip Hex Bit, 1/2" drive, 100mm long, 5mm. (3280005)
$33.00
(Picture)


...................
RIBE-CV Socket 1/2" Drive

Stahlwille 54CV-M16 RIBE-CV Socket
54CV-M5 STAHLWILLE 54CV-M5 Socket, RIBE-CV, 1/2" drive, M5 size. (3090005)
$30.00
54CV-M6 STAHLWILLE 54CV-M6 Socket, RIBE-CV, 1/2" drive, M6 size. (3090006)
$28.00
(Picture)
54CV-M7
STAHLWILLE 54CV-M7 Socket, RIBE-CV, 1/2" drive, M7 size. (3090007)
$35.00
54CV-M8 STAHLWILLE 54CV-M8 Socket, RIBE-CV, 1/2" drive, M8 size. (3090008)
$28.00
(Picture)
54CV-M9 STAHLWILLE 54CV-M9 Socket, RIBE-CV, 1/2" drive, M9 size. (3090009)
$38.00
54CV-M10 STAHLWILLE 54CV-M10 Socket, RIBE-CV, 1/2" drive, M10 size . (3090010)
 $31.00
(Picture)
54CV-M12 STAHLWILLE 54CV-M12 Socket, RIBE-CV, 1/2" drive, M12 size . (3090012)
Stahlwille 54CV-M12 Socket
$34.00
(Picture)
54CV-M13
STAHLWILLE 54CV-M13 Socket, RIBE-CV, 1/2" drive, M13 size. (3090013)
$47.00
54CV-M14 STAHLWILLE 54CV-M14 Socket, RIBE-CV, 1/2" drive, M14 size. (3090014)
$39.00
54CV-M16 STAHLWILLE 54CV-M16 Socket, RIBE-CV, 1/2" drive, M16 size . (3090016)
Stahlwille 54CV-M16 RIBE-CV Socket
$42.00





Spline Drive Sockets 1/2" Drive


Stahlwille 50aPSP Spline Drive
                  Sockets

50aPSP12
(3012024)
STAHLWILLE 50aPSP-12 Spline Socket, 1/2" drive. Spline size #12 for a 3/8" nut. Overall Length 38mm.
Made to Military Specification MS-33787 with HPQ high performance steel with gunmetal finish.
$33.00
50aPSP14
(3012028)
STAHLWILLE 50aPSP-14 Spline Socket, 1/2" drive. Spline size #14 for a 7/16" nut. Overall Length 38mm.
Made to Military Specification MS-33787 with HPQ high performance steel with gunmetal finish.
$32.00
50aPSP18
(3012034)
STAHLWILLE 50aPSP-18 Spline Socket, 1/2" drive. Spline size #18  for a 9/16" nut. Overall Length 38mm.
Made to Military Specification MS-33787 with HPQ high performance steel with gunmetal finish.
$39.00
50aPLSP14
(3013028)
STAHLWILLE 50aPLSP-14 Spline Socket, 1/2" drive. Spline size #14 for a 7/16" nut. Overall Length 50mm.
Made to Military Specification MS-33787 with HPQ high performance steel with gunmetal finish.
$29.00


TORX Screwdriver Socket 1/2" Drive

50TX-E14 STAHLWILLE 50TX-E14 Socket, Torx E14, 1/2" drive. TORX size 12.9mm, 38mm in length. (3270014) Limited Quantity at this price!
  
SALE!
$17.99
$27.00



 
Trisquare XZN Sockets 1/2" Drive

XZN The XZN standard has 12 points. They are very sharp points. Some people call these "triple square". You can determine the size if you measure from point to point across the hole at the longest distance. An XZN 8 will measure about 8mm. An XZN-10 will measure about 10mm etc. Please measure for your application. .
54X-M16 STAHLWILLE 54X-M16 Socket, XZN bit, 1/2" drive, M16 size, 60mm long, 174g, Good for tri-square socket head screws. (3060016)
Stahlwille 54X-M16, XZN Bit Socket

$39.00
(Picture)
54X-M14 STAHLWILLE 54X-M14 Socket, XZN bit, 1/2" drive, M14 size 60mm long, 128g, Good for tri-square socket head screws.  (3060014)
$39.00
54X-M12 STAHLWILLE 54X-M12 Socket, XZN bit, 1/2" drive, M12 size 60mm long, 120g, Good for tri-square socket head screws. (3060012)
Stahlwille 54X-M12, XZN Bit Socket

$37.00
(Picture)

54X-M10
STAHLWILLE 54X-M10 Socket, XZN bit, 1/2" drive, M10 size 60mm long, 94g, Good for tri-square socket head screws. (3060010)
 Stahlwille 54X-M10, XZN Bit Socket

$34.00
54X-M8 STAHLWILLE 54X-M8 Socket, XZN bit, 1/2" drive, M8 size 60mm long, 79g, Good for tri-square socket head screws. (3060008)
$30.00
54X-M6 STAHLWILLE 54X-M6 Socket, XZN bit, 1/2" drive, M6 size 60mm long, 74g, Good for tri-square socket head screws. (3060006)
$29.00
54X-M5 STAHLWILLE 54X-M5 Socket, XZN bit, 1/2" drive, M5 size 60mm long, 67g, Good for tri-square socket head screws. (3060005)
$30.00


Pilot Tip Hex Bit Socket 1/2" Drive


Stahlwille 54IC Pilot Tip Hex Bit Sockets

54IC-5
STAHLWILLE 54IC-5 Pilot tip socket, INHEX, 1/2" drive, blade length 22mm, tip size 5mm hex. Overall length 60mm. For hexagon socket head screws with guided pin. (3070005)


$29.00
54IC-6 STAHLWILLE 54IC-6 Pilot tip socket, INHEX, 1/2" drive, blade length 22mm, tip size 6mm hex. Overall length 60mm. (3070006)
Stahlwille 54IC-6 Pilot Tip Socket





$29.00
54IC-8 STAHLWILLE 54IC-8 Pilot tip socket, INHEX, 1/2" drive, blade length 22mm, tip size 8mm hex. Overall length 60mm. (3070008)


$32.00
54IC-10 STAHLWILLE 54IC-10 Pilot tip socket, INHEX, 1/2" drive, blade length 22mm, tip size 10mm hex. Overall length 60mm. (3070010)

$34.00
54IC-12 STAHLWILLE 54IC-12 Pilot tip socket, INHEX, 1/2" drive, blade length 20mm, tip size 12mm hex. Overall length 60mm. (3070012)
STAHLWILLE 54IC-12 Pilot Tip Hex Bit


$39.00



54IC-14 STAHLWILLE 54IC-14 Pilot tip socket, INHEX, 1/2" drive, blade length 20mm, tip size 14mm hex. Overall length 60mm. (3070014)


$40.00
54IC/6 Sthalwille 54IC/6 Pilot tip socket set, 6 piece. Includes sizes 5, 6, 8, 10, 12 and 14.
$183.00


Extra Long Trisquare XZN Socket 1/2" Drive

3054X-M14 STAHLWILLE 3054X-M14 Socket, XZN bit. 140mm long, "triple square" M14, 140mm long, 225g. Good for trisquare screws, extra long. (03261414)
 $48.00
(Picture)
3054X-M10
STAHLWILLE 3054X-M10 Socket, Long XZN bit. 1/2" drive, M10 size, 110mm (4-5/16") long. (03261410)
See
Mercedes
Page


Long Hex Bit Socket 1/2" Drive

1054/12 STAHLWILLE 1054/12 Socket, Hex Bit, 1/2" drive, 12mm, 140mm long, 160g.  Stahlwille suggests this size is good for installing radiators. (03151412)
$35.00
1054/10 STAHLWILLE 1054/10 Socket, Hex Bit, 1/2" drive, 10mm, 140mm long.Good for Mercedes-Benz cylinder heads on some cars. (03151410). MB number 000 589 05 07 00

Stahlwille 1054/12 Long Hex Bit Socket
$30.00
(Picture)
1054/8K
STAHLWILLE 1054/8K Socket, Hex Bit, 1/2" drive, 8mm, 120mm long. 104g. Good for hexagon socket head screws. (03151208)
$28.00
2054/14 STAHLWILLE 2054/14 Socket, Hex Bit, 1/2" drive, 14mm, 140mm long, 231g, Good for hexagon socket head screws. (03151414)
$37.00
(Picture)
2054/7 STAHLWILLE 2054/7 Socket, Hex Bit, 1/2" drive, 7mm, 120mm long, 96g. Good for hexagon socket head screws. (03151207)
$28.00
2054/6 STAHLWILLE 2054/6 Socket, Hex Bit, 1/2" drive, 6mm, 120mm long, 84g, Good for hexagon socket head screws. (03151206)
$26.00
2054/5 STAHLWILLE 2054/5 Socket, Hex Bit, 1/2" drive, 5mm, 120mm long, 78g, Good for hexagon socket head screws. (03151205)
$26.00

.
Sockets 3/4" Drive
.
55-50 STAHLWILLE 55-50 Socket, Metric, 3/4" drive, 6 Point, 50mm. (5010050)
$97.00
(Picture)
55-46 STAHLWILLE 55-46 Socket, Metric, 3/4" drive, 6 Point, 46mm. (5010046)
Stahlwille 55-46 Socket, 6 Point
$86.00
(Picture)
55-41 STAHLWILLE 55-41 Socket, Metric, 3/4" drive, 6 Point, 41mm. (5010041)
$79.10
(Picture)
55-38 STAHLWILLE 55-38 Socket, Metric, 3/4" drive, 6 Point, 38mm. (5010038) Special Order $56.00
55-36 STAHLWILLE 55-36 Socket, Metric, 3/4" drive, 6 Point, 36mm. (5010036)
$52.00
55-34 STAHLWILLE 55-34 Socket, Metric, 3/4" drive, 6 Point, 34mm. (5010034)  Special Order $51.00
55-33 STAHLWILLE 55-33 Socket, Metric, 3/4" drive, 6 Point, 33mm. (5010033)  Special Order $56.00
55-32 STAHLWILLE 55-32 Socket, Metric, 3/4" drive, 6 Point, 32mm. (5010032)
$42.00
55-30 STAHLWILLE 55-30 Socket, Metric, 3/4" drive, 6 Point, 30mm. (5010030)  Special Order $42.00
59-22 STAHLWILLE 59-22 Socket, Metric, 3/4" drive, hex bit, 22mm. (5050022)

$99.00
(Picture)

.
Sockets 1" Drive
.
. All 1" drive tools are special order. Price on Request. .

.
Spark Plug tools
.
51-20.8 STAHLWILLE 51-20.8 Spark plug socket, 20.8mm or 13/16", with rubber insert. 1/2" drive 12 point, 83mm in length. (3020208)
$61.00
(Picture)
51S-20.8 STAHLWILLE 51S-20.8 Spark plug socket, 20.8mm or 13/16". With rubber insert for spark plugs and for tightening and un-tightening wheel nuts on Japanese cars.1/2" drive. 6 point, 83mm in length. (3240208)
Stahlwille 51S-20.8 Spark Plug Socket

$61.00
(Picture)
4606 STAHLWILLE 4606 Spark plug socket 3/8" drive;  18mm  (11/16");  65mm (2-1/2") long. With rubber insert to hold plug. (02130018) NOTE: Stahlwille lists this as 18mm, but 11/16" is closer to 17.5mm.  And some customers report their service manual calls for 17mm. It's very confusing!

