![]() |
![]() Wuppertal, Germany USA Phone: ☎ (615)-735-3388 |
|
Carl Walter has solutions for your heavy maintenance tool needs. In addition to torque multipliers, they have free wheel ratchets in size up to 85mm. We have some Carl Walter tools in stock and we can special order this brand for you. Please email us for a quote on any Carl Walter tool! |
![]() |
![]() |
![]() |
![]() |
![]() |
HOME | Quick Search | SEARCH | email Samstag | How To Order |
|
Please Note: Our shopping cart is available for your convenience. The shipping is a flat rate calculated by value. Contact us for more shipping options. ( Click for Shipping Rates & Info) | |||
Last
Carl
Walter
Update:
Feb
3, 2025 |
|
|
|
Custom Made to Order |
||
Carl Walter 268074119040 Custom Made |
Carl Walter can
custom make tools for you. Price depends on the
complexity of the tool. And a minimum order could
apply. Delivery could take 8 weeks. For example
this 41mm drive 19mm hex bit torque multiplier insert!
|
Price on Request |
Carl Walter 002580214350 |
Carl Walter
002580214350 Special Custom Made Socket. Extra long
3/4" drive Ball End 14mm Hex Bit. Length 350mm. For
extra hard version specify part 002580214351. |
Price
On Request |
|
|
.1234567 |
|
Carl Walter
160/10MM Set of 10 Electronic double open-end spanner
set that is the same size at both ends, jaws angled
15º and 75º. Extra thin jaws, special tool steel,
chrome plated. Complete with vinyl case with clear
view pockets. Set includes one each of the following
sizes: 3.2, 3.5, 4, 4.5, 5, 5.5, 6, 7, 8, 9mm. Order
code: 160 0106 010. |
|
Carl Walter 160-10 |
Carl Walter
160-10 Electronic double open end spanner 10mm.
Extra thin jaws 3mm. 100mm in length. Order Code:
160 0010 010
|
$15.99 |
Carl Walter 160-11 |
Carl Walter
160-11 Electronic double open end spanner 11mm.
Extra thin jaws 3mm. 115mm in length. Order Code:
160 0011 010
|
$15.99 |
Carl Walter 160-12 |
Carl Walter
160-12 Electronic double open end spanner 12mm.
Extra thin jaws 3mm. 115mm in length. Order Code:
160 0012 010
|
$16.90 |
Carl Walter 160-13 |
|
$18.58 |
Carl
Walter 160-14 |
Carl Walter 160-14 Electronic double
open end spanner 14mm. Extra thin jaws 3mm. 130mm in
length. Order Code: 160 0014 010 |
$19.17 |
Carl
Walter 160/5 |
Carl
Walter
160/5 Metric Double Open-End Spanner Set that are the
same size at both ends, jaws angled 15° and 75°. Type
160. These wrenches have extra thin jaws only 3mm
thick. Made with special tool steel and chrome plated.
A high quality set made in Germany. This set
includes one of each of the following sizes:
10mm Length 100mm type ELEKTRO-160 11mm Length 115mm type ELEKTRO-160 12mm Length 115mm type ELEKTRO-160 13mm Length 130mm type ELEKTRO-160 14mm Length 130mm type ELEKTRO-160 |
$69.99 |
|
Carl Walter
160/9SAE Set of 9 Electronic double open-end spanner
that is the same size at both ends, jaws angled 15º
and 75º. Extra thin jaws, special tool steel, chrome
plated. Complete with cloth case with clear view
pockets. Set includes one of each of the following
sizes: 5/32, 3/16, 1/4, 5/16, 11/32, 3/8, 7/16, 1/2,
9/16" in SAE inch. Order Code: 160 0096 010.
![]() ![]() |
|
Carl
Walter
160-3/8 |
Carl Walter
160-3/8 Double Open Ended Spanner 3/8" inch. Same size
at both ends jaws angled 15º and 75º. Extra thin
jaws, special tool steel, chrome plated. Length
100mm (4"inches). Order Code: 160 8118 010 |
$15.89 |
Carl Walter 9785 |
Carl Walter 9785 car electrical tester. Made from brass with a protective cap. It has a sharp 10mm long tip. Good for old 6-24 volt car electrical systems, like found on old Volkswagens. Not for checking electronic components. Order Code: 53541 | |
. |
|
. |
Carl Walter 9470 |
Carl Walter 9470 VW
Exhaust Spring Tool. Used for mounting/dismounting of
exhaust springs of Golf, Jetta, Scirocco. Chrome/black
nickel plated. No Longer
Available!--see Klann KL-0284-22
![]() |
(Picture) |
. |
|
. |
Carl
Walter 6100/100 |
Carl
Walter
6100/100
-- 100 gram (4 oz) Engineer's hammer 47550. Head
length 82mm (3"). Wood handle. Overall length 260mm
(10-1/4") . -- NO Longer Available. |
(Picture) |
Carl Walter 7160 |
Carl Walter 7160
Special Dinging Hammer. This hammer can be used to
smooth dents and bumps in sheet metal. CW #48430-- NO Longer Available. ![]() |
|
. |
|
. |
Carl
Walter 34120-Set |
Carl Walter
34120-Set Impact hex bit set. One of each of the above
in mm sizes, 3, 4, 5, 6, 8, 10. All 5/16" (8mm) drive. |
$37.99 |
. |
|
. |
Carl Walter 1515-14 |
Carl Walter 1515-14
Hex Bit 3/4" dr 14mm. 60mm long. Extra Strong.
Made to DIN7422 standard. CW #20901. |
$90.08 (Picture) |
Carl Walter 1515-17 |
Carl Walter 1515-17
Hex Bit 3/4" dr 17mm. 60mm long. Extra Strong.
Made to DIN7422 standard. CW #20911.![]() |
$91.21 |
Carl Walter 1515-19 |
Carl Walter 1515-19
Hex Bit 3/4" dr 19mm. 60mm long. Extra Strong.
Made to DIN7422 standard. CW #20921.
![]() |
$92.05
|
Carl Walter 1515-22 |
Carl Walter 1515-22
Hex Bit 3/4" dr 22mm. 60mm long. Extra Strong.
Made to DIN7422 standard. CW #20931.
![]() |
$92.05
|
Carl Walter 1515-24 |
Carl Walter
1515-24 Hex Bit 3/4" dr 24mm. 60mm long. Extra Strong.
Made to DIN7422 standard. CW #20941.
|
|
Carl Walter 1515-27 |
Carl Walter 1515-27
Hex Bit 3/4" dr 27mm. 60mm long. Extra Strong. Made to
DIN 7422 standard. CW #20951.
![]() |
|
. |
|
. |
Carl Walter 25802-14 |
Carl Walter
25802-14 Hex bit impact socket. 3/4" drive, 14mm hex.
CW #25802 0140 040. 95mm in length. ![]() |
|
Carl
Walter 25802-17 |
Carl
Walter
25802-17 Hex bit impact socket. 3/4" drive, 17mm hex.
CW #25802 0170 040. 95mm in length |
$127.62 |
Carl Walter 25802-19 |
Carl Walter
25802-19 Hex bit impact socket. 3/4" drive, 19mm hex.
CW #25802 0190 040. 95mm in length.
|
$115.30
|
Carl
Walter 25802-22 |
Carl
Walter
25802-22 Hex bit impact socket. 3/4" drive, 22mm hex.
CW #25802 0220 040. 100mm (4" inch) in length. Heavy
duty 1 piece construction. |
$118.83 (Picture) |
Carl
Walter 25802-24 |
Carl
Walter
25802-24 Hex bit impact socket. 3/4" drive, 24mm hex.
CW #25802 0240 040. 95mm in length. |
$120.99 |
Carl Walter 25802-27 |
Carl Walter
25802-27 Hex bit impact socket. 3/4" drive, 27mm hex.
CW #25802 0270 040. 95mm in length.
|
. |
exchangeable bits 3/4" drive |
. | ||||||
![]() |
||||||||
Carl Walter 25809 |
Carl Walter 25809
Impact Adapter 3/4" square drive to 16mm hex. With set
screw. CW #57940 |
$168.65
|
||||||
Carl Walter 25807-10 |
Carl Walter
25807-10 Impact Hex Bit 10mm with 16mm hex drive. Used
with special 3/4" drive adapter 57940 Sold Separately.
CW #57941
|
$33.59
|
||||||
Carl Walter 25807-12 |
Carl Walter
25807-12 Impact Hex Bit 12mm with 16mm hex drive. Used
with special 3/4" drive adapter 57940 Sold Separately.
CW #57942 |
$33.59
|
||||||
Carl Walter 25807-14 |
Carl Walter
25807-14 Impact Hex Bit 14mm with 16mm hex drive. Used
with special 3/4" drive adapter 57940 Sold Separately.
CW #57943
|
$34.30
|
||||||
Carl Walter 25807-17 |
Carl Walter
25807-17 Impact Hex Bit 17mm with 16mm hex drive. Used
with special 3/4" drive adapter 57940 Sold Separately.