$42.00
10626 STAHLWILLE 10626 Pliers, Spark Plug Boot Pliers. (76530001). No Longer Available

$84.55
(Picture)
12375 STAHLWILLE 12375 Spark Plug brush. (74160001)
$6.00

.
Suspension Tools
.
11041-1 STAHLWILLE 11041N-1 Ball Joint Seperator, 18mm fork, inside 36mm wide, 36mm tall, for cars. (71230011)
$110.00
(Picture)
11041-2 STAHLWILLE 11041N-2 Ball Joint Separator, 23mm fork, inside 44mm wide, 45mm tall, for cars and vans. (71230012)
$146.00
(Picture)
11041-3 STAHLWILLE 11041N-3 Ball Joint Separator, 29mm fork, inside 55mm wide, 60mm tall, for trucks. (71230013) Special Order $187.00
(Picture)
11041-4 STAHLWILLE 11041N-4 Ball Joint Separator, 39mm fork, inside 62mm wide, 75mm tall,  for trucks. (71230014) Special Order $247.00
(Picture)
12616N STAHLWILLE 12616 Ball Joint Separator, Universal Adjustable, Fork opening 18-22mm, height 20-50mm. (71050010)  Note: This will be taken apart for shipment if needed to fit a Small Flat Rate Box. You will need to screw it back together.
$210.00
(Picture)
12623N STAHLWILLE 12623 Ball Joint Separator, 20-22mm fork, Universal, opens to 50mm, two pin positions. (71050011) Out of stock. See KUKKO 129-0 tool.
$276.00
(Picture)
12763 STAHLWILLE 12763 Pull Hook for Rubber Exhaust Mountings. (74200002)
$52.00
(Picture)

.
Tool Box
.
924  STAHLWILLE 924 Magazine Stopper that is made to hold your box of tools on an inclined surface such as an aeroplane wing. It will prevent them from sliding off and causing an "incident". The stopper is small but powerful. It is around 120mm (4 3/4") tall. The rubber cup is around 55mm (2 3/16") across. You can slide the stopper bracket over the edge of your tool magazine. Flip the lever down and a powerful suction is created to hold your box in place. No Longer Available.

$117.98
(Picture)
95
STAHLWILLE 95 ROLLMASTER Tool Trolley.  With 3 swivel trays. Presented for Historical Significance.
No Longer Available. No restoration parts are available.


 Priceless


13217
STAHLWILLE 13217 Tool box. Exrtemely sturdy, tool box resilient to loads and made of polypropylene for professional use. Five easily removed lockable drawers with transparent cover, with endstops for the extendible rails, 3 different drawer heights. Drawers can be inserted in any order with one top cover and one front cover, both folding. The top cover is fitted with napped foam to hold tools firmly in place. One removable tray with 2 handles and 2 transparent drawer covers under the top cover. Drawers can be used as separate tool boxes using the transparent cover. Tools case and drawers can be individually marked. Two smooth-running twin castors on the telescopic-handle side. Adaptable for vertical transport using 4 castors R 13217 Set of castors (please order separately). Extendible telescopic handle facilitates transport. Two carrying handles at the sides. Resistant to Skydrol, acetone, petrol and hydraulic fluids. Carrying capacity 60 kg. Three locking positions with padlock.
Stahlwille 13217 Orange Tool Box  

Stahlwille 13217 Tool Boxes
NOTE: Shipping Weight 36 Pounds. Box 24"x20"x16"

13217 LGE
Code:
81091301
STAHLWILLE 13217 Tool Box in LUMINOUS YELLOW.
$1,470.00
13217 LOR
Code:
81091302
STAHLWILLE 13217 Tool Box in LUMINOUS ORANGE. No longer available in this color. $1,252.00
13217 LR
Code:
81091304
STAHLWILLE 13217 Tool Box in LUMINOUS RED.  $1,470.00
13217 TS
Code:
81091306
STAHLWILLE 13217 Tool Box in JET BLACK.
$1,470.00
13217 TS IP67 Code: 81091322 STAHLWILLE 13217 Tool Box in JET BLACK with water and dust seals for protection and an extra drawer. There is a special valve for pressure relief.
$1,633.00
13217 TS RF Code: 96894809 STAHLWILLE 13217 Tool Box in JET BLACK with reflective film.
$1,917.00
R13217
Code:
96894805
STAHLWILLE R13217 Optional Set of Castors to allow upright travel on 4 wheels.  Set of 4 swiveling castors, 2 of which have parking brakes.
Stahlwille R13217 Casters for 13217 Tool
                      Boxes
$190.00
.

Tool Rolls

 013/17
STAHLWILLE 013/17 Pc Wallet, plastic wallet with 17 pockets. No Longer Available. The catalog still lists a wallet for 10/12 set , 12/10 set, 12/15 set, or 23/8 set.
Stahlwille 013/17 Plastic Tool Wallet
$27.95
(Picture)


.
Wrenches- Adjustable
.
4025-4
STAHLWILLE 4025-4 Wrench, Adjustable, 13mm max opening, Overall 114mm (4") long. (40250104)
Stahlwille 4025-4 Adjustable Wrench
$54.00
(Picture)
4025-6 STAHLWILLE 4025-6 Wrench, Adjustable, 20mm max opening. Overall 159mm (6 inch) long. (40250106) $59.00
(Picture)
4025-8 STAHLWILLE 4025-8 Wrench, Adjustable, 24mm max opening. Overall 206mm (8 inch ) long. (40250108)
$70.00
(Picture)
12910-1 STAHLWILLE 12910-1 Wrench, Adjustable hook spanner, 20-42mm. (44010001) $76.00
(Picture)

.
Wrenches- Box Spanner
.
10750/7 STAHLWILLE 10750/7 Metric Box Spanner Wrench Set. Made to DIN896 form B standard. Double End. Tommy bar not included. Made from seamlessly drawn steel tubing, chrome alloy steel, chrome plated and polished. With 7 wrenches of size 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22mm.   (96431202)
$151.00
(Picture)



.
Wrenches- Combination - Metric - Short (Type 13)
.

Stahlwille Type 13 Combination Wrenches

13-5.5 STAHLWILLE 13-5.5 Wrench, Combination Open/Box, type 13, 100mm long 40085500
$20.00
13-6 STAHLWILLE 13-6 Wrench, Combination Open/Box, type 13, 105mm long 40080606
$18.00
13-7 STAHLWILLE 13-7 Wrench, Combination Open/Box, type 13, 110mm long 40080707
$18.00
13-8 STAHLWILLE 13-8 Wrench, Combination Open/Box, type 13, 115mm long 40080808
$17.00
13-9 STAHLWILLE 13-9 Wrench, Combination Open/Box, type 13, 120mm long 40080909
$20.00
13-10 STAHLWILLE 13-10 Wrench, Combination Open/Box, type 13, 125mm long 40081010
$20.00
13-11 STAHLWILLE 13-11 Wrench, Combination Open/Box, type 13, 135mm long 40081111
$21.00
13-12 STAHLWILLE 13-12 Wrench, Combination Open/Box, type 13, 140mm long 40081212
$22.00
13-13 STAHLWILLE 13-13 Wrench, Combination Open/Box, type 13, 160mm long 40081313
$24.00
13-14 STAHLWILLE 13-14 Wrench, Combination Open/Box, type 13, 165mm long 40081414
$24.00
13-15 STAHLWILLE 13-15 Wrench, Combination Open/Box, type 13, 170mm long 40081515
$28.00
13-16 STAHLWILLE 13-16 Wrench, Combination Open/Box, type 13, 180mm long 40081616
$31.00
13-17 STAHLWILLE 13-17 Wrench, Combination Open/Box, type 13, 190mm long 40081717
$32.00
13-18 STAHLWILLE 13-18 Wrench, Combination Open/Box, type 13, 200mm long 40081818
$36.00
13-19 STAHLWILLE 13-19 Wrench, Combination Open/Box, type 13, 230mm long 40081919
$37.00
13-20
STAHLWILLE 13-20 Wrench, Combination Open/Box, type 13, 230mm long 40082020
$44.00
13-21 STAHLWILLE 13-21 Wrench, Combination Open/Box, type 13, 260mm long 40082121
$46.00
13-22 STAHLWILLE 13-22 Wrench, Combination Open/Box, type 13, 260mm long 40082222  $46.00
13-24 STAHLWILLE 13-24 Wrench, Combination Open/Box, type 13, 280mm long 40082424  $52.00
13-27 STAHLWILLE 13-27 Wrench, Combination Open/Box, type 13, 300mm long 40082727 $63.00
13-30 STAHLWILLE 13-30 Wrench, Combination Open/Box, type 13, 330mm long 40083030
$78.00
13-32 STAHLWILLE 13-32 Wrench, Combination Open/Box, type 13, 360mm long 40083232
$83.00
13-36 STAHLWILLE 13-36 Wrench, Combination Open/Box, type 13, 460mm long 40083636
$147.00
13-41 STAHLWILLE 13-41 Wrench, Combination Open/Box, type 13, 480mm long 40084141
$183.00
13/9 Stahlwille 13/9 Metric Combination Open/Box Set with Roll Pouch. Type 13 wrench made to DIN 3113 Form A standard. Set of 9 wrenches with sizes: 9, 10, 11, 12, 13, 14, 17, 19, and 22mm. Also includes a textile roll-up pouch with Velcro fastener. (96400801)
 
  
$179.99
$243.40


SF13/13 STAHLWILLE SF13/13 Wrench SET, Combination Open/Box Set, type 13, includes sizes:  7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm. Weighs 972g. Note: This set is put together for the USA market, it is not listed in the STAHLWILLE catalog.
Stahlwille SF13/13 Combination Wrench Set


$330.00
$264.00
(Picture)
13/26 STAHLWILLE 13/26 (96400805) Wrench SET, Combination Open/Box Set, type 13 With Metric Size: 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 25; 26; 27; 28; 29; 30; 32mm. Packed loose. Contact us for a current offer.
$1,058.00





Wrenches - Combination - SAE - Short (Type 13a)

13a-3/16
STAHLWILLE 13a-3/16 Short SAE Combination Wrench Open/Box 3/16" Type 13a, 95mm long. (40481212) $25.00
13a-13/64
STAHLWILLE 13a-13/64 Short SAE Combination Wrench Open/Box 13/64" Type 13a, 95mm long. (40481313) $25.00
13a-7/32
STAHLWILLE 13a-7/32 Short SAE Combination Wrench Open/Box 7/32" Type 13a, 95mm long. (40481414) $24.00
13a-15/64
STAHLWILLE 13a-15/64 Short SAE Combination Wrench Open/Box 15/64" Type 13a, 95mm long. (40481515) $25.00
13a-1/4
STAHLWILLE 13a-1/4 Short SAE Combination Wrench Open/Box 1/4" Type 13a, 105mm long. (40481616) $19.00
13a-9/32
STAHLWILLE 13a-9/32 Short SAE Combination Wrench Open/Box 9/32" Type 13a, 110mm long. (40481818) $22.00
13a-5/16
STAHLWILLE 13a-5/16 Short SAE Combination Wrench Open/Box 5/16" Type 13a, 115mm long. (40482020) $20.00
13a-11/32
STAHLWILLE 13a-11/32 Short SAE Combination Wrench Open/Box 11/32" Type 13a, 120mm long. (40482222) $23.00
13a-3/8
STAHLWILLE 13a-3/8 Short SAE Combination Wrench Open/Box 3/8" Type 13a, 125mm long. (40482424) $23.00
13a-7/16
STAHLWILLE 13a-7/16 Short SAE Combination Wrench Open/Box 7/16" Type 13a, 135mm long. (40482828) $24.00
13a-1/2
STAHLWILLE 13a-1/2 Short SAE Combination Wrench Open/Box 1/2" Type 13a, 160mm long. (40483232)

$25.00
(Pic 2)
13a-9/16
STAHLWILLE 13a-9/16 Short SAE Combination Wrench Open/Box 9/16" Type 13a, 165mm long. (40483434) $28.00
13a-19/32
STAHLWILLE 13a-19/32 Short SAE Combination Wrench Open/Box 19/32" Type 13a, 170mm long. (40483535) $35.00
13a-5/8
STAHLWILLE 13a-5/8 Short SAE Combination Wrench Open/Box 5/8" Type 13a, 180mm long. (40483636) $32.00
13a-11/16
STAHLWILLE 13a-11/16 Short SAE Combination Wrench Open/Box 11/16" Type 13a, 200mm long. (40483838) $41.00
13a-3/4
STAHLWILLE 13a-3/4 Short SAE Combination Wrench Open/Box 3/4" Type 13a, 230mm long. (40484040) $41.00
13a-25/32
STAHLWILLE 13a-25/32 Short SAE Combination Wrench Open/Box 25/32" Type 13a, 235mm long. (40484141) $51.00
13a-13/16
STAHLWILLE 13a-13/16 Short SAE Combination Wrench Open/Box 13/16" Type 13a, 260mm long. (40484242) $49.00
13a-7/8
STAHLWILLE 13a-7/8 Short SAE Combination Wrench Open/Box 7/8" Type 13a, 260mm long. (40484444) $52.00
13a-15/16
STAHLWILLE 13a-15/16 Short SAE Combination Wrench Open/Box 15/16" Type 13a, 280mm long. (40484646) $60.00
13a-1
STAHLWILLE 13a-1 Short SAE Combination Wrench Open/Box 1" Type 13a, 300mm long. (40484848) $57.00

NOTE: Special Order, Sizes available up to 2" Inch

Wrenches- Combination - Long  (Type 14)


Stahlwille Type 14 Long
                  Combination Wrenches
Made to Standard DIN 3113 Form B  and ISO 7738 form B.  Chrome Alloy Steel
and Chrome Plated. With 10 degree offset box ends.

14-6
STAHLWILLE 14-6 Wrench, Long Combination Open/Box 6mm, Type 14, 115mm long. (40100606)
$20.00
14-7 STAHLWILLE 14-7 Wrench, Long Combination Open/Box 7mm, Type 14, 135mm long. (40100607)
 $18.00
14-8 STAHLWILLE 14-8 Wrench, Long Combination Open/Box 8mm, Type 14, 145mm long. (40100608)
$19.00
14-9 STAHLWILLE 14-9 Wrench, Long Combination Open/Box 9mm, Type 14, 155mm long. (40100609)
$22.00
14-10 STAHLWILLE 14-10 Wrench, Long Combination Open/Box 10mm, Type 14, 165mm long. (40101010)

Stahlwille 14-10 Long Combination Wrench       Stahlwille 14-10 Long Combination Wrench
        
$21.00
14-11 STAHLWILLE 14-11 Wrench, Long Combination Open/Box 11mm, Type 14, 180mm long. (40101111)

$23.00
(Picture)
14-12 STAHLWILLE 14-12 Wrench, Long Combination Open/Box 12mm, Type 14, 180mm long. (40101212)
 

Stahlwille 14-12 Long Combination
                    Wrench
$23.00
(Picture)
14-13 STAHLWILLE 14-13 Wrench, Long Combination Open/Box 13mm, Type 14, 195mm long. (40101313)
 

Stahlwille Germany 13mm Wrench
$25.00
14-14 STAHLWILLE 14-14 Wrench, Long Combination Open/Box 14mm, Type 14, 210mm long. (40101414)
 
$25.00
14-15 STAHLWILLE 14-15 Wrench, Long Combination Open/Box 15mm, Type 14, 215mm long. (40101515)
 
$30.00
14-16 STAHLWILLE 14-16 Wrench, Long Combination Open/Box 16mm, Type 14, 230mm long. (40101616)

$33.00
14-17 STAHLWILLE 14-17 Wrench, Long Combination Open/Box 17mm, Type 14, 240mm long. (40101717)
 
$34.00
14-18 STAHLWILLE 14-18 Wrench, Long Combination Open/Box 18mm, Type 14, 255mm long. (40101818)
$37.00
14-19 STAHLWILLE 14-19 Wrench, Long Combination Open/Box 19mm, Type 14, 265mm long. (40101919)
( Pic 2)   (Pic 3)    (Pic 4)

$39.00
(Picture)
Stahlwille
Type 14

Set 10
STAHLWILLE Type 14 Wrench SET 10, Combination Open/Box Set, type 14, includes sizes 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm. AS drive and slender I-beam style handle. With 10 degree offset box ends.

$290.00
$232.00

(Pic 2)

(Pic 3)

(Pic 4)
14-20
STAHLWILLE 14-20 Wrench, Long Combination Open/Box 20mm, Type 14, 280mm long. (40102020)
$43.00
14-21 STAHLWILLE 14-21 Wrench, Long Combination Open/Box 21mm, Type 14, 280mm long. (40102121)
$44.00
14-22 STAHLWILLE 14-22 Wrench, Long Combination Open/Box 22mm, Type 14, 300mm long. (40102222) ( Pic 2 )

$47.00
(Picture)

14-24 STAHLWILLE 14-24 Wrench, Long Combination Open/Box 24mm, Type 14, 330mm long. (40102424)
$54.00
14-27 STAHLWILLE 14-27 Wrench, Long Combination Open/Box 27mm, Type 14, 385mm long. (40102727)
$62.00
14-30 STAHLWILLE 14-30 Wrench, Long Combination Open/Box 30mm, Type 14, 415mm long. (40103030)
$78.00
14-32 STAHLWILLE 14-32 Wrench, Long Combination Open/Box 32mm, Type 14, 430mm long. (40103232)
$83.00
14-36 STAHLWILLE 14-36 Wrench, Long Combination Open/Box 36mm, Type 14, 480mm long. (40103636)
$149.00
SF14/13 STAHLWILLE 14/13 Wrench SET, Combination Open/Box Set, type 14, includes sizes 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm. AS drive and slender I-beam style handle. With 10 degree offset box ends. Note: This set is put together for the USA market, it is not listed in the STAHLWILLE catalog.
  

      
$349.00
$279.00
(Picture)
.
.
Wrenches- Crowfoot Spanner
.
540-8 STAHLWILLE 540-8 Crow-foot spanner, 8mm, 3/8" dr. (01200008) Special Order Only!
$73.00
540-9 STAHLWILLE 540-9 Crow-foot spanner, 9mm, 3/8" dr. (01200009) Special Order Only!
$73.00
540-10 STAHLWILLE 540-10 Crow-foot spanner, 10mm, 3/8" dr. (01200010) Special Order Only!
$73.00
540-11 STAHLWILLE 540-11 Crow-foot spanner, 11mm, 3/8" dr. (02200011) Special Order Only!
$78.00
540-12 STAHLWILLE 540-12 Crow-foot spanner, 12mm, 3/8" dr. (02200012) Special Order Only!
$72.00
540-13 STAHLWILLE 540-13 Crow-foot spanner, 13mm, 3/8" dr. (02200013) Special Order Only!
$72.00
540-14 STAHLWILLE 540-14 Crow-foot spanner, 14mm, 3/8" dr. (02200014) Special Order Only!
$67.00
540-15 STAHLWILLE 540-15 Crow-foot spanner, 15mm, 3/8" dr. (02200015) Special Order Only! $86.00
540-16 STAHLWILLE 540-16 Crow-foot spanner, 16mm, 3/8" dr. (02200016) Special Order Only!
$87.00
540-17 STAHLWILLE540-17 Crow-foot spanner, 17mm, 3/8" dr. (02200017)
Stahlwille 540-17 Crow-Foot Spanner

$81.00
(Picture)
540-18 STAHLWILLE 540-18 Crow-foot spanner, 18mm, 3/8" dr. (02200018) Special Order Only!
$95.00
540-19 STAHLWILLE 540-19 Crow-foot spanner, 19mm, 3/8" dr. (02200019)
Stahlwille 540-19 Crow-Foot Spanner
$81.00
(Picture)
540-20 STAHLWILLE 540-20 Crow-foot spanner, 20mm, 3/8" drive. (02200020) Special Order Only!
$109.00
540-21 STAHLWILLE 540-21 Crow-foot spanner, 21mm, 3/8" drive. (02200021) Special Order Only!
$109.00
540-22 STAHLWILLE 540-22 Crow-foot spanner, 22mm, 3/8" drive. (02200022) Special Order Only!
$109.00
540-23 STAHLWILLE 540-23 Crow-foot spanner, 23mm, 3/8" drive. (02200023) Special Order Only!
$117.00
540-24 STAHLWILLE 540-24 Crow-foot spanner, 24mm, 3/8" drive. (02200024) Special Order Only!
$112.00
540-25 STAHLWILLE 540-25 Crow-foot spanner, 25mm, 3/8" drive. (02200025) Special Order Only!
$117.00
540-26 STAHLWILLE 540-26 Crow-foot spanner, 26mm, 3/8" drive. (02200026) Special Order Only!
$112.00
540-27 STAHLWILLE 540-27 Crow-foot spanner, 27mm, 3/8" drive. (02200027)
Stahlwille 540-27 Crow-Foot Spanner

$110.00
(Picture)
540-28 STAHLWILLE 540-28 Crow-foot spanner, 28mm, 3/8" drive. (02200028) Special Order Only!
$119.00
540-30 STAHLWILLE 540-30 Crow-foot spanner, 30mm, 3/8" drive. (02200030) Special Order Only!
$110.00
540-32 STAHLWILLE 540-32 Crow-foot spanner, 32mm, 3/8" drive. (02200032) Special Order Only!
$110.00
540-34 STAHLWILLE 540-34 Crow-foot spanner, 34mm, 3/8" drive. (02200034) Special Order Only!
$121.00
540-36 STAHLWILLE 540-36 Crow-foot spanner, 36mm, 3/8" drive. (02200036) Special Order Only!
$137.00
540-40 STAHLWILLE 540-40 Crow-foot spanner, 40mm, 3/8" drive. (02200040) Special Order Only!
$168.00
540-41 STAHLWILLE 540-41 Crow-foot spanner, 41mm, 3/8" drive. (02200041) Special Order Only!
$197.00
540-42 STAHLWILLE 540-42 Crow-foot spanner, 42mm, 3/8" drive. (02200042) Special Order Only!
$197.00
540-46 STAHLWILLE 540-46 Crow-foot spanner, 46mm, 3/8" drive. (02200046) Special Order Only!
$232.00
540-50 STAHLWILLE 540-50 Crow-foot spanner, 50mm, 3/8" drive. (02200050) Special Order Only!
$232.00

123
Wrenches - Double Box End - Deep Offset
123
20/8 STAHLWILLE 20/8 Wrench set (96410405), Deep Offset Double Box end, type 20, with metric size 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19 and  20x22mm. Picture 1,   Picture 2,   Picture 3,   Picture 4,   Picture 5. Promotional Price. ONLY one available at this price!
 