CW #57945
|
$36.83
|
||||||
Carl Walter 25807-19 |
Carl Walter
25807-19 Impact Hex Bit 19mm with 16mm hex drive. Used
with special 3/4" drive adapter 57940 Sold Separately.
CW #57946
|
$37.54
|
||||||
Carl Walter 25807-22 |
Carl Walter
25807-22 Impact Hex Bit 22mm with 16mm hex drive. Used
with special 3/4" drive adapter 57940 Sold Separately.
CW #57947
|
$39.45
|
||||||
Carl Walter 25807-24 |
Carl Walter
25807-24 Impact Hex Bit 24mm with 16mm hex drive. Used
with special 3/4" drive adapter 57940 Sold Separately.
CW #57948.
|
$41.71 |
||||||
. |
|
. | ||||||
IMPACT BITS Available 14-36MM |
|
Sizes Below |
||||||
Carl Walter 26809 |
Carl Walter 26809
Impact Adapter 1" square drive to 22mm hex. With set
screw. CW #58270.
![]() |
$211.57 (Picture) |
||||||
Carl
Walter 26809-26807-14-36 |
Carl
Walter
26809 (CW# 58270) 1" square drive to 22mm hex impact
adapter with set screw, and Carl Walter Hex Bit
Sockets in the following sizes: 26807-14-
CW# 58271 Bit 14mm
26807-17- CW# 58272 Bit 17mm 26807-19- CW# 58273 Bit 19mm 26807-22- CW# 58275 Bit 22mm 26807-24- CW# 58276 Bit 24mm 26807-27- CW# 58277 Bit 27mm 26807-30- CW# 58278 Bit 30mm 26807-32- CW# 58279 Bit 32mm 26807-36- CW# 58280 Bit 36mm |
$691.00 |
||||||
Carl Walter 26807-14 |
Carl Walter
26807-14 Impact Hex Bit 14mm with 22mm drive. Used
with special 1" drive adapter 26809, sold separately.
CW #58271. |
$44.00
|
||||||
Carl Walter 26807-17 |
Carl Walter
26807-17 Impact Hex Bit 17mm with 22mm drive. Used
with special 1" drive adapter 26809, sold separately.
CW #58272. |
$45.00
|
||||||
Carl Walter 26807-19 |
Carl Walter
26807-19 Impact Hex Bit 19mm with 22mm drive. Used
with special 1" drive adapter 26809, sold separately.
CW #58273. |
$49.99
|
||||||
Carl Walter 26807-22 |
Carl Walter
26807-22 Impact Hex Bit 22mm with 22mm drive. Used
with special 1" drive adapter 26809, sold separately.
CW #58275.
|
$49.99
|
||||||
Carl Walter 26807-24 |
Carl Walter
26807-24 Impact Hex Bit 24mm with 22mm drive. Used
with special 1" drive adapter 26809, sold separately.
CW #58276. |
$59.99
|
||||||
Carl Walter 26807-27 |
Carl Walter
26807-27 Impact Hex Bit 27mm with 22mm drive. Used
with special 1" drive adapter 26809, sold separately.
When installed in the adapter the overall length is
93mm. CW #58277. |
$63.99
|
||||||
Carl Walter 26807-30 |
Carl Walter
26807-30 Impact Hex Bit 30mm with 22mm drive. Used
with special 1" drive adapter 26809, sold separately.
CW #58278.
![]() |
|||||||
Carl Walter 26807-32 |
Carl Walter
26807-32 Impact Hex Bit 32mm with 22mm drive. Used
with special 1" drive adapter 26809, sold separately.
CW #58279.
![]() |
|||||||
Carl Walter 26807-36 |
Carl Walter
26807-36 Impact Hex Bit 36mm with 22mm drive. Used
with special 1" drive adapter 26809 which is sold
separately. CW #58280.![]() |
|||||||
. |
|
. | ||||||
Carl Walter 1000 N CV 4L |
Carl
Walter
1000 N CV 4L Carl Walter Hex Key Code: 13393
chrome vanadium steel, nickel plated. Size 4mm, 140mm
long, 25mm wide. |
$3.43 |
||||||
Carl Walter 1000 N CV 5L |
Carl
Walter
1000 N CV 5L Carl Walter Hex Key Code: 13403
chrome vanadium steel, nickel plated. Size 5.0mm,
160mm long, 28mm wide. |
$5.62 |
||||||
Carl Walter 1000 N CV 6L |
Carl
Walter
1000 N CV 6L Carl Walter Hex Key Code: 13413 chrome
vanadium steel, nickel plated Size 6.0mm, 180mm long,
32mm wide.
|
$7.84 |
||||||
Carl Walter 1000 N CV 8L |
Carl
Walter
1000 N CV 8L Carl Walter Hex Key Code: 13433 chrome
vanadium steel, nickel plated Size 8.0mm, 200mm long,
36mm wide.
|
$14.70 |
||||||
Carl Walter 1000 N CV10L |
Carl
Walter
1000 N CV 10L Carl Walter Hex Key Code: 13453 chrome
vanadium steel, nickel plated Size 10.0mm, 224mm long,
40mm wide.
|
$24.10 |
||||||
Carl Walter 1005 N 4 LA |
Carl
Walter
1005 N 4 LA Ball
End Hex Key, Long 1005 N 4 LA 10050040030
chrome vanadium steel, nickel plated. Size 4.0mm,
140mm long, 25mm wide. |
$5.51 |
||||||
Carl Walter 1005 N 5 LA |
Carl
Walter
1005 N 5 LA Ball
End Hex Key, Long 1005 N 5 LA 10050050030
chrome vanadium steel, nickel plated. Size 5.0mm,
160mm long, 28mm wide. |
$7.49 |
||||||
Carl Walter 1005 N 6 LA |
Carl
Walter
1005 N 6 LA Ball
End Hex Key, Long 1005 N 6 LA 10050060030
chrome vanadium steel, nickel plated. Size 6.0mm,
180mm long, 32mm wide. |
$10.81 |
||||||
Carl Walter 1005 N 8 LA |
Carl
Walter
1005 N 8 LA Ball
End Hex Key, Long 1005 N 8 LA 10050080030
chrome vanadium steel, nickel plated. Size 8.0mm,
200mm long, 36mm wide. |
$17.13 |
||||||
Carl Walter 1005 N 10 LA |
Carl
Walter
1005
N 10 LA Ball End
Hex Key, Long 1005 N 10 LA 10050100030 chrome
vanadium steel, nickel plated. Size 10.0mm, 224mm
long, 40mm wide. |
$28.49 |
||||||
Carl Walter 1000S WS 27 |
Carl Walter 1000S
WS 27 Type 1000S WS 27, Hex key 27mm. 250mm x 100mm.
Black finish. CW #13045.
![]() |
$206.55
|
||||||
. |
|
. | ||||||
. | Carl Walter Deep
Impact Sockets with thin walls.
![]() |
. | ||||||
Carl Walter 22100 L-17 |
Carl Walter 22100 L-17 Lug Nut socket, 1/2" drive, 17mm, 78mm long. 26mm diameter CW #22100 0170 040. |
$47.52
|
||||||
Carl Walter 22100 L-19 |
Carl Walter 22100
L-19 Lug Nut socket, 1/2" drive, 19mm, 78mm long. 28mm
diameter CW #22100 0190 040. |
$54.92
(Picture) |
||||||
Carl Walter 22100 L-21 |
Carl Walter 22100 L-21 Lug Nut socket, 1/2" drive, 21mm, 78mm long. 29mm diameter. CW #22100 0210 040. |
$56.33
|
||||||
Carl
Walter 22100 L-22 |
Carl
Walter 22100 L-22 Lug Nut Socket, 1/2" drive, 22mm,
78mm long. CW #22100 0220 040. |
$62.87 |
||||||
. |
|
. | ||||||
![]() |
||||||||
Carl
Walter 3500/2 |
Carl
Walter
3500/2 Screw extractor, set of 6. Chrome vanadium
steel. In a plastic box. CW #44584. With the following sizes: 3500/10 screw M3-M6 3500/20 screw M6-M8 3500/30 screw M8-M11 3500/40 screw M11-M14 3500/50 screw M14-M18 3500/60 screw M18-M24 Discontinued. We have a few left. |
$45.34 (Picture) |
||||||
Carl Walter 6060/22 |
Carl Walter 6060/22
Hex Clean. Hex head cleaner that removes old paint
layers in no time with one hammer blow. Comes with 6
blades. Unique and ideal tool! Special
Order Only!!
![]() ![]() |
on Request |
||||||
Carl Walter 7810/2 |
Carl Walter 7810/2
Set of 5 hacksaw blades. Standard 12" (300mm) long
blades, with 24 teeth for cutting metal. DIN 6494 Form
A specification. For faster cutting and better
results. CW #49184.
![]() |
$17.99
|
||||||
Carl
Walter 7820/3 |
Carl
Walter 7820/3 Mini File Set. CW#: 49225. The set
includes 6 files with wooden handles. You get six
super sharp mini files, each with its own wood handle.
Each file is about 170mm (6-5/8") long. This set comes
in a vinyl storage pouch. Set includes the
following:
|
(Picture) |
||||||
. |
|
. | ||||||
4220/6T |
Carl Walter 4220/6T
Number 45295. Long round nose pliers with long, round
jaws, tips turned. Red vinyl grip-handles. 160mm long.
CW #45295. No
Longer Available. |
|||||||
4525 |
Carl Walter 4525
Grip Pliers with Parallel-Plus movable jaw. The lower
jaw will pivot on a pin. With 35mm (1-3/8")
Maximum Opening. Black finish 9.5" in length. Large
easy-action release lever. CW #46073. ( Picture 2 ) ( Picture 3 ) ( Picture 4 ) ( Picture 5 ) ( Picture 6 ) |
|||||||
Carl Walter 4720/2 |
Carl Walter 4720/2
Pair of riveting pliers for blind rivets that are
sized between 2.4-5mm in diameter and are made of
aluminum alloy. Also for rivets up to 4mm that are
made of steel. Wrench and head are included with the
pliers. *No Longer Available. |
|||||||
. |
|
. | ||||||
Carl Walter 1356 C |
Carl
Walter
1356 C 3/8" drive reversible ratchet. Features 30
teeth. About 200mm (8") long. Plastic handle for
comfort in the cold. Internal working parts are
replaceable. Order Code: 17941 |
$105.72 |
||||||
Carl
Walter 1367C |
Carl
Walter
1367C Reversible Flex Ratchet 3/8" drive. Fine Tooth.
It has 60 teeth and is about 250mm (10") long. It has
a plastic handle for comfort and is chrome vanadium
steel, chrome plated. Order Code: 17931. *Special order only!! |
$132.97 |
||||||
BOLTMAX System |
![]() |
on |
||||||
Free
Wheel
Ratchet - 1/2", 3/4", 1" Drive |
||||||||
Carl Walter 2160C |
Carl Walter 2160C
Friction Ratchet 1/2" drive. With removable push
through adapter. Push the adapter to the other side to
change direction. Overall 10" long. Order Code: 28891 |
$177.63 (Pic 2) |
||||||
Carl
Walter
2210C |
Carl
Walter
2210C Friction Ratchet 3/4" drive with removable push
through adapter. With handle 2350 Nr. 20, length
500mm. CW# 28911 |
$479.02 |
||||||
Carl Walter 2280PH | Carl
Walter
2280PH Friction Ratchet 1" drive with removable push
through adapter. With handle 2350 Nr. 35, length
900mm. CW# 28964 |
$2,061.05 |
||||||
Free Wheel Ratchet - 12 Point Insert | ||
Carl Walter 2350 PH |
Carl Walter 2350 PH
Free Wheel Ratchet. Type 2350PH available in size 8mm
to 80mm with 12 point insert. The Free Wheel type
ratchet will stand extremely high loads, much higher
than a regular ratchet with teeth. Due to the design
there is practically no wear and tear. Useful in very
tight spaces due to the friction design. Some sizes
are in stock, other sizes are available. This style of
wrench is frequently used on industrial heat
exchangers. Special
Order.
![]() ![]() ![]() ![]() |
on Request |
Carl Walter 2350 PH with 6-Point |
Do you need the same
size ratchet but with 6-Point Insert? For example the
2351 35" SW 50 6-kant, order Code 299943550
insert. Carl Walter will custom make the size you
need! Contact Samstag Sales for a quote. |
Price
on Request |
Carl Walter 2350PH-6-8 | Carl Walter 2350PH-6-8 Free Wheel ratchet 8mm, 12 point, overall length 150mm (6") handle. CW #29124. | $120.52 |
Carl Walter 2350PH-6-9 | Carl Walter 2350PH-6-9 Free Wheel ratchet 9mm, 12 point, overall length 150mm (6") handle. CW #29134. | $124.27 |
Carl Walter 2350PH-6-10 | Carl Walter 2350PH-6-10 Free Wheel ratchet 10mm, 12 point, overall length 150mm (6") handle. CW #29144. | $124.27 |
Carl Walter 2350PH-6-11 | Carl Walter 2350PH-6-11 Free Wheel ratchet 11mm, 12 point, overall length 150mm (6") handle. CW #29154. | $124.27 |
Carl Walter 2350PH-6-12 | Carl Walter 2350PH-6-12 Free Wheel ratchet 12mm, 12 point, overall length 150mm (6") handle. CW #29164. | $124.27 |
Carl Walter 2350PH-6-13 | Carl Walter 2350PH-6-13 Free Wheel ratchet 13mm, 12 point, overall length 150mm (6") handle. CW #29174. | $124.27 |
Carl Walter 2350PH-8-10 | Carl Walter 2350PH-8-10 Free Wheel ratchet 10mm, 12 point, overall length 210mm (8") handle. CW #29185. | $174.71 |
Carl Walter 2350PH-8-11 | Carl Walter 2350PH-8-11 Free Wheel ratchet 11mm, 12 point, overall length 210mm (8") handle. CW #29187. | $174.71 |
Carl Walter 2350PH-8-12 | Carl Walter 2350PH-8-12 Free Wheel ratchet 12mm, 12 point, overall length 210mm (8") handle. CW #29188. | $174.71 |
Carl Walter 2350PH-8-13 |
Carl Walter
2350PH-8-13 Free Wheel ratchet 13mm, 12 point, overall
length 210mm (8") handle. CW #29189. Limited Quantity available at sale
price. |
Sale!
$79.99 $174.71
|
Carl Walter 2350PH-8-14 | Carl Walter 2350PH-8-14 Free Wheel ratchet 14mm, 12 point, overall length 210mm (8") handle. CW #29194. | $174.71 |
Carl Walter 2350PH-8-15 | Carl Walter 2350PH-8-15 Free Wheel ratchet 15mm, 12 point, overall length 210mm (8") handle. CW #29204. | $174.71 |
Carl Walter 2350PH-8-16 | Carl Walter 2350PH-8-16 Free Wheel ratchet 16mm, 12 point, overall length 210mm (8") handle. CW #29214. | $174.71 |
Carl Walter 2350PH-8-17 | Carl Walter 2350PH-8-17 Free Wheel ratchet 17mm, 12 point, overall length 210mm (8") handle. CW #29224. | $174.71 |
Carl Walter 2350PH-8-18 | Carl Walter 2350PH-8-18 Free Wheel ratchet 18mm, 12 point, overall length 210mm (8") handle. CW #29234. | $174.71 |
Carl Walter 2350PH-12-21 | Carl Walter 2350PH-12-21 Free Wheel ratchet 21mm, 12 point, overall length 305mm (12") handle. CW #29315. | $259.61 |
Carl Walter 2350PH-12-22 | Carl Walter 2350PH-12-22 Free Wheel ratchet 22mm, 12 point, overall length 305mm (12") handle. CW #29316. | $259.61 |
Carl Walter 2350PH-12-24 | Carl Walter 2350PH-12-24 Free Wheel ratchet 24mm, 12 point, overall length 305mm (12") handle. CW #29324. | $279.43 |
Carl Walter 2350PH-12-27 | Carl Walter 2350PH-12-27 Free Wheel ratchet 27mm, 12 point, overall length 305mm (12") handle. CW #29334. | $272.82 |
Carl Walter 2350PH-12-28 | Carl Walter 2350PH-12-28 Free Wheel ratchet 28mm, 12 point, overall length 305mm (12") handle. CW #29344. | $270.62 |
Carl Walter 2350PH-20-30 | Carl Walter 2350PH-20-30 Free Wheel ratchet 30mm, 12 point, overall length 500mm (20") handle. CW #29395. | $522.69 |
Carl Walter 2350PH-20-32 | Carl Walter 2350PH-20-32 Free Wheel ratchet 32mm, 12 point, overall length 500mm (20") handle. CW #29397. | $480.84 |
Carl Walter 2350PH-20-33 | Carl Walter 2350PH-20-33 Free Wheel ratchet 33mm, 12 point, overall length 500mm (20") handle. CW #29398. | $480.84 |
Carl Walter 2350 PH-20-36 |
Carl Walter 2350
PH-20-36 Free wheel ratchet 36mm, 12 point, overall
length 500mm (20") handle. CW #29404.![]() ![]() |
$516.08
|
Carl Walter 2350PH-20-41 | Carl Walter 2350PH-20-41 Free Wheel ratchet 41mm, 12 point, overall length 500mm (20") handle. CW #29414. | $495.60 |
Carl Walter 2350PH-25-36 | Carl Walter 2350PH-25-36 Free Wheel ratchet 36mm, 12 point, overall length 625mm (25") handle. CW #29425. | $1051.58 |
Carl Walter 2350PH-25-41 | Carl Walter 2350PH-25-41 Free Wheel ratchet 41mm, 12 point, overall length 625mm (25") handle. CW #29427. | $1027.35 |
Carl Walter 2350PH 25-46 |
Carl Walter 2350 PH
25-46 Free
Wheel Ratchet 46mm, 12
point, overall length 625 (25") handle. CW
#29434 Ships 8 Pounds. |
|
Carl
Walter 2350PH 25-50 |
Carl Walter
2350PH-25-50 Free Wheel Ratchet 50mm, 12 point,
overall length 625 (25") handle. CW #29444 |
$996.52 |
Carl
Walter 2350PH 25-52 |
Carl Walter
2350PH-25-52 Free Wheel Ratchet 52mm, 12 point,
overall length 625 (25") handle. CW #29454 |
$989.91 |
★ | ||
Carl
Walter 2350PH 30-55 |
Carl Walter 2350 PH
30-55 Free Wheel Ratchet 55mm, 12 point, overall
length 760mm (30") handle. CW #29474 Ships 10 Pounds.