Stahlwille 20/8 Deep Offset Double Box End
                      Wrench Set

$234.00
$169.99

(Picture)

20-6x7
STAHLWILLE 20-6x7 Wrench Deep Offset Double Box End, Metric 165mm long. (41040607) $23.00
20-8x9
STAHLWILLE 20-8x9 Wrench Deep Offset Double Box End, Metric 180mm long. (41040809)
$23.00
20-10x11
STAHLWILLE 20-10x11 Wrench Deep Offset Double Box End, Metric 200mm long. (41041011) $25.00
20-12x13
STAHLWILLE 20-12x13 Wrench Deep Offset Double Box End, Metric 220mm long. (41041213) $27.00
20-14x15
STAHLWILLE 20-14x15 Wrench Deep Offset Double Box End, Metric 245mm long. (41041415) $29.00
20-16x17
STAHLWILLE 20-16x17 Wrench Deep Offset Double Box End, Metric 255mm long. (41041617) $32.00
20-18x19
STAHLWILLE 20-18x19 Wrench Deep Offset Double Box End, Metric 275mm long. (41041819) $37.00
20-20x22
STAHLWILLE 20-20x22 Wrench Deep Offset Double Box End, Metric 300mm long. (41042022) $43.00
20-21x23 STAHLWILLE 20-21x23 Wrench Deep Offset Double Box end, Metric 315mm long. (41042123)
$54.00
20-21x24 STAHLWILLE 20-21x24 Wrench Deep Offset Double Box end, Metric 330mm long. (41042124)
$59.00
20-22x24 STAHLWILLE 20-22x24 Wrench Deep Offset Double Box end, Metric 330mm long. (41042224)
$58.00
20-24x27 STAHLWILLE 20-24x27 Wrench Deep Offset Double Box end, Metric 330mm long. (41042427)
$56.00
20-27x30 STAHLWILLE 20-27x30 Wrench Deep Offset Double Box end, Metric 360mm long. (41042730)
$78.00
20-27x32
STAHLWILLE 20-27x32 Wrench Deep Offset Double Box end, Metric 365mm long. (41042730)        Special Order Only
$76.00
20-30x32 STAHLWILLE 20-30x32 Wrench Deep Offset Double Box end, Metric 365mm long. (41043032)
$71.00
20-30x34 STAHLWILLE 20-30x34 Wrench Deep Offset Double Box end, Metric 365mm long. (41043034)
$84.00
20-36x41 STAHLWILLE 20-36x41 Wrench Deep Offset Double Box end, Metric 440mm long. (41043641)
$161.00
20-46x50 STAHLWILLE 20-46x50 Wrench Deep Offset Double Box end, Metric 535mm long. (41044650)
$285.00



Wrenches - Double Box End -  Flat
21/7 STAHLWILLE 21/7 Metric Flat Box End Wrench Set of 7. Includes sizes: 8x9, 10x11, 12x13, 14x15, 16x17, 18x19 and 20x22mm. Weighs 397g. (96410503) SALE!

Stahlwille 21/7 Metric Flat Box End Wrench
                        Set     

SALE!
$212.00
$169.99
(Picture)
21-8x9 STAHLWILLE 21-8x9 Wrench, Flat Box End, 115mm long. (41050809)
$27.00
21-8x10 STAHLWILLE 21-8x10 Wrench, Flat Box End, 115mm long. (41050810)
Stahlwille 21-8x10 Flat Box End Wrench Set    

$25.00
21-10x11 STAHLWILLE 21-10x11 Wrench, Flat Box End, 130mm long. (410501011)
$25.00
21-12x13 STAHLWILLE 21-12x13 Wrench, Flat Box End, 150mm long. (41051213)
$29.00
21-14x15 STAHLWILLE 21-14x15 Wrench, Flat Box End, 165mm long. (41051415)
$31.00
21-16x17 STAHLWILLE 21-16x17 Wrench, Flat Box End, 170mm long. (41051617)
$32.00
21-18x19 STAHLWILLE 21-18x19 Wrench, Flat Box End, 185mm long. (41051819)
$33.00
21-18x21 STAHLWILLE 21-18x21 Wrench, Flat Box End, 185mm long. (41051821)
$46.00
21-19x22 STAHLWILLE 21-19x22 Wrench, Flat Box End, 210mm long. (41051922)
$42.00
21-20x22 STAHLWILLE 21-20x22 Wrench, Flat Box End, 210mm long. (41052022)
$40.00
21-24x27 STAHLWILLE 21-24x27 Wrench, Flat Box End, 290mm long. (41052427)
$50.00
21-27x32 STAHLWILLE 21-27x32 Wrench, Flat Box End, 320mm long. (41052732)
$70.00
21-30x32 STAHLWILLE 21-30x32 Wrench, Flat Box End, 325mm long. (41053032)
$68.00


Wrenches - Double Box End - Shallow Offset -Corona
Stahlwille Type 23 Double Box End Shallow
                    Offset Wrenches

23-6x7 STAHLWILLE 23-6x7 Wrench, Double Box End Corona, Offset, 170mm long. (41070607)

$28.00
23-8x9 STAHLWILLE 23-8x9 Wrench, Double Box End Corona, Offset, 179mm long. (41070809)

$26.00
23-10x11 STAHLWILLE 23-10x11 Wrench, Double Box End Corona, Offset, 188mm long. (41071011)

$28.00
23-12x13 STAHLWILLE 23-12x13 Wrench, Double Box End Corona, Offset, 203mm long. (41071213)

$31.00
23-14x15 STAHLWILLE 23-14x15 Wrench, Double Box End Corona, Offset, 219mm long. (41071415)

$34.00
23-16x17 STAHLWILLE 23-16x17 Wrench, Double Box End Corona, Offset, 248mm long. (41071617)

$37.00
23-18x19 STAHLWILLE 23-18x19 Wrench, Double Box End Corona, Offset, 251mm long. (41071819)

$41.00
23-20x22 STAHLWILLE 23-20x22 Wrench, Double Box End Corona, Offset, 280mm long. (41072022)

$49.00
23/8 STAHLWILLE 23/8 Corona Wrench Set, Double Box End Offset. Includes the following sizes: 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, and 20x22. (96410704)
( Picture 1)    ( Picture 2)    ( Picture 3)    ( Picture 4)  
( Picture 5)    ( Picture 6)    ( Picture 7)


Stahlwille 23/8 Corona Double Box End Wrench
                      Set

$208.00
$245.00
(Picture)



123
Wrenches- Double Open End
123
10/10 STAHLWILLE 10/10 Wrench Set, Thin Double Open End, Metric set of ten.  "MOTOR" wrenches. Included is a sturdy black textile tool roll with velcro fastener. With 3 empty slots if you want to add some other small tools. (96400307)  See individual size details below
  • 6 x7 
  • 8x9 
  • 10x11
  • 12x13
  • 14x15
  • 16x17
  • 18x19
  • 20x22
  • 24x27
  • 30x32


Stahlwille 10/10 Wrench Set       

SALE!
$154.00

$205.00
(Picture)
10-6x7 STAHLWILLE 10-6x7 Wrench, Double Open End, 6x7mm, 3.7mm thick, 120mm long (4-3/4" long). (40030607)
$12.00
10-8x9 STAHLWILLE 10-8x9 Wrench, Double Open End, 8x9mm, 4.0mm thick, 140mm long (5-1/2" long). (40030809)
$13.00
10-10x11 STAHLWILLE 10-10x11 Wrench, Double Open End, 10x11mm, 4.8mm thick, 155mm long (6" long). (40031011)
$13.00
10-10x12
STAHLWILLE 10-10x12 Wrench, Double Open End, 10x12mm, 5.3mm thick, 170mm long (6-1/2" long). (40031012) $17.00
10-12x13 STAHLWILLE 10-12x13 Wrench, Double Open End, 12x13mm, 5.3mm thick, 170mm long (6-1/2" long) . (40031213)
$16.00
10-13x17
STAHLWILLE 10-13x17 Wrench, Double Open End, 13x17mm, 5.8mm thick, 205mm long (8-1/2" long). (40031317)
$20.00
10-14x15 STAHLWILLE 10-14x15 Wrench, Double Open End, 14x15mm wrench, 5.3mm thick, 190mm long (7-1/4" long) . (40031415)
$17.00
10-16x17 STAHLWILLE 10-16x17 Wrench, Double Open End, 16x17mm, 5.8mm thick, 205mm long (8" long) . (40031617)
$18.00
10-18x19 STAHLWILLE 10-18x19 Wrench, Double Open End, 18x19mm, 6.7mm thick, 220mm long (8-1/2" long) . (40031819)
$22.00
10-20x22 STAHLWILLE 10-20x22 Wrench, Double Open End, 20x22mm wrench, 7.3mm thick, 235mm long (9-1/4" long). (40032022)
$25.00
10-24x26 STAHLWILLE 10-24x26 Wrench, Double Open End, 24x26mm wrench, 8.3mm thick, 270mm long (10-1/2" long). (40032426)
$35.00
10-24x27 STAHLWILLE 10-24x27 Wrench, Double Open End, 24x27nn wrench, 8.3mm thick, 280mm long (11" long). (40032427)
Stahlwille 10-24x27 Double Open End Wrench

$33.00
(Picture)
10-30x32 STAHLWILLE 10-30x32 Wrench, Double Open End, 30x32mm, 9.4mm thick, 300mm long (11-3/4" long) . (40033032)
Stahlwille 10-30x32 Double Open End Wrench

$47.00
10-32x36 STAHLWILLE 10-32x36 Wrench, Double open end, 32x36mm, 10mm thick, 325mm in length (12" long). (40033236)
$84.00
10-36x41 STAHLWILLE 10-36x41 Wrench, Double open end, 36x41mm, 11mm thick, 375mm in length (14" long). (40033641)
$112.00
10-41x46 STAHLWILLE 10-41x46 Wrench, Double open end, 41x46mm, 12mm thick, 425mm in length (16" long). (40034146)
$148.00

123
Wrenches- Electric
Lilo D.


12A-3/8 STAHLWILLE 12A-3/8 Wrench, Electric, Very Thin Double Open End. 3/8", 3mm thickness. (40462424)