Built from 2 parts: 2350PH-30 (29464) handle with 2351
PH-55 (29974) Insert. *Call or eMail with your shipping
address to order this tool. |
$1241.02 |
Carl
Walter 2350PH 30-60 |
Carl Walter
2350PH-30-60 Free Wheel Ratchet 60mm, 12 point,
overall length 760mm (30") handle. CW #29484 Ships
10 Pounds. Built from 2 parts: 2350PH-30 (29464)
handle with 2351 PH-60 (29984)
Insert.
*Call or eMail
with your shipping address to order this tool. |
$1207.42 |
Carl
Walter 2350PH 35-65 |
Carl Walter
2350PH-35-65 Free Wheel Ratchet 65mm, 12 point,
overall length 889mm (35") handle. CW #29504 |
Price on Request |
Carl
Walter 2350PH 35-70 |
Carl Walter
2350PH-35-70 Free Wheel Ratchet 70mm, 12 point,
overall length 889mm (35") handle. CW #29514 |
Price on Request |
2350PH-35 Spare Parts |
Repair Parts For
35" Handle. Ball (656700100000), Washer
(23502404000), Spring (656020988355), Screw (650009630616), Bolt (23501640000) |
Price
on Request |
Carl Walter
2350PH 40-75 (29534)
|
Carl Walter 2350PH-40-75 Free Wheel Ratchet 75mm, 12 point, overall length 1000mm (40") handle. CW #29534 Built from 2 parts: 2350PH-40 (29524) handle, with 2351 PH-75 (30034) insert. | Price on Request |
★ | ||
Carl
Walter 2350PH 40-80 (29544)
|
Carl Walter 2350PH-40-80 Free Wheel Ratchet 80mm, 12 point, overall length 1000mm (40") long. Head and handle welded together. With oval tube handle. CW #29544. Built from 2 parts: 2350PH-40 (29524) handle, with 2351 PH-80 (30044) insert. | Price on Request |
Carl Walter 2350PH 40-85 |
Carl Walter 2350PH-40-85 Free Wheel Ratchet 85mm, 12 point, overall length 1000mm (40") long. Head and handle welded together. With oval tube handle. CW #23504085040 | Price
on Request |
Free
Wheel
Ratchet - Square Insert |
||
Carl
Walter 2360 PH |
Carl
Walter
2360 PH Free wheel ratchet. Type 2360PH complete with
female square insert available in size 8mm to 65mm.
Spare Inserts also available separately. **Special Order Only. |
on Request |
Carl Walter 2360PH-6-8 |
Carl Walter 2360 PH-6-8 Free
wheel ratchet complete with 8mm female square
insert. 150mm or 6" handle. CW# 30104 Special Order. |
Price on Request |
Carl Walter 2360PH-6-9 |
Carl Walter 2360 PH-6-9 Free
wheel ratchet complete with 9mm female square
insert. 150mm or 6" handle. CW# 30114 Special Order. |
Price on Request |
Carl Walter 2360PH-6-10 |
Carl Walter 2360 PH-6-10 Free
wheel ratchet complete with 10mm female square
insert. 150mm or 6" handle. CW# 30124 Special Order. |
Price on Request |
Carl Walter 2360PH-6-11 |
Carl Walter 2360 PH-6-11 Free
wheel ratchet complete with 11mm female square
insert. 150mm or 6" handle. CW# 30134 Special Order. |
Price on Request |
Carl Walter 2360PH-8-12 |
Carl Walter 2360 PH-8-12 Free
wheel ratchet complete with 12mm female square
insert. 210mm or 8" handle. CW# 30164 Special Order. |
Price on Request |
Carl Walter 2360PH-8-13 |
Carl Walter 2360 PH-8-13 Free
wheel ratchet complete with 13mm female square
insert. 210mm or 8" handle. CW# 30174 Special Order. |
Price on Request |
Carl Walter 2360PH-8-14 |
Carl Walter 2360 PH-8-14 Free
wheel ratchet complete with 14mm female square
insert. 210mm or 8" handle. CW# 30184 Special Order. |
Price on Request |
Carl Walter 2360PH-8-15 |
Carl Walter 2360 PH-8-15 Free
wheel ratchet complete with 15mm female square
insert. 210mm or 8" handle. CW# 30194 Special Order. |
Price on Request |
Carl Walter 2360PH-10-16 |
Carl Walter 2360 PH-10-16 Free
wheel ratchet complete with 16mm female square
insert. 255mm or 10" handle. CW# 30224 Special Order. |
Price on Request |
Carl Walter 2360PH-10-17 |
Carl Walter 2360 PH-10-17 Free
wheel ratchet complete with 17mm female square
insert. 255mm or 10" handle. CW# 30234 Special Order. |
Price on Request |
Carl Walter 2360PH-10-18 |
Carl Walter 2360 PH-10-18 Free
wheel ratchet complete with 18mm female square
insert. 255mm or 10" handle. CW# 30244 Special Order. |
Price on Request |
Carl Walter 2360PH-10-19 |
Carl Walter 2360 PH-10-19 Free
wheel ratchet complete with 19mm female square
insert. 255mm or 10" handle. CW# 30254 Special Order. |
Price on Request |
Carl Walter 2360PH-10-20 |
Carl Walter 2360 PH-10-20 Free
wheel ratchet complete with 20mm female square
insert. 255mm or 10" handle. CW# 30264 Special Order. |
Price on Request |
Carl Walter 2360PH-12-21 |
Carl Walter 2360 PH-12-21 Free
wheel ratchet complete with 21mm female square
insert. 305mm or 12" handle. CW# 30294 Special Order. |
Price on Request |
Carl Walter 2360PH-12-22 |
Carl Walter 2360 PH-12-22 Free
wheel ratchet complete with 22mm female square
insert. 305mm or 12" handle. CW# 30304 Special Order. |
Price on Request |
Carl Walter 2360PH-12-24 |
Carl Walter 2360 PH-12-24 Free
wheel ratchet complete with 24mm female square
insert. 305mm or 12" handle. CW# 30314 Special Order. |
Price on Request |
Carl Walter 2360PH-15-27 |
Carl Walter 2360 PH-15-27 Free
wheel ratchet complete with 27mm female square
insert. 375mm or 15" handle. CW# 30334 Special Order. |
Price on Request |
Carl Walter 2360PH-15-28 |
Carl Walter 2360 PH-15-28 Free
wheel ratchet complete with 28mm female square
insert. 375mm or 15" handle. CW# 30344 Special Order. |
Price on Request |
Carl Walter 2360PH-20-30 |
Carl Walter 2360 PH-20-30 Free
wheel ratchet complete with 30mm female square
insert. 500mm or 20" handle. CW# 30364 Special Order. |
Price on Request |
Carl Walter 2360PH-20-32 |
Carl Walter 2360 PH-20-32 Free
wheel ratchet complete with 32mm female square
insert. 500mm or 20" handle. CW# 30374 Special Order. |
Price on Request |
Carl Walter 2360PH-20-36 |
Carl Walter 2360 PH-20-36 Free
wheel ratchet complete with 36mm female square
insert. 500mm or 20" handle. CW# 30384 Special Order. |
Price on Request |
Carl Walter 2360PH-25-38 |
Carl Walter 2360 PH-25-38 Free
wheel ratchet complete with 38mm female square
insert. 625mm or 25" handle. CW# 30404 Special Order. |
Price on Request |
Carl Walter 2360PH-25-41 |
Carl Walter 2360 PH-25-41 Free
wheel ratchet complete with 41mm female square
insert. 625mm or 25" handle. CW# 30414 Special Order. |
Price on Request |
Carl Walter 2360PH-30-42 |
Carl Walter 2360 PH-30-42 Free
wheel ratchet complete with 42mm female square
insert. 760mm or 30" handle. CW# 30434 Special Order. |
Price on Request |
Carl Walter 2360PH-30-44 |
Carl Walter 2360 PH-30-44 Free
wheel ratchet complete with 44mm female square
insert. 760mm or 30" handle. CW# 30444 Special Order. |
Price on Request |
Carl Walter 2360PH-30-46 |
Carl Walter 2360 PH-30-46 Free
wheel ratchet complete with 46mm female square
insert. 760mm or 30" handle. CW# 30454 Special Order. |
Price on Request |
Carl Walter 2360PH-35-50 |
Carl Walter 2360
PH-35-50 Free wheel ratchet complete with 50mm female
square insert. 900mm or 35" handle. CW# 30474 Special Order. |
on Request |
Carl Walter 2360PH-35-52 |
Carl Walter 2360 PH-35-52 Free
wheel ratchet complete with 52mm female square
insert. 900mm or 35" handle. CW# 30484 Special Order. |
Price on Request |
Carl Walter 2360PH-35-55 |
Carl Walter 2360 PH-35-55 Free
wheel ratchet complete with 55mm female square
insert. 900mm or 35" handle. CW# 30494 Special Order. |
Price on Request |
Carl Walter 2360PH-40-60 |
Carl Walter 2360 PH-40-60 Free
wheel ratchet complete with 60mm female square
insert. 1000mm or 40" handle. CW# 30514 Special Order. |
Price on Request |
Carl Walter 2360PH 40-65 |
Carl
Walter 2360 PH-40-65 Free wheel ratchet complete with
65mm female square insert. 1000mm or 40" handle. CW# 30524 Special Order. ![]() |
on |
Carl Walter 2361PH-36 |
Carl Walter
2361PH-36 Spare part. Square Insert 36mm. To fit size
20 ratchet. CW #30824.![]() |
|
Free
Wheel
Ratchet - Handle Only |
||
2350PH Handles | ![]() |
|
2350PH-6 |
Carl
Walter
2350PH-6 Handle, overall length 150mm, inside diameter
approximately 20mm. CW #29114 |
$78.82 |
2350PH-8 | Carl Walter 2350PH-8 Handle, overall length 210mm, inside diameter approximately 27.5mm. CW #29184 | $109.09 |
2350PH-12 | Carl Walter 2350PH-12 Handle, overall length 305mm, inside diameter approximately 39.5mm. CW #29314 | $159.50 |
2350PH-20 | Carl Walter 2350PH-20 Handle, overall length 500mm, inside diameter approximately 56.5mm. CW #29394 | $306.55 |
2350PH-25 | Carl Walter 2350PH-25 Handle, overall length 625mm, inside diameter approximately 70mm. CW #29424 | $635.77 |
2350PH-30 | Carl Walter 2350PH-30 Handle, overall length 760mm, inside diameter approximately 82mm. CW #29464 | $738.91 |
2350PH-35 | Carl Walter 2350PH-35 Handle, overall length 900mm, inside diameter approximately 96mm. CW #29494 | $1,391.98 |
2350PH-40 | Carl Walter 2350PH-40 Handle, overall length 1000mm, inside diameter approximately 106.5mm. CW #29524 | $1,489.46 |
|
. | |
Carl Walter
|
Carl Walter
3225/1 Slotted Instrument Screwdriver, with low
voltage insulated blade. Red transparent handle. With
2.5mm x .4mm black tip. Overall length 130mm (5-1/8").
No Longer
Available. |
|
Carl Walter 3255-4 |
Carl Walter 3255/4
Slotted Instrument Screwdriver, with low voltage
insulated blade. Red transparent handle. With 4.0mm x
.8mm black tip. Overall length 215mm (8-1/2"). No Longer Available.
We have one left.
|
$14.90 |
Carl Walter 3260-2 |
Carl Walter
3260-2 Screwdriver, high-quality. Ergonomically shaped
and impact resistant handle. Handle is chemically
resistant. Carburetor screwdriver. DIN 5265.
1.0x5.5x125mm. CW #3260 0020 011.
![]() |
$21.43
|
Carl Walter 3270-2 |
Carl Walter
3270-2 Screwdriver, high-quality. Ergonomically shaped
and impact resistant handle. Handle is chemically
resistant. Phillips head. DIN 8764-2. PH 2x100. CW
#3270 0020 011.
![]() |
$20.36
|
Carl Walter 3277/2T |
Carl Walter 3277/2T
T7x70/150 torx screwdriver. Torx T7 Black tip. CW
#3277 0070 011.
![]() |
|
Carl Walter 3045 |
Carl Walter 3045
Screwdriver Set in display box 7 Piece. Blade made
of chrome vanadium steel. Order Code: 0304 5007
3040 Set comes in the following sizes: 3070/3 - 3 x 150 Phillips 3040/2 - 1.0 x 5.5 x 125 Slotted Engineer 3040/3 - 1.2 x 6.5 x 150 Slotted Engineer 3070/2 - 2 x 100 Phillips 3070/1 - 1 x 80 Phillips 3050/3 - 0.6 x 4.0 x 100 Slotted Instrument 3050/2 - 0.5 x 3.0 x 75 Slotted Instrument (Out of Stock) |
|
Carl
Walter 50250 |
Carl
Walter
50250 7 piece Screwdriver Set in cardboard display
box. With flat and Phillips blades, 1000 volts
insulated. Order Code: 502500073040. ***SPECIAL ORDER!!! Includes the following sizes: 50240-1 - 0.4x2.5x75 50240-3 - 0.6x3.5x100 50240-4 - 0.8x4.0x100 50240-6 - 1.0x5.5x126 50240-7 - 1.2x6.5x150 50245-1 - PH1x80 50245-2 - PH2x100 |
$137.23 (Picture) |
. |
Sockets-1/4" drive |
. |
Carl
Walter 1215 CP 5 |
Carl
Walter
1215 CP 5 Hex Bit, 5mm, 1/4" drive. Chrome vanadium
steel, chrome plated body and black tip. 31mm in
length. Order Code: 000000016888 |
$11.99 (Picture) |
2 |
|
l |
Carl Walter 7-6x75mm |
Carl Walter
7-6x75mm Locking Pins for impact sockets Nr. 7 - 6x75.
CW #59234. |
$6.63
|
Carl Walter 7-75x10mm |
Carl Walter
7-75x10mm Locking Ring Nr. 7 - 75x10 Safety Rubber
Ring. CW #59337 |
$9.87
|
Carl Walter Type 27000L |
Impact. 1-1/2"
Drive, Long Version. Size 41mm to 120mm. |
Price
on Request |
Socket Set 3/8" Drive |
||
Carl Walter 17961 |
Carl Walter 17961
Metric Socket Set 3/8" Drive. type 1370/05 MM C. This
set is supplied in a strong metal case with old style
hammer paint finish. Includes these tools. (1.) Type 1300 Sockets, 4 metric sockets with 3/8" drive 6 points, in size 6, 7, 8, 9mm (2.) Type 1310 Sockets, 13 metric sockets with 3/8" drive 12 points, in size 10, 11, 12, 13, 14, 15, 16, 17, 18 19, 20, 21, 22mm. (3.) Number 1337 Sliding T-handle. (4.) Number 1333 Extension 10" (5.) Number 1331 Extension 5" (6.) Number 1330 Swivel (7.) Number 1320 Screwdriver Bit 1.6x10mm (8.) Number 1338 Speeder Handle (9.) Number 1365 Ratchet, Fine Tooth, 60 Teeth, Reversible. |
Price
on Request |
1310 |
Type
1310
Sockets, 12 point 3/8"' drive. Available in the
following sizes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm,
16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm. |
Price on Request |
1320 |
1320
Flat-head Screwdriver bit 3/8" drive. Tip size
1.6x10mm. CW#17751 |
Price on Request |
1330 |
1330
Universal
Swivel Joint, 60mm. CW #17761 |
Price on Request |
1331 |
1331
Extension
5". CW#17771 |
Price on Request |
1333 |
1333
Extension
10". CW#17791 |
Price on Request |
1337 |
1337
Sliding
T-handle, 200mm. CW #17831 |
Price on Request |
1338 |
1338
Speeder
Handle, 300mm. CW#17841 |
Price on Request |
1365 | Carl
Walter 1365 Ratchet, Fine Tooth, 60 Teeth, Reversible,
Length 200mm (8" inch). CW order code #17921 |
$93.76 (Picture) |
Sockets- Slugging |
||
625PH | Type 625PH Slugging
sockets. . To be used with Type 620PH ring
slugging wrenches (not included). Available size 41mm
to 120mm. Male and female hexagon of same size. |
Price on Request |
l |
|
. |
Carl Walter 1090PH-16 |
Carl Walter
1090PH-16 Phosphatized 16mm diameter Tommy Bar, 400mm
(16") length. CW #14804.
![]() |
$87.09
|
Torque Multiplier |
||
Type Hx |
Boltmax g-power Hx
Torque Multiplier with low ratio. |
Price
on Request |
TYPE Mx |
![]() |
Price
on Request |
TYPE Rx |
![]() { Click on Picture for large view } |
|
Carl Walter Rx8 | Carl
Walter
Rx8 Torque Multiplier with integrated reaction anchor.
Ratio 1:3.5 800Nm Max. Input 1/2" output 3/4" drive.
1500g. CW #37010 |
Price On Request |
Carl Walter Rx18 |
Carl
Walter
Rx18 Torque Multiplier with integrated reaction
anchor. Ratio 1:3.6 1800Nm max. Input 3/4" output 1"
drive. 4400g. CW #37020 |
Price On Request |
Carl Walter Rx28 |
Carl
Walter
Rx28
Torque Multiplier with integrated reaction anchor.
Ratio 1:13 2800nm max. Input 1/2" output 1" drive.