$21.00
(Picture)
12A-1/2 STAHLWILLE 12A-1/2 Wrench, Electric, Very Thin Double Open End. 1/2", 3mm thickness. See Picture above. (40463232)
$25.00
12A-9/16 STAHLWILLE 12A-9/16 Wrench, Electric, Very Thin Double Open End. 9/16", 3 mm thickness. See Picture above. (40463434)
$28.00
12 STAHLWILLE 12 Wrench, Electric, Very Thin Double Open End. Metric sizes. 2 - 3mm thickness. Special Order. Available Sets: [STAHLWILLE 12/10Pc thin wrench set with size 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11mm]--[STAHLWILLE 12/15Pc thin wrench set with size 3.2, 3.5, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm]  SEE All Sizes Available - click here.
 Price on Request
(Picture)
12-7 STAHLWILLE 12-7 Wrench, Electric, Very Thin Double Open End. 7mm, Measures 91mm long. (40060707)
$19.00

123

Wrenches- Flare Nut
123

Stahlwille Type 24 Flare Nut Wrenches

24-8x10 STAHLWILLE 24-8x10 Wrench, Flare Nut, type 24, size 8x10mm, 145mm long, 6-Point. (41080810)
$39.00
24-9x11 STAHLWILLE 24-9x11 Wrench, Flare Nut, type 24, size 9x11mm, 155mm long, 6-Point. (41080911)
$44.00
24-10x11 STAHLWILLE 24-10x11 Wrench, Flare Nut, type 24, size 10x11mm, 155mm long, 6-Point. (41081011)
$41.00
24-10x12 STAHLWILLE 24-10x12 Wrench, Flare Nut, type 24, size 10x12mm, 155mm long, 6-Point. (41081012)
$43.00
(Picture)

24-11x13 STAHLWILLE 24-11x13 Wrench, Flare Nut, type 24, size 11x13mm, 170mm long, 6-Point. (41081113)
$42.00
(Picture)
24-12x14 STAHLWILLE 24-12x14 Wrench, Flare Nut, type 24, size 12x14mm, 180mm long, 6-Point. (41081214)
$44.00
(Picture)
24-14x17 STAHLWILLE 24-14x17 Wrench, Flare Nut, type 24, size 14x17mm, 200mm long, 12-Point from size 14x17 and up.. (41081417)
$47.00
24-17x19 STAHLWILLE 24-17x19 Wrench, Flare Nut, type 24, size 17x19mm, 220mm long, 12-Point. (41081719)

$52.00
(Picture)

24-18x21 STAHLWILLE 24-18x21 Wrench, Flare Nut, type 24, size 18x21mm. 230mm long *No longer available.
$57.65
24-19x22 STAHLWILLE 24-19x22 Wrench, Flare Nut, type 24, size 19x22mm. 230mm long, 12-Point. (41081922)

$64.00
24-22x24 STAHLWILLE 24-22x24 Wrench, Flare Nut, type 24, size 22x24mm. 245mm long, 12-Point. (41082224)
$71.00
24-24x27 STAHLWILLE 24-24x27 Wrench, Flare Nut, type 24, size 24x27mm. 270mm long, 12-Point. (41082427)
$86.00
24-27x36 STAHLWILLE 24-27x36 Wrench, Flare Nut, type 24, size 27x36mm. 300mm long, 12-Point. (41082736)
$106.00
24-30x32 STAHLWILLE 24-30x32 Wrench, Flare Nut, type 24, size 30x32mm. 300mm long, 12-Point. (41083032)
$114.00
24/4 STAHLWILLE 24/4 Set of 4 Flare Nut wrenches, Type 24. Includes: 8x10, 9x11, 11x13, 12x14. These are double ended 6 point open ring angled wrenches. Made of strong German Chrome Alloy Steel and chrome plated. You need this type of  wrench to prevent rounding off the corners on brake lines,  etc. These are precision German tools with a tight fit, to prevent slipping.
Stahlwille 24/4 Set of 4 Flare Nut
                        Wrenches   
$169.00
$144.00
(Picture)




2222222222
Wrenches- Heavy Duty - Ring Spanner

5
Type 5 Heavy Duty Ring Spanners (Code: 4202). Offset. Available Size 24mm to 100mm. Tubular handle available as an option.
 Stahlwille Type 5 Heavy Duty Ring Spanners
More
Information




L.B.D.
Wrenches- Hex Key
Louis Poo

Stahlwille 10765 Hex Key Wrenches

10765-1.5
STAHLWILLE 10765-1.5 Wrench, Hex Key, Metric, 1.5mm, bright nickel, extra long. 90mm in length. (43213015)
$3.00
10765-2
STAHLWILLE 10765/2 Wrench, Hex Key, Metric, 2mm, bright nickel, extra long. 100mm in length. (43213002)
$3.00
10765-2.5
STAHLWILLE 10765-2.5 Wrench, Hex Key, Metric, 2.5mm, bright nickel, extra long. 112mm in length. (43213025)
$4.00
10765-3
STAHLWILLE 10765-3 Wrench, Hex Key, Metric, 3mm, bright nickel, extra long. 126mm in length. (43213003)
$4.00
10765-4
STAHLWILLE 10765-4 Wrench, Hex Key, Metric, 4mm, bright nickel, extra long. 140mm in length. (43213004)
$5.00
10765-5
STAHLWILLE 10765-5 Wrench, Hex Key, Metric, 5mm, bright nickel, extra long. 160mm in length. (43213005)
$5.00
10765-6
STAHLWILLE 10765-6 Wrench, Hex Key, Metric, 6mm, bright nickel, extra long. 180mm in length. (43216006)
$6.00
10765-7 STAHLWILLE 10765-7 Wrench, Hex Key, Metric, 7mm, bright nickel, for VW/Audi Strut repair. 190mm in length. (43213007)
$9.00
(Picture)
10765-8
STAHLWILLE 10765-8 Wrench, Hex Key, Metric, 8mm, bright nickel, extra long. 200mm in length. (43213008)
$11.00
10765-10
STAHLWILLE 10765-10 Wrench, Hex Key, Metric, 10mm, bright nickel, extra long. 224mm in length. (43213010)
$16.00
10765-12 STAHLWILLE 10765-12 Wrench, Hex Key, Metric, 12mm, bright nickel, extra long. 250mm in length. (43213012)
$21.00
10765-14 STAHLWILLE 10765-14 Wrench, Hex Key, Metric, 14mm, bright nickel, extra long. 280mm in length. (43213014)
$31.00
10765/9 STAHLWILLE 10765/9 Wrench, Hex Key, Metric, Set of 9, bright nickel, extra long in holder. Includes sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10mm. (96432100)


$36.00
(Picture)

Wrenches- Hex Key - Ball End

10767/9 STAHLWILLE 10767/9 Wrench Metric Hex Key with ball end. Set of 9 gunmetal finish in holder. Includes sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm. (96432601)

$72.00
(Picture)

Wrenches- L  Key - Torx

10766/9 STAHLWILLE 10766/9 Wrench, Hex Key, Set T8-T40, L-Type Torx. (96432202) 
$70.00





Wrenches-Single Open End

4004-24 STAHLWILLE 4004-24 Single-end spanner, 24mm, DIN 894, steel, grey finish, 215mm in length, 147g, 8.9mm thick. (40040240)
Stahlwille 4004-24 Single-end Spanner Wrench
$18.00
4004-27
STAHLWILLE 4004-27 Single-end spanner, 27mm, DIN 894, steel, grey finish, 238mm in length, 193g, 9.8mm thick. (40040270)
$21.00
4004-30
STAHLWILLE 4004-30 Single-end spanner, 30mm, DIN 894, steel, grey finish, 261mm in length, 268g, 10.8mm thick. (40040300)
Stahlwille Germany 30mm Open End Wrench
$24.00
(Picture)

4004-32
STAHLWILLE 4004-32 Single-end spanner, 32mm, DIN 894, steel, grey finish, 273mm in length, 315g, 11.8mm thick. (40040320)

STAHLWILLE DIN 894 Wrench 32mm
$28.00
(Picture)

4004-36
STAHLWILLE 4004-36 Single-end spanner, 36mm, DIN 894, steel, grey finish, 300mm in length, 421g, 12.8mm thick. (40040360)
$38.00
4004-41
STAHLWILLE 4004-41 Single-end spanner, 41mm, DIN 894, steel, grey finish, 335mm in length, 555g, 12.8mm thick. (40040410)
$49.00
(Picture)

4004-46
STAHLWILLE 4004-46 Single-end spanner, 46mm,  DIN 894, steel, grey finish, 369mm in length, 806g, 14.8mm thick. (40040460) $61.00
4004-50 STAHLWILLE 4004-50 Single-end spanner, 50mm,  DIN 894, steel, grey finish, 412mm in length, 1003g, 17mm thick. (40040500) $78.00
4004-55 STAHLWILLE 4004-55 Single-end spanner, 55mm, DIN 894, steel, grey finish, 457mm in length, 1267g, 18mm thick. (40040550) $84.00
4004-60 STAHLWILLE 4004-60 Single-end spanner, 60mm, DIN 894, steel, grey finish, 492mm in length, 1650g, 18mm thick. (40040600) $107.00
4004-65 STAHLWILLE 4004-65 Single-end spanner, 65mm, DIN 894, steel, grey finish, 528mm in length, 2012g, 19mm thick. (40040650) $136.00
4004-70 STAHLWILLE 4004-70 Single-end spanner, 70mm, DIN 894, steel, grey finish, 572mm in length, 2425g, 20mm thick. (40040700) $158.00
4004-75 STAHLWILLE 4004-75 Single-end spanner, 75mm, DIN 894, steel, grey finish, 608mm in length, 2758g, 21mm thick. (40040750) $200.00
4004-80 STAHLWILLE 4004-80 Single-end spanner, 80mm, DIN 894, steel, grey finish, 645mm in length, 2963g, 22mm thick. (40040800) $243.00
4004-85 STAHLWILLE 4004-85 Single-end spanner, 85mm, DIN 894, steel, grey finish, 690mm in length, 3717g, 23mm thick. (40040850) $316.00
4004-90 STAHLWILLE 4004-90 Single-end spanner, 90mm, DIN 894, steel, grey finish, 690mm in length, 3570g, 23mm thick. (40040900) $364.00
4004-95 STAHLWILLE 4004-95 Single-end spanner, 95mm, DIN 894, steel, grey finish, 847mm in length, 5943g, 25mm thick. (40040950) $516.00
4004-100 STAHLWILLE 4004-100 Single-end spanner, 100mm, DIN 894, steel, grey finish, 847mm in length, 5800g, 25mm thick. (40041000) $538.00
4004-105 STAHLWILLE 4004-105 Single-end spanner, 105mm, DIN 894, steel, grey finish, 1000mm in length, 8400g, 28mm thick. (40041050). No Longer Available
$688.14
4004-110 STAHLWILLE 4004-110 Single-end spanner, 110mm, DIN 894, steel, grey finish, 1000mm in length, 8370g, 28mm thick. (40041100). No Longer Available
$742.69
4004-115 STAHLWILLE 4004-115 Single-end spanner, 115mm, DIN 894, steel, grey finish, 1000mm in length, 12000g, 28mm thick. (40041150). No Longer Available
$845.49
4004-120 STAHLWILLE 4004-120 Single-end spanner, 120mm, DIN 894, steel, grey finish, 1000mm in length, 17000g, 28mm thick. (40041200). No Longer Available
$935.71
4004-125 STAHLWILLE 4004-125 Single-end spanner, 125mm, DIN 894, steel, grey finish, 1000mm in length, 18500g, 28mm thick. (40041250). No Longer Available
$1,130.82
4004-130 STAHLWILLE 4004-130 Single-end spanner, 130mm, DIN 894, steel, grey finish, 1000mm in length, 19000g, 28mm thick. (40041300). No Longer Available
$1,164.39
4004-135 STAHLWILLE 4004-135 Single-end spanner, 135mm, DIN 894, steel, grey finish, 1000mm in length, 19390g, 28mm thick. (40041350). No Longer Available
$1,311.25