6700g. CW #37030 |
Price On Request |
Carl Walter Mx8 |
Carl
Walter
Mx8
Torque Multiplier with angled reaction anchor. Ratio
1:3.5 600Nm max. Input 1/2" output 3/4" drive. 1300g.
CW #31010 |
Price On Request |
Carl Walter Mx18 |
Carl
Walter
Mx18
Torque Multiplier with angled reaction anchor. Ratio
1:3.6 1350Nm max. Input 3/4" output 1" drive. 3000g.
CW #31020 |
Price On Request |
Carl Walter Mx28 |
Carl
Walter
Mx28
Torque Multiplier with angled reaction anchor. Ratio
1:13 2400Nm max. Input 1/2" output 1" drive. 5200g. CW
#31030 |
Price On Request |
Torque
Screwdriver |
||
2625 - 2652 Type FTD |
Torque
Screwdrivers available size .3Ncm to 400Ncm. Hex 1/4"
drive. Dial Indicator type torque screwdriver with
memory pointer. Accuracy better then +/- 6%. |
Price
on Request |
. |
Wrenches, Adjustable | . |
Carl
Walter 210 CP 4 |
Carl
Walter
210 CP 4 Adjustable 4" wrench. It has extra strong
chrome vanadium steel and chrome plating. The head is
mirror polished. The jaws will open to 14mm with the
opening offset 22º. Made in Spain to the German DIN
3117 Form B Standard. Order Code: 03858 |
$34.14 (Picture) |
Carl Walter 210 CP 6 |
Carl Walter 210 CP
6 Adjustable 6" wrench. It has extra strong chrome
vanadium steel and chrome plating. The head is mirror
polished. The jaws will open to 20mm with the opening
offset 22º. Made in Spain to the German DIN 3117 Form
B Standard. Order Code: 03868
|
$39.14 (Picture) |
Wrenches, Double Box End |
||
Carl Walter 380PH |
Available Special Order
from Germany. Deep Offset Double Box End Wrenches
DIN838 Pattern. |
Price
on Request |
380PH-19x24 |
Carl
Walter
380PH-19x24 Deep Offset Double Box End Wrench, 311mm
long. Order Code: 07534 |
$56.80 Picture |
2 |
|
2 |
![]() |
||
Carl Walter Type 100PH |
Carl Walter Type 100PH Double Open End Wrench, Chrome Vanadium steel with phosphatized finish. Open ends offset 15 degree. Made to DIN 3110, ISO 3318 and ISO 1085 standards. | . |
Carl Walter 100PH-8x10 |
Carl Walter
100PH-8x10 Double Open End Wrench, 143mm in length. CW
#00134 |
$7.39
|
Carl Walter 100PH-9x11 |
Carl Walter
100PH-9x11 Double Open End Wrench, 157mm in length. CW
#00154 |
$10.52
|
Carl Walter 100PH-10x12 |
Carl Walter
100PH-10x12 Double Open End Wrench, 157mm in length.
CW #00174 |
$9.80
|
Carl Walter 100PH-11x13 |
Carl Walter
100PH-11x13 Double Open End Wrench, 171mm in length.
CW #00194 |
$14.43
|
Carl Walter 100PH-12x13 |
Carl Walter
100PH-12x13 Double Open End Wrench, 172mm in length.
CW #00204 |
$12.82
|
Carl Walter 100PH-13x14 |
Carl Walter
100PH-13x14 Double Open End Wrench, 180mm in length.
CW #00234 |
$16.26
|
Carl Walter 100PH-14x15 |
Carl Walter
100PH-14x15 Double Open End Wrench, 190mm in length.
CW #00254
|
$17.37
|
Carl Walter 100PH-16x17 |
Carl Walter
100PH-16x17 Double Open End Wrench, 205mm in length.
CW #00284 |
$22.81
|
Carl Walter 100PH-18x19 |
Carl Walter
100PH-18x19 Double Open End Wrench, 220mm in length.
CW #00304 |
$29.71
|
Carl Walter 100PH-20x22 |
Carl Walter
100PH-20x22 Double Open End Wrench, 237mm in length.
CW #00334
|
$36.58
|
Carl Walter 100PH-21x23 |
Carl Walter
100PH-21x23 Double Open End Wrench, 250mm in length.
CW #00344
|
$38.75
|
Carl Walter 100PH-24x26 |
Carl Walter
100PH-24x26 Double Open End Wrench, 270mm in length.
CW #00384 (Picture Back) (Picture Side) ![]() |
$49.92
|
Carl Walter 100PH-25x28 |
Carl Walter
100PH-25x28 Double Open End Wrench, 280mm in length.
CW #00414
|
$58.53
|
Carl Walter 100PH-27x30 |
Carl Walter 100PH-27x30 Double
Open End Wrench, 295mm in length. CW #00434
|
$72.20
|
Carl Walter 100PH-32x36 |
Carl Walter 100PH-32x36 Double
Open End Wrench, 323mm in length. CW #00474
|
$99.45
|
Wrench- Double Open End - DIN
895 |
||
Carl Walter Type 200PH |
Carl Walter Type 200PH Double
open
end wrenches made of special steel. Jaws have
opening of 15º. Available sizes up to 34x36 in
phosphatized. |
.
|
Carl Walter 200 PH 8x9 |
Carl Walter 200 PH 8x9 Double
open
end wrench, phosphatized, 117mm long. CW#
03434 |
$8.99
|
Carl Walter 200 PH 8x10 |
Carl Walter 200 PH 8x10 Double
open
end wrench, phosphatized, 115 mm long. CW#
03444 |
$9.99
|
Carl Walter 200 PH 10x11 |
Carl Walter 200 PH 10x11
Double open end wrench, phosphatized, 122 mm
long. CW# 03494 |
$11.00 |
Carl Walter 200 PH 10x14 |
Carl Walter 200 PH 10x14
Double open end wrench, phosphatized, 140 mm
long. CW# 03514 |
$16.99 |
Carl Walter 200 PH 12x14 |
|
$16.99 |
Carl Walter 200 PH 13x17 |
Carl Walter 200 PH 13x17 Double
open end wrench, phosphatized, 160 mm long. CW#
03584 |
$17.99 |
Carl Walter 200 PH 14x17 |
Carl Walter 200 PH 14x17 Double
open end wrench, phosphatized, 160 mm long. CW#
03594 |
$17.99 |
Carl Walter 200 PH 17x19 |
Carl Walter 200 PH 17x19 Double
open end wrench, phosphatized, 193 mm long. CW#
03604 |
$19.99 |
Carl Walter 200 PH 19x22 |
Carl Walter 200 PH 19x22 Double
open end wrench, phosphatized, 205 mm long. CW#
03624 |
$19.99 |
************** |
Wrench- Ring End | |
Carl Walter 460 SG-SET6 |
Set of 6 Ring
End Spanners. With size 13, 14, 17, 19, 22, 24mm. |
$279.99 |
Carl Walter 460 SG 13 |
Carl
Walter 460 SG 13 Ring Spanner 13mm. DIN 3111.
Straight, special steel, steel-gray, 140mm long. CW# 09005 |
$43.95
|
Carl Walter 460 SG 14 |
Carl Walter 460 SG 14
Ring Spanner 14mm. DIN 3111. Straight, special
steel, steel-gray, 140mm long. CW# 09015. No Longer Available. Limited Stock. |
$36.06
|
Carl Walter 460 SG 17 |
Carl
Walter 460 SG 17 Ring Spanner 17mm. DIN 3111.
Straight, special steel, steel-gray, 155mm long. CW
#09025
|
$43.70 |
Carl Walter 460 SG 19 |
Carl
Walter 460 SG 19 Ring spanner 19mm. DIN 3111.
Straight, special steel, steel-gray, 170mm long. CW
#09035.
|
$87.01 |
Carl Walter 460 SG 22 |
Carl
Walter 460 SG 22 Ring Spanner 22mm. DIN 3111.
Straight, special steel, steel-gray, 190mm long. CW
#09045. |
$54.59 (Picture) |
Carl Walter 460 SG 24 |
Carl
Walter 460 SG 24 Ring Spanner 24mm. DIN 3111.
Straight, special steel, steel-gray, 215mm long. CW
#09055. |
$73.83 |
Carl Walter 460 SG 27 |
Carl Walter 460 SG 27 Ring Spanner 27mm. DIN
3111. Straight,
special steel, steel-gray, 230mm long. CW #09065.
|
$69.25 |
. |
|
. |
Carl Walter Type 280PH |
|
. |
Carl Walter 280PH-6 |
Carl Walter 280PH-6 Combination
spanner
6mm,
100mm in length. CW #05014
|
$7.99
|
Carl Walter 280PH-7 |
Carl Walter 280PH-7 Combination
spanner
7mm,
110mm in length. CW #05024 |
$7.99
|
Carl Walter 280PH-8 |
Carl Walter 280PH-8 Combination
spanner 8mm, 120mm in length. CW #05034
|
$9.46
|
Carl Walter 280PH-9 |
Carl Walter 280PH-9 Combination
spanner 9mm, 130mm in length. CW #05044
|
$9.95
|
Carl Walter 280PH-10 |
Carl Walter 280PH-10 Combination
spanner 10mm, 140mm in length. CW #05054
|
$10.46
|
Carl Walter 280PH-11 |
Carl Walter 280PH-11 Combination
spanner 11mm, 150mm in length. CW #05064
|
$12.49
|
Carl Walter 280PH-12 |
Carl Walter 280PH-12 Combination
spanner 12mm, 160mm in length. CW #05074
|
$14.17
|
Carl Walter 280PH-13 |
Carl Walter 280PH-13 Combination
spanner 13mm, 170mm in length. CW #05084 |
|
Carl Walter 280PH-14 |
Carl Walter 280PH-14 Combination
spanner 14mm, 180mm in length. CW #05094
|
$18.55
|
Carl Walter 280PH-15 |
Carl Walter 280PH-15 Combination
spanner 15mm, 190mm in length. CW #05104
|
$21.65
|
Carl Walter 280PH-16 |
Carl Walter 280PH-16 Combination
spanner 16mm, 200mm in length. CW #05114
|
$23.62
|
Carl Walter 280PH-17 |
Carl Walter 280PH-17 Combination
spanner 17mm, 210mm in length. CW #05124
![]() |
$27.15
|
Carl Walter 280PH-18 |
Carl Walter 280PH-18
Combination spanner 18mm, 220mm in length. CW
#05134
|
$27.15
|
Carl Walter 280PH-19 |
Carl Walter 280PH-19 Combination
spanner 19mm, 230mm in length. CW #05144
![]() |
$35.54
|
Carl Walter 280PH-20 |
Carl Walter 280PH-20 Combination
spanner
20mm, 230mm in length. CW #05154 |
$36.86
|
Carl Walter 280PH-21 |
Carl Walter 280PH-21
Combination spanner 21mm, 240mm in length. CW
#05164 |
$39.84
|
Carl Walter 280PH-22 |
Carl Walter 280PH-22 Combination
spanner 22mm, 260mm in length. CW #05174
|
$42.55
|
Carl Walter 280PH-24 |
Carl Walter 280PH-24 Combination
spanner 24mm, 280mm in length. CW #05194
|
$51.14
|
Carl Walter 280PH-27 |
Carl Walter 280PH-27 Combination
spanner 27mm, 300mm in length. CW #05224
|
$66.99
|
. |
|
. |
Carl Walter Type 180PH |
Carl Walter Type 180PH Single
open
ended spanner, jaws have opening of 15º. Available
in sizes up to 38mm. Made to DIN 894
Standard. |
. |
Carl Walter 180PH-13 |
Carl Walter 180PH-13 Single
open ended spanner, 13mm, length 135mm. DIN
894. CW #03024
|
$8.97
|
. |
|
. |
. | Carl Wlater single ended open jaw spanner
for highest tightening requirements, extra long,
special alloy steel, phosphatized.
![]() |
. |
Carl Walter 560PH-22 |
Carl Walter 560PH-22 Single ended open jaw
spanner 22mm, 400mm in length, 600g. CW
#10597 |
Price on Request |
Carl Walter 560PH-24 |
Carl Walter 560PH-24 Single ended open jaw
spanner 24mm, 400mm in length, 600g. CW
#10607 |
Price on Request |
Carl Walter 560PH-27 |
Carl Walter 560PH-27 Single ended open jaw
spanner 27mm, 425mm in length, 800g. CW
#10617 |
Price on Request |
Carl Walter 560PH-30 |
Carl Walter 560PH-30 Single ended open jaw
spanner 30mm, 500mm in length, 1200g. CW
#10627 |
Price on Request |
Carl Walter 560PH-32 |
Carl Walter 560PH-32 Single ended open jaw
spanner 32mm, 500mm in length, 1200g. CW
#10637 |
Price on Request |
Carl Walter 560PH-36 |
Carl Walter 560PH-36 Single ended open jaw
spanner 36mm, 550mm in length, 1500g. CW
#10647 |
Price on Request |
Carl Walter 560PH-41 |
Carl Walter 560PH-41 Single ended open jaw
spanner 41mm, 600mm in length, 2000g. CW
#10657 |
Price on Request |
Carl Walter 560PH-46 |
Carl Walter 560PH-46 Single ended open jaw
spanner 46mm, 650mm in length, 2300g. CW
#10667 |
Price on Request |
Carl Walter 560PH-50 |
Carl Walter 560PH-50 Single ended open jaw
spanner 50mm, 700mm in length, 3100g. CW
#10677 |
Price on Request |
Carl Walter 560PH-55 |
Carl Walter 560PH-55 Single ended open jaw
spanner 55mm, 750mm in length, 3700g. CW
#10687 |
Price on Request |
Carl Walter 560PH-60 |
Carl Walter 560PH-60 Single ended open jaw
spanner 60mm, 800mm in length, 4300g. CW
#10697 |
Price on Request |
Carl Walter 560PH-65 |
Carl Walter 560PH-65 Single ended open jaw
spanner 65mm, 800mm in length, 4500g. CW
#10707 |
Price on Request |
Carl Walter 560PH-70 |
Carl Walter 560PH-70Single ended open jaw
spanner 70mm, 850mm in length, 5600g. CW
#10717 |
Price on Request |
Carl Walter 560PH-75 |
Carl Walter 560PH-75 Single ended open jaw
spanner 75mm, 900mm in length, 6700g. CW
#10727 |
Price on Request |
Carl Walter 560PH-80 |
Carl Walter 560PH-80 Single ended open jaw
spanner 80mm, 1000mm in length, 7600g. CW
#10737 |
Price on Request |
Wrenches - Slugging -Allen Bit
-Hex |
||
Carl Walter 630PH Special Order |
![]() ![]() ![]() |
Price on Request |
. |
|
|
Carl Walter Type 520 SG |
![]() |
Request |
Carl Walter 520 SG-24 |
Carl Walter 520 SG-24 Open-Jaw
slugging
wrench,
special steel. DIN 133, 24mm, 180mm long. CW
#09505 |
Request |
Carl Walter 520 SG-27 |
Carl Walter 520 SG-27
Open-Jaw slugging wrench, special steel. DIN 133,
27mm, 180mm long. CW #09515 |
Request |
Carl Walter 520 SG-30 |
Carl Walter 520 SG-30 Open-Jaw slugging wrench, special steel. DIN 133, 30mm, 190mm long. CW # 09525 |
Request |
Carl Walter 520 SG-32 |
Carl Walter 520 SG-32 Open-Jaw
slugging
wrench,
special steel. DIN 133, 32mm, 190mm long. CW
#09535 |
Request |
Carl Walter 520 SG-36 |
Carl Walter 520 SG-36 Open-Jaw
slugging
wrench,
special steel. DIN 133, 36mm, 190mm long. CW
#09545 |
Request |
Carl Walter 520 SG-41 |
Carl Walter 520 SG-41 Open-Jaw
slugging
wrench,
special steel. DIN 133, 41mm, 215mm long. CW
#09555 |
Price on Request |
Carl Walter 520 SG-46 |
Carl Walter 520 SG-46 Open-Jaw
slugging
wrench,
special steel. DIN 133, 46mm, 235mm long. CW
# 09565 |
Price on Request |
Carl Walter 520 SG-50 |
Carl Walter 520 SG-50 Open-Jaw
slugging
wrench,
special steel. DIN 133, 50mm, 255mm long. CW
#09757 |
Price on Request |
Carl Walter 520 SG-55 |
Carl Walter 520 SG-55 Open-Jaw
slugging
wrench,
special steel. DIN 133, 55mm, 300mm long. CW
#09585 |
Price on Request |
Carl Walter 520 SG-60 |
Carl Walter 520 SG-60 Open-Jaw
slugging
wrench,
special steel. DIN 133, 60mm, 375mm long. CW
#09595 |
Price on Request |
Carl Walter 520 SG-65 |
Carl Walter 520 SG-65 Open-Jaw
slugging
wrench,
special steel. DIN 133, 65mm, 410mm long. CW
# 09605 |
Price on Request |
Carl Walter 520 SG-70 |
Carl Walter 520 SG-70 Open-Jaw
slugging
wrench,
special steel. DIN 133, 70mm, 410mm long. CW
#09615 |
Price on Request |
Carl Walter 520 SG-75 |
Carl Walter 520 SG-75 Open-Jaw
slugging
wrench,
special steel. DIN 133, 75mm, 410mm long. CW
#09625 |
Price on Request |
Carl Walter 520 SG-80 |
Carl Walter 520 SG-80 Open-Jaw
slugging
wrench,
special steel. DIN 133, 80mm, 445mm long. CW
#09635 |
Price on Request |
Carl Walter 520 SG-85 |
Carl Walter 520 SG-85 Open-Jaw
slugging
wrench,
special steel. DIN 133, 85mm, 445mm long. CW
#09645 |
Price on Request |
Carl Walter 520 SG-90 |
Carl Walter 520 SG-90 Open-Jaw
slugging
wrench,
special steel. DIN 133, 90mm, 445mm long. CW
#09655 |
Price on Request |
Carl Walter 520 SG-95 |
Carl Walter 520 SG-95 Open-Jaw
slugging
wrench,
special steel. DIN 133, 95mm, 485mm long. CW
#09665 |
Price on Request |
Carl Walter 520 SG-100 |
Carl Walter 520 SG-100 Open-Jaw
slugging
wrench,
special steel. DIN 133, 100mm, 485mm long. CW
#09675 |
Price on Request |
Carl Walter 520 SG-105 |
Carl Walter 520 SG-105 Open-Jaw
slugging
wrench,
special steel. DIN 133, 105mm, 485mm long. CW
#09685 |
Price on Request |
Carl Walter 520 SG-110 |
Carl Walter 520 SG-110 Open-Jaw
slugging
wrench,
special steel. DIN 133, 110mm, 510mm long. CW
#09695 |
Price on Request |
Carl Walter 520 SG-115 |
Carl Walter 520 SG-115 Open-Jaw
slugging
wrench,
special steel. DIN 133, 115mm, 510mm long. CW
#09705 |
Price on Request |
Carl Walter 520 SG-120 |
Carl Walter 520 SG-120 Open-Jaw
slugging
wrench,
special steel. DIN 133, 120mm, 545mm long. CW
#09715 |
Price on Request |
Carl Walter 520 SG-125 |
Carl Walter 520 SG-125 Open-Jaw
slugging
wrench,
special steel. DIN 133, 125mm, 5750mm long.