123
Wrenches- Obstruction
Jesse
27-10x12 STAHLWILLE 27-10x12 Wrench, Obstruction-half moon Metric, 10x12mm. (41091012)
$53.00
27-11x13 STAHLWILLE 27-11x13 Wrench, Obstruction-half moon Metric, 11x13mm. (41091113)

$50.00
27-14X16
STAHLWILLE 27-14x16 Wrench, Obstruction-half moon Metric, 14x16mm. (41091416) $64.00
27-14x17 STAHLWILLE 27-14x17 Wrench, Obstruction-half moon Metric, 14x17mm. (41091417)
Stahlwille 27-14x17 Half Moon Obstruction
                      Wrench

$63.00
27-15x17
STAHLWILLE 27-15x17 Wrench, Obstruction-half moon Metric, 15x17mm. (41091517)

Stahlwille 27-15x17 Half Moon Obstruction
                      Wrench
$63.00
27-16x18
STAHLWILLE 27-16x18 Wrench, Obstruction-half moon Metric, 16x18mm. (41091618)

Stahlwille 27-16x18Half Moon Obstruction
                      Wrench
$76.00
27-19x22 STAHLWILLE 27-19x22 Wrench, Obstruction-half moon Metric, 19x22mm. (41091922)
Stahlwille 27-19x22 Half Moon Obstruction
                      Wrench


 $80.00





Wrench - Pipe

6558
Pipe Wrench Type 6558. Available in Size 10", 12", 14", 18"24" inch. US-Standard GGG-W-651 Type II category A.


Price on
Request




Wrenches - Ratcheting Combination

xxxxxxx
STAHLWILLE 17 Ratchet Wrench

STAHLWILLE Combination Ratcheting Spanner. Open- Ratchet. Reversible, 72 Teeth for work in confined spaces. Tight ratchet angle of 5º, ring end offset by 15º degrees. Chrome Alloy Steel. Chrome Plated.


17-8 Type 17-8, 144mm long. Code 41170808
$40.00
17-9
Type 17-9, 150mm long. Code 41170909
$42.00
17-10
Type 17-10, 158mm long. Code 41171010
$43.00
17-11
Type 17-11, 165mm long, Code 41171111
$47.00
17-12
Type 17-12, 173mm long, Code 41171212
$49.00
17-13
Type 17-13, 182mm long. Code 41171313
$49.00
17-14
Type 17-14, 190mm long, Code 41171414
$52.00
17-15
Type 17-15, 202mm long, Code 41171515
$56.00
17-16
Type 17-16, 215mm long, Code 41171616
$59.00
17-17
Type 17-17, 229mm long, Code 41171717
$60.00
17-18
Type 17-18, 240mm long, Code 41171818
$66.00
17-19
Type 17-19, 252mm long, Code 41171919
$68.00
 

17/12
Type 17 wrench set. Includes roll-up wallet. Complete with sizes 8,9,10,11,12,13,14,15,16,17,18,19. Code (96411712)

$597.00



123

Wrenches- Slugging-Box End- Heavy Duty
Lilo
8 STAHLWILLE 8 Wrench Striking Face, Slugging, or Slogging. Whatever you choose to call it, STAHLWILLE has the wrench to do the work. The type 8 is available in size 32-120mm, special order.
Stahlwille Tyoe 8 Heavy Duty Box End Striking
                      Face Wrench
More Information
8 32
Stahwille 8 32 Heavy Duty Slugging Wrench, 32mm, overall length 195mm. Code: 42010032
Price on
Request
8 36
Stahwille 8 36 Heavy Duty Slugging Wrench, 36mm, overall length 195mm. Code: 42010036 Price on
Request
8 41
Stahwille 8 41 Heavy Duty Slugging Wrench, 41mm, overall length 200mm. Code: 42010041 Price on
Request
8 46
Stahwille 8 46 Heavy Duty Slugging Wrench, 46mm, overall length 250mm. Code: 42010046 Price on
Request
8 50
Stahwille 8 50 Heavy Duty Slugging Wrench, 50mm, overall length 280mm. Code: 42010050 Price on
Request
8 55
Stahwille 8 55 Heavy Duty Slugging Wrench, 55mm, overall length 300mm. Code: 42010055 Price on
Request
8 60
Stahwille 8 60 Heavy Duty Slugging Wrench, 60mm, overall length 300mm. Code: 42010060 Price on
Request
8 65
Stahwille 8 65 Heavy Duty Slugging Wrench, 65mm, overall length 325mm. Code: 42010065 Price on
Request
8 70
Stahwille 8 70 Heavy Duty Slugging Wrench, 70mm, overall length 355mm. Code: 42010070 Price on
Request
8 75
Stahwille 8 75 Heavy Duty Slugging Wrench, 75mm, overall length 360mm. Code: 42010075 Price on
Request
8 80
Stahwille 8 80 Heavy Duty Slugging Wrench, 80mm, overall length 440mm. Code: 42010080 Price on
Request
8 85
Stahwille 8 85 Heavy Duty Slugging Wrench, 85mm, overall length 440mm. Code: 42010085 Price on
Request
8 90
Stahwille 8 90 Heavy Duty Slugging Wrench, 90mm, overall length 445mm. Code: 42010090 Price on
Request
8 95
Stahwille 8 95 Heavy Duty Slugging Wrench, 95mm, overall length 450mm. Code: 42010095 Price on
Request
8 100
Stahwille 8 100 Heavy Duty Slugging Wrench, 100mm, overall length 455mm. Code: 42010100 Price on
Request
8 105
Stahwille 8 105 Heavy Duty Slugging Wrench, 105mm, overall length 460mm. Code: 42010105 Price on
Request
8 110
Stahwille 8 110 Heavy Duty Slugging Wrench, 110mm, overall length 500mm. Code: 42010110 Price on
Request
8 115
Stahwille 8 115 Heavy Duty Slugging Wrench, 115mm, overall length 505mm. Code: 42010115 Price on
Request
8 120
Stahwille 8 120 Heavy Duty Slugging Wrench, 120mm, overall length 510mm. Code: 42010120 Price on
Request




*********
Wrenches- Slugging-Open End

4204-27
STAHLWILLE 4204 27mm Striking face open ended spanner. DIN 133. The spanner is made of special tool steel in a grey finish. 27mm opening, 180mm in length. 321g. (42040027)
Stahlwille 4204-27 Striking Face Open Ended
                      Spanner
$57.00



4204-30
STAHLWILLE 4204 30mm Striking face open ended spanner. DIN 133. The spanner is made of special tool steel in a grey finish. 30mm opening, 190mm in length. 451g. (42040030) $60.00
4204-32
STAHLWILLE 4204 32mm Striking face open ended spanner. DIN 133. The spanner is made of special tool steel in a grey finish. 32mm opening, 190mm in length. 424g. (42040032) $64.00
4204-36
STAHLWILLE 4204 36mm Striking face open ended spanner. DIN 133. The spanner is made of special tool steel in a grey finish. 36mm opening, 215mm in length. 698g. (42040036) $77.00
4204-41
STAHLWILLE 4204 41mm Striking face open ended spanner. DIN 133. The spanner is made of special tool steel in a grey finish. 41mm opening, 235mm in length. 923g. (42040041) $99.00
4204-46
STAHLWILLE 4204 46mm Striking face open ended spanner. DIN 133. The spanner is made of special tool steel in a grey finish. 46mm opening, 255mm in length. 1245g. (42040046) $132.00
4204-50 STAHLWILLE 4204 50mm Striking face open ended spanner. DIN 133. The spanner is made of special tool steel in a grey finish. 50mm opening, 275mm in length. 1445g. (42040050) $146.00
4204-55
STAHLWILLE 4204 55mm Striking face open ended spanner. DIN 133. The spanner is made of special tool steel in a grey finish. 55mm opening, 300mm in length. 2057g. (42040055) $180.00
4204-60
STAHLWILLE 4204 60mm Striking face open ended spanner. DIN 133. The spanner is made of special tool steel in a grey finish. 60mm opening, 320mm in length. 2559g. (42040060) $187.00
4204-65 STAHLWILLE 4204 65mm Striking face open ended spanner. DIN 133. The spanner is made of special tool steel in a grey finish. 65mm opening, 342mm in length. 3285g. (42040065) $247.00
4204-70
STAHLWILLE 4204 70mm Striking face open ended spanner. DIN 133. The spanner is made of special tool steel in a grey finish. 70mm opening, 375mm in length. 4573g. (42040070) $307.00
4204-75
STAHLWILLE 4204 75mm Striking face open ended spanner. DIN 133. The spanner is made of special tool steel in a grey finish. 75mm opening, 375mm in length. 4163g. (42040075) $366.00
4204-80
STAHLWILLE 4204 80mm Striking face open ended spanner. DIN 133. The spanner is made of special tool steel in a grey finish. 80mm opening, 408mm in length. 6059g. (42040080) $428.00


Wrench-Slugging-Box End


Stahlwille 4205 Striking Face
                  Ring Spanners

4205-41
STAHLWILLE 4205 41mm Striking face ring spanner. DIN 7444. The spanner is made of special steel grey. 41mm opening and 225mm in length. 715g. (42050041) $158.00
4205-42
STAHLWILLE 4205 42mm Striking face ring spanner. DIN 7444. The spanner is made of special steel grey. 42mm opening and 225mm in length. 700g. (42050042) $173.00
4205-46
STAHLWILLE 4205 46mm Striking face ring spanner. DIN 7444. The spanner is made of special steel grey. 46mm opening and 240mm in length. 915g. (42050046) $166.00
4205-50
STAHLWILLE 4205 50mm Striking face ring spanner. DIN 7444. The spanner is made of special steel grey. 50mm opening and 250mm in length. 1120g. (42050050) $191.00
4205-52
STAHLWILLE 4205 52mm Striking face ring spanner. DIN 7444. The spanner is made of special steel grey. 52mm opening and 250mm in length. 1100g. (42050052). No Longer Available.
$181.48
4205-55
STAHLWILLE 4205 55mm Striking face ring spanner. DIN 7444. The spanner is made of special steel grey. 55mm opening and 270mm in length. 1375g. (42050055).
$216.00
4205-56
STAHLWILLE 4205 56mm Striking face ring spanner. DIN 7444. The spanner is made of special steel grey. 56mm opening and 270mm in length. 1400g. (42050056). No Longer Available
$228.68
4205-60
STAHLWILLE 4205 60mm Striking face ring spanner. DIN 7444. The spanner is made of special steel grey. 60mm opening and 270mm in length. 1565g. (42050060) $232.00
4205-65
STAHLWILLE 4205 65mm Striking face ring spanner. DIN 7444. The spanner is made of special steel grey. 65mm opening and 290mm in length. 2045g. (42050065) $298.00
4205-70
STAHLWILLE 4205 70mm Striking face ring spanner. DIN 7444. The spanner is made of special steel grey. 70mm opening and 320mm in length. 3000g. (42050070) $335.00
4205-75
STAHLWILLE 4205 75mm Striking face ring spanner. DIN 7444. The spanner is made of special steel grey. 75mm opening and 325mm in length. 2750g. (42050075) $355.00
4205-80
STAHLWILLE 4205 80mm Striking face ring spanner. DIN 7444. The spanner is made of special steel grey. 80mm opening and 345mm in length. 4100g. (42050080) $529.00
.




*******
Wrenches- Torque
Meg
447 STAHLWILLE 447 Special Adapter. Available Metric size 7, 8, 9, 10, 13 and American sizes: SAE AS 954-E, high proformance steel with gun finish. 
Stahlwille 447 Special Adapter, Torque
                      Wrenches

447-7
STAHLWILLE 447-7 Box End Adapter 7mm.  3/8 Dr (2181007)
$71.00
447-8
STAHLWILLE 447-8  Box End Adapter 8mm. 3/8 Dr (2181008) $71.00
447-9
STAHLWILLE 447-9  Box End Adapter  9mm. 3/8 Dr (2181009) $96.00
447-10
STAHLWILLE 447-10 Box End Adapter 10mm. 3/8 Dr (2181010) $73.00
447-13
STAHLWILLE 447-13 Box End Adapter 13mm. 3/8 Dr (2181013) $78.00
447A-1/4
STAHLWILLE 447A-1/4 SAE Box End Adapter. (2470016) $72.00
447A-5/16
STAHLWILLE 447A-5/16 SAE Box End Adapter. (2470020) $71.00
447A-3/8
STAHLWILLE 447A-3/8 SAE Box End Adapter. (2470024) $71.00
447A-7/16
STAHLWILLE 447A-7/16 SAE Box End Adapter. (2470028)  $72.00
447A-1/2
STAHLWILLE 447A-1/2 SAE Box End Adapter. (2470032)  $72.00
447A-9/16
STAHLWILLE 447A-9/16 SAE Box End Adapter. (2470034)  $78.00
447A-5/8
STAHLWILLE 447A-5/8 SAE Box End Adapter. (2470036)  $78.00
447aSP-7
STAHLWILLE 447aSP-7 Spline-Drive Adapter, size 7/32". (2480014) $102.00
447aSP-8
STAHLWILLE 447aSP-8 Spline-Drive Adapter, size 1/4". (2480016) $102.00
447aSP-9
STAHLWILLE 447aSP-9 Spline-Drive Adapter, size 9/32". (2480018) $102.00
447aSP-10
STAHLWILLE 447aSP-10 Spline-Drive Adapter, size 5/16". (2480020) $102.00
447aSP-12
STAHLWILLE 447aSP-12 Spline-Drive Adapter, size 3/8". (2480024) $102.00
447aSP-14
STAHLWILLE 447aSP-14 Spline-Drive Adapter, size 7/16". (2480028) $104.00
447aSP-16
STAHLWILLE 447aSP-16 Spline-Drive Adapter, size 1/2". (2480032) $107.00
447aSP-18
STAHLWILLE 447aSP-18 Spline-Drive Adapter, size 9/16". (2480034) $107.00
447aSP-20 STAHLWILLE 447aSP-20 Spline-Drive Adapter, size 5/8". (2480036) $110.00


Torque Wrench Type 721

Stahlwille 721Nf Torque Wrenches with Ratchet

721NF/80
STAHLWILLE 721NF/80 Torque Wrench 160-800Nm, Code 50200081
$2,871.00
721NF/100
STAHLWILLE 721NF/100 Torque Wrench 200-1000Nm Code 96502001
$3,296.00
721/5 Quick
STAHLWILLE 721/5 Quick Torque Wrench 6-50Nm, 5-36 ft-lb. With 3/8" ratchet head. Code 50204005
$730.00
721/15 Quick
STAHLWILLE 721/15 Quick Torque Wrench 30-150Nm, 25-110 ft-lb. With 1/2" ratchet head.
Code 50204015
$734.00
721/20 Quick
STAHLWILLE 721/20 Quick Torque Wrench 40-200Nm, 30-150 ft-lb. With 1/2" ratchet head.
Code 50204020
$789.00
721/30 Quick
STAHLWILLE 721/30 Quick Torque Wrench 60-300Nm, 50-220 ft-lb. With 1/2" ratchet head.
Code 50204030
$908.00
721QR/15 STAHLWILLE 721QR/15 Torque Wrench 30-150Nm, 25-110 ft-lb. With 1/2 quick release ratchet head.
Code 50204115
$743.00
721QR/20 STAHLWILLE 721QR/20 Torque Wrench 40-200Nm, 30-150 ft-lb. With 1/2 quick release ratchet head.
Code 50204120
Stahlwille 721QR/20 Torque Wrench with Quick
                      Release Ratchet Head
$798.00
725/4 STAHLWILLE 725/4 Ratchet insert, 1/4" drive with 9x12 mounting. Reversible, 22 teeth. 62g. Maximum continuous load limited to 40Nm on this insert. For torque wrenches 730/4, 730/5 and 730/10. Code 58254004
Stahlwille 725/4 Ratchet Insert
$164.00
(Picture)
725QR-4 STAHLWILLE 725QR-4 Ratchet insert, 1/4" drive with 9x12 mounting. Reversible with quick release button, 22 teeth. 60g. Maximum continuous load limited to 40Nm on this insert. For torque wrenches 730/4, 730/5 and 730/10, etc.. Caution: modified setting on torque wrench needed. Code 58253004
Stahlwille 725QR-4 Ratchet Insert

$210.00


Torque Wrench Type 730

730 QUICK
Torque Wrench

Stahlwille 730/4 Torque Wrench with Rapid
                    Adjustment
730a/5
Quick
STAHLWILLE 730a/5 Torque Wrench, Rapid Adjustment 6-50Nm or 50-440 In.Lbs., 9x12 insert opening. Sliding scale. Length 315mm, 805g.  Code 50584005 $604.00
730a/10
Quick
STAHLWILLE 730a/10 Torque Wrench, Rapid Adjustment 20-100Nm or 180-880 In.Lbs., 9x12 insert opening. Sliding scale. Length 370mm, 934g.  Code 50584010 $639.00
730a/12
Quick
STAHLWILLE 730a/12 Torque Wrench, Rapid Adjustment 25-130Nm or 225-1150 In.Lbs., 14x18 insert opening. Sliding scale. Length 410mm, 1076g.  Code 50584012 $694.00
730a/20
Quick
STAHLWILLE 730a/20 Torque Wrench, Rapid Adjustment 40-200Nm or 350-1750 In.Lbs., 14x18 insert opening. Sliding scale. Length 455mm, 1216g.  Code 50584020 $716.00
730/5 QUICK  STAHLWILLE 730/5 Torque Wrench, Rapid Adjustment 6-50Nm or 5-36 Ft.Lbs., 9x12 insert opening. Sliding scale. Length 315mm, 805g.  Code 50184005

$593.00
(Picture)
730/10 QUICK
STAHLWILLE 730/10 Torque Wrench, Rapid Adjustment 20-100Nm or 15-72.5 Ft.Lbs., 9x12 insert opening. Sliding scale. Length 370mm, 1020g. Code 50184010
$628.00
730/12 QUICK
STAHLWILLE 730/12 Torque Wrench, Rapid Adjustment 25-130Nm or 20-95 Ft.Lbs., 14x18 insert opening. Sliding scale. Length 410mm, 1100g. Code 50184012
$650.00
730/20 QUICK
STAHLWILLE 730/20 Torque Wrench, Rapid Adjustment 40-200Nm or 30-145 Ft.Lbs., 14x18 insert opening. Sliding scale. Length 455mm, 1250g. Code 50184020
$716.00
730/40 QUICK
STAHLWILLE 730/40 Torque Wrench, Rapid Adjustment 80-400Nm or 60-300 Ft.Lbs., 14x18 insert opening. Sliding scale. Length 590mm, 1655g. Code 50184040
$1,042.00
730/80 STAHLWILLE 730/80 Torque Wrench. Order Code: (50180080) Special Order. Basic wrench with tool carrier for shell tools. Shell size 24.5x28mm. Range 160-800Nm or 120-600ft.lb.  Knob adjustment on the end.  Length 970mm, weight 5377g. See Ring Shell tool part 732a/80-15/16" and 732a/80-1-1/16" for Jet Engine Pins of Airbus A320/A321. (not included) Code 50180080
Stahlwille 730/80 Torque Wrench

$2,223.00
730/65
QUICK 
STAHLWILLE 730/65 Torque Wrench, Rapid Adjustment 130-650Nm or 100-480 Ft.Lbs., 14x18 insert opening. Sliding scale. Length 875mm, 3480g. Code 50184065
$1,574.00
730/2
Quick
STAHLWILLE 730/2 Torque Wrench, Rapid Adjustment 4-20Nm, 9x12 insert opening. Sliding scale. Length 179mm, 315g.  Code 50184002 $582.00
730/4
Quick
STAHLWILLE 730/4 Torque Wrench, Rapid Adjustment 8-40Nm, 9x12 insert opening. Sliding scale. Length 223mm, 395g.  Code 50184004 $593.00
730a/2-1
Quick
STAHLWILLE 730a/2-1 Torque Wrench, Rapid Adjustment 17.5-87.5 In.Lbs, 9x12 insert opening. Sliding scale. Length 179mm, 315g.  Code 50584001 $672.00
730a/2
Quick
STAHLWILLE 730a/2 Torque Wrench, Rapid Adjustment 30-175 In.Lbs, 9x12 insert opening. Sliding scale. Length 179mm, 315g.  Code 50584002 $672.00
730a/4
Quick
STAHLWILLE 730a/4 Torque Wrench, Rapid Adjustment 70-350 In.Lbs, 9x12 insert opening. Sliding scale. Length 223mm, 395g.  Code 50584004 $604.00
Old Type
730
STAHLWILLE 730  with Sliding scale  OLD Style. No Longer Available. See new QUICK type above.
(Overview)
More
Info


Torque Wrenches Type 730D

730D Currently unavailable.
.



Torque Wrenches Type 730N


Stahlwille 730N Torque Wrenches, square drives with QuickRelease. Has easy-to-read scales which are color coded for N m and ft.lb scales (Ft.lbs and In.Lbs on 730Na models). Guaranteed maximum accuracy deviation of plus/minus 3%. Rapid-action setting and ergonomic handle.


730Na/5
Stahlwille 730Na/5 Torque Wrench, Rapid Adjustment 7-37 Ft.Lbs or 90-450 In.Lbs. 9x12 insert opening. Twin Scales. Length 330mm, 825g. Code: 50581005
Price on
Request
730Na/10 Stahlwille 730Na/10 Torque Wrench, Rapid Adjustment 15-75 Ft.Lbs or 180-900 In.Lbs. 9x12 insert opening. Twin Scales. Length 386mm, 980g. Code: 50581010 Price on
Request
730Na/20 Stahlwille 730Na/20 Torque Wrench, Rapid Adjustment 30-150 Ft.Lbs or 350-1800 In.Lbs. 14x18 insert opening. Twin Scales. Length 467mm, 1260g. Code: 50581020 Price on
Request
730Na/40 Stahlwille 730Na/40 Torque Wrench, Rapid Adjustment 60-300 Ft.Lbs or 800-3600 In.Lbs. 14x18 insert opening. Twin Scales. Length 607mm, 1660g. Code: 50581040 Price on
Request
730N/5
Stahlwille 730N/5 Torque Wrench, Rapid Adjustment 10-50Nm or 7-37 Ft.Lbs. 9x12 insert opening. Twin Scales. Length 330mm, 825g. Code: 50181005 Price on
Request
730N/10 Stahlwille 730N/10 Torque Wrench, Rapid Adjustment 20-100Nm or 15-75 Ft.Lbs. 9x12 insert opening. Twin Scales. Length 386mm, 980g. Code: 50181010 Price on
Request
730N/12 Stahlwille 730N/12 Torque Wrench, Rapid Adjustment 25-130Nm or 20-95 Ft.Lbs. 14x18 insert opening. Twin Scales. Length 421mm, 1120g. Code: 50181012 Price on
Request
730N/20 Stahlwille 730N/20 Torque Wrench, Rapid Adjustment 40-200Nm or 30-150 Ft.Lbs. 14x18 insert opening. Twin Scales. Length 467mm, 1260g. Code: 50181020 $822.00
730N/40 Stahlwille 730N/40 Torque Wrench, Rapid Adjustment 80-400Nm or 60-300 Ft.Lbs. 14x18 insert opening. Twin Scales. Length 607mm, 1660g. Code: 50181040 Price on
Request
730N/65 Stahlwille 730N/65 Torque Wrench, Rapid Adjustment 130-650Nm or 100-480 Ft.Lbs. 14x18 insert opening. Twin Scales. Length 890mm, 3300g. Code: 501810065 Price on
Request




Torque Wrench Insert Tools


For a more extensive list of torque wrench inserts, visit the Stahlwille Inserts page here. Please Note: When using inserts whose length is longer than the standard length, you must re-calculate the torque wrench setting display value for the torque wrench in use. For a formula, click here.


1820 Stahlwille 1820 Tool Holder. With 9x12 mounting. 382.5mm long. Code: 18200001 $125.00
1821 Stahlwille 1821 Tool Holder. With 14x18 mounting. 575mm long. Code: 18210001


$161.00
732TX/40-E24 Stahlwille 732TX/40-E24 Torx Insert Tool E24, 14x18 mounting. Code: 58294024.
Stahlwille 732TX/40-E24 TORX Insert Tool
$116.00
735/5 STAHLWILLE 735/5 Ratchet insert, 3/8" drive with 9x12 mounting. Reversible, 60 teeth. 136g. Maximum continuous load limited to 100Nm on this insert. For torque wrenches 730/4, 730/5 and 730/10. (58250005)
$179.00
(Picture)
735/10 STAHLWILLE 735/10 Ratchet insert, 1/2" drive with 9x12 mounting. Reversile, 60 teeth. 147g. Maximum continuous load limited to 100Nm on this insert. For torque wrenches 730/4, 730/5 and 730/10. (58250010)
$186.00
(Picture)
735/20 STAHLWILLE 735/20 Ratchet insert, 1/2" drive with 14x18 mounting. Reversile, 60 teeth. 302g. Maximum continuous load limited to 300Nm on this insert. For torque wrenches 730/20, 730/40 and 730/65. (58250020)
Stahlwille 735/20 Ratchet Insert for Torque
                      Wrenches
$191.00
(Picture)
735/40 STAHLWILLE 735/40 Ratchet insert, 3/4" drive with 14x18 mounting. Reversible, 60 teeth. 515g. Maximum continuous load limited to 400Nm on this insert. For torque wrenches 730/20, 730/40 and 730/65. (58250040)
$285.00
735/40HD STAHLWILLE 735/40HD Ratchet insert, 3/4" drive with 14x18 mounting. Reversible, 60 teeth. 725g. Maximum continuous load limited to 650Nm on this insert. For torque wrenches 730/20, 730/40 and 730/65. (58250065) $322.00
737/10
STAHLWILLE 737/10 Blank end insert tool, (Code: 58270010), 9x12mm. Weld on your own tool. To prevent damage from excessive temperatures, the locking pin, spring and washer are not fitted until the welding work has been completed, instructions are supplied.
Stahlwille 737/10 Blank End Insert Tool
$60.00
737/40 STAHLWILLE 737/40 Blank end insert tool, Code: 58270040, 14x18mm. Weld on your own tool. To prevent damage from excessive temperatures, the locking pin, spring and washer are not fitted until the welding work has been completed, instructions are supplied.
$75.00
(Picture)
7380N STAHLWILLE 7380N Torque Angle Gauge. Heavy Duty Protractor, 360°  with 5° markings,  for tightening of bolts controlled by rotation angle. 1/2" drive, with magnet to hold the pointer stationary. (54010001)
$296.00
(Picture)





Wrenches -  Multipower Torque Mulitpliers


Stahlwille MP300 Multipower Torque Multipliers
Special Order Only!

53030800
MP300-800
STAHLWILLE 53030800 MP300-800 1/2" input, 3/4" output  Multipower Torque Multiplier. Maximum Output 800Nm  590ft.lb, Gear Ratio 4:1, Torque Ratio 1:3.5. 215mm in length
$1,952.00
53031350
MP300-1350
STAHLWILLE 53031350 MP300-1350 3/4" input, 3/4" output  Multipower Torque Multiplier. Maximum Output 1350Nm  996ft.lb., Gear Ratio 4:1, Torque Ratio 1:3.6. 265mm in length
$2,851.00
53032000
MP300-2000
STAHLWILLE 53032000 MP300-2000 1/2" input, 1" output  Multipower Torque Multiplier. Maximum Output 2000Nm  1475ft.lb., Gear Ratio 16:1, Torque Ratio 1:12.5. 330mm in length
$5,951.00
53033000
MP300-3000
STAHLWILLE 53033000 MP300-3000 3/4" input, 1" output  Multipower Torque Multiplier. Maximum Output 3000Nm  2212ft.lb., Gear Ratio 16:1, Torque Ratio 1:12.5. 330mm in length
$7,052.00
53035000
MP300-5000
STAHLWILLE 53035000 MP300-5000 3/4" input, 1-1/2" output  Multipower Torque Multiplier. Maximum Output 5000Nm 3687ft.lb., Gear Ratio 20:1, Torque Ratio 1:17.0. 400mm in length
$10,517.00

123
Wrenches- Torx
123

Stahlwille 21TX Female Torx Wrenches
21TX/4
SET
STAHLWILLE 21TX/4 Female Torx Wrench SET with size E6-E24 flat pattern. (E6xE8) (E10xE12) (E14xE18) (E20xE24). Details are listed below on individual wrenches.

Stahlwille Torx Wrench Set
$167.00
$125.00
(Picture)
21TX-E6xE8 STAHLWILLE 21TX-E6xE8Wrench, Torx, E6 x E8. 115.5mm in length. Flat. (41250608)
$34.00
21TX-E10xE12 STAHLWILLE 21TX-E10xE12 Wrench, Torx, E10 x E12. 149.5mm in length. Flat. (41251012)
$35.00
21TX-E14xE18 STAHLWILLE 21TX-E14xE18 Wrench, Torx, E14 x E18. 185mm in length. Flat. (41251418)
$42.00
21TX-E20xE24 STAHLWILLE 21TX-E20xE24 Wrench, Torx, E20 x E24. 227mm in length. Flat. (41252024)
Stahlwille 21TX-E20xE24 Female Torx Wrench
$56.00
(Picture)



 
.

About STAHLWILLE


Tool Quality Made in Germany

Quality is best for business. This philosophy has long been a tradition at STAHLWILLE. Excellent designs, high-grade materials, precision machining processes and assured quality are the features that our customers in the automotive and aerospace industries in 100 countries around the world have come to appreciate.

Effort in Quality Out

Our handtools are designed on the basis that they are an extension to your hand. Intelligent designs ensure they can deal with considerable loads, guarantee close tolerances, provide easy and safe handling, and a high degree of reliability. Special forging techniques give the already high-grade steel the ideal molecular structure. Our round-finishing process ensures tools are easy to grip and pleasant to grasp. The result: tools with excellent value-for-money ratings.

Skills of the Higest Level

When it comes to maintenance and repair on modern vehicles, it is safety, precision and speed that count most. It is not just the presence of the skilled mechanic but his access to specialist, high-grade tools that makes the difference. In conjunction with leading vehicle manufacturers, we develop complete series of specialist tools for truly professional repair shop use. This is our contribution to worldwide freedom of movement. The off-shore, ship-building and mining industries, engineering for the chemicals and petrochemicals industry, construction machinery engineering and power station construction all require us to think in different dimensions. It is under these conditions that our tools prove their worth time and again as they contribute to safety and ergonomic working practices. In the aerospace industry, safety is of the utmost priority. Our high-grade tools and sets of tools are specifically designed for service work in these critical areas. Take, for example, tools in High Performance Quality that met the strigent demands of European and American aerospace standards. Tools for Hi-Lok bolts or the TCS (Tool Control System) awarded the Aerospace Industry Award.

Respect and a Long-sighted Approach to the Future

Our objective is to organise all aspects of our work from development to materials purchasing, from production to packaging materials in an environmentally aware manner. To a large extent, refuse avoidance and recycling are key aspects. Thanks to state-of-the-art machinery and contemporary developments, the consumption of all forms of energy, whether electricity, compressed air, water or heating, are constantly monitored and regularly optimised by the use of modern processes. Since water plays a special role in any manufacturing processes, waste water treatment plant is standard equipment within the production flow. Our new nickle and chrome recovery plant has only recently started work. A further key factor is recycling. All those different materials that are generated as unavoidable by-products during production are sorted, separated and collected in appropriately marked containers. Continuous training workshops, discussion groups and exchanges of experience among the compaines involved, backed up with public relations efforts both inside and outside the company, contribute to a constant fine-tuning of environmental protection efforts and processes which can then be made available to other companies in the form of a corrective actions list. STAHLWILLE is a signatory to the "Lokale Agenda 21", an ecological agreement between companies that is unique in Northrine-Westfalia. The idea was spawned by the worldwide environmental "Agenda 21", agreed in 1992 in Rio de Janerio.

Our Long Tradition of Success

The nail foundry originally founded by Eduard Wille in 1862 soon developed to become a respected manufacturer of high-grade tools. The attention of STAHLWILLE to quality, diversity of the products offered and specialisation ensured that this family business maintained its steady progress through even the toughest of crises. Today, a consistent customer-driven approach complements the tried-and-tested principles to provide a solid foundation for the future.
Copyright © STAHLWILLE Germany Catalog 91979977

Some people might say Star Willie Tools, but it is Stahlwille Tools.
HOME Quick
Search
SEARCH email
Samstag
How To Order VDE
Tools

Copyright © 1997-2025  Samstag Sales