CW #09725 |
Price on Request |
Carl Walter 520 SG-130 |
Carl Walter 520 SG-130 Open-Jaw
slugging
wrench,
special steel. DIN 133, 130mm, 575mm long. CW
#09735 |
Price on Request |
Carl Walter 520 SG-135 |
Carl Walter 520 SG-135 Open-Jaw
slugging
wrench,
special steel. DIN 133, 135mm, 575mm long. CW
#09745 |
Price on Request |
Carl Walter 520 SG-140 |
Carl Walter 520 SG-140 Open-Jaw
slugging
wrench,
special steel. DIN 133, 140mm, 575mm long. CW
#09755 |
Price on Request |
Carl Walter 520 SG-145 |
Carl Walter 520 SG-145 Open-Jaw
slugging
wrench,
special steel. DIN 133, 145mm, 575mm long. CW
#09765 |
Price on Request |
Carl Walter 520 SG-150 |
Carl Walter 520 SG-150 Open-Jaw
slugging
wrench,
special steel. DIN 133, 150mm, 640mm long. CW
#09775 |
Price on Request |
Carl Walter 520 SG-155 |
Carl Walter 520 SG-155 Open-Jaw
slugging
wrench,
special steel. DIN 133, 155mm, 640mm long. CW
#09785 |
Price on Request |
Carl Walter 520 SG-160 |
Carl Walter 520 SG-160 Open-Jaw
slugging
wrench,
special steel. DIN 133, 160mm, 640mm long. CW
#09795 |
Price on Request |
Carl Walter 520 SG-165 |
Carl Walter 520 SG-165 Open-Jaw
slugging
wrench,
special steel. DIN 133, 165mm, 715mm long. CW
#09805 |
Price on Request |
Carl Walter 520 SG-170 |
Carl Walter 520 SG-170 Open-Jaw
slugging
wrench,
special steel. DIN 133, 170mm, 715mm long. CW
#09815 |
Price on Request |
Carl Walter 520 SG-175 |
Carl Walter 520 SG-175 Open-Jaw
slugging
wrench,
special steel. DIN 133, 175mm, 715mm long. CW
#09825 |
Price on Request |
Carl Walter 520 SG-180 |
Carl Walter 520 SG-180 Open-Jaw
slugging
wrench,
special steel. DIN 133, 180mm, 715mm long. CW
#09835 |
Price on Request |
Carl Walter 520 SG-185 |
Carl Walter 520 SG-185 Open-Jaw
slugging
wrench,
special steel. DIN 133, 185mm, 715mm long. CW
#09845 |
Price on Request |
Carl Walter 520 SG-190 |
Carl Walter 520 SG-190 Open-Jaw
slugging
wrench,
special steel. DIN 133, 190mm, 800mm long. CW
#09855 |
Price on Request |
Carl Walter 520 SG-195 |
Carl Walter 520 SG-195 Open-Jaw
slugging
wrench,
special steel. DIN 133, 195mm, 800mm long. CW
#09865 |
Price on Request |
Carl Walter 520 SG-200 |
Carl Walter 520 SG-200 Open-Jaw
slugging
wrench,
special steel. DIN 133, 200mm, 800mm long. CW
#09875 |
Price on Request |
Carl Walter 520 SG-205 |
Carl Walter 520 SG-205 Open-Jaw
slugging
wrench,
special steel. DIN 133, 205mm, 800mm long. CW
#09885 |
Price on Request |
Carl Walter 520 SG-210 |
Carl Walter 520 SG-210 Open-Jaw
slugging
wrench,
special steel. DIN 133, 210mm, 800mm long. CW
#09895 |
Price on Request |
Carl Walter 520 SG-215 |
Carl Walter 520 SG-215 Open-Jaw
slugging
wrench,
special steel. DIN 133, 215mm, 800mm long. CW
#09905 |
Price on Request |
Carl Walter 520 SG-220 |
Carl Walter 520 SG-220 Open-Jaw
slugging
wrench,
special steel. DIN 133, 220mm, 800mm long. CW
#09915 |
Price on Request |
*********
|
Wrenches - Slugging - Open End - SAE SPECIAL ORDER | |
|||||||||||||||||||||
Carl Walter 520 SG-1 1/16 |
Carl Walter 520 SG-1 1/16 Open-Jaw slugging wrench, special steel. DIN 133, 1 1/16", 180mm long. CW #09516 | Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-1 1/8 |
Carl Walter 520 SG-1 1/8 Open-Jaw
slugging
wrench,
special steel. DIN 133, 1 1/8", 180mm long.
CW #09517 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-1 3/16 |
Carl Walter 520 SG-1 3/16 Open-Jaw
slugging
wrench, special steel. DIN 133, 1 3/16", 190mm long.
CW #09526 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-1 1/4 |
Carl Walter 520 SG-1 1/4 Open-Jaw
slugging
wrench,
special steel. DIN 133, 1 1/4", 190mm long.
CW #09536 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-1 5/16 |
Carl Walter 520 SG-1 5/16 Open-Jaw
slugging
wrench, special steel. DIN 133, 1 5/16", 190mm long.
CW #09537 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-1 3/8 |
Carl Walter 520 SG-1 3/8 Open-Jaw
slugging
wrench,
special steel. DIN 133, 1 3/8", 215mm long.
CW #09546 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-1 7/16 |
Carl Walter 520 SG-1 7/16 Open-Jaw
slugging
wrench, special steel. DIN 133, 1 7/16", 215mm long.
CW #09547 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-1 1/2 |
Carl Walter 520 SG-1 1/2 Open-Jaw
slugging
wrench,
special steel. DIN 133, 1 1/2", 215mm long.
CW #09548 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-1 9/16 |
Carl Walter 520 SG-1 9/16 Open-Jaw
slugging
wrench, special steel. DIN 133, 1 9/16", 235mm long.
CW #09556 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-1 5/8 |
Carl Walter 520 SG-1 5/8 Open-Jaw
slugging
wrench,
special steel. DIN 133, 1 5/8", 235mm long.
CW #09557 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG- 1 11/16 |
Carl Walter 520 SG-1 11/16 Open-Jaw
slugging
wrench, special steel. DIN 133, 1 11/16", 235mm long.
CW #09558 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-1 3/4 |
Carl Walter 520 SG-1 3/4 Open-Jaw
slugging
wrench,
special steel. DIN 133, 1 3/4", 255mm long.
CW #09566 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG- 1 13/16 |
Carl Walter 520 SG-1 13/16 Open-Jaw
slugging
wrench, special steel. DIN 133, 1 13/16", 255mm long.
CW #09567 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-1 7/8 |
Carl Walter 520 SG-1 7/8 Open-Jaw
slugging
wrench,
special steel. DIN 133, 1 7/8", 255mm long.
CW #09568 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-1 15/16 |
Carl Walter 520 SG-1 15/16
Open-Jaw slugging wrench, special steel. DIN
133, 1 15/16", 275mm long. CW #09576 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-2 |
Carl Walter 520 SG-2 Open-Jaw
slugging
wrench,
special steel. DIN 133, 2", 275mm long. CW
#09577 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-2 1/16 |
Carl Walter 520 SG-2 1/16 Open-Jaw
slugging
wrench, special steel. DIN 133, 2 1/16", 275mm long.
CW #09578 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-2 1/8 |
Carl Walter 520 SG-2 1/8 Open-Jaw
slugging
wrench,
special steel. DIN 133, 2 1/8", 300mm long.
CW #09586 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-2 3/16 |
Carl Walter 520 SG-2 3/16 Open-Jaw
slugging
wrench, special steel. DIN 133, 2 3/16", 300mm long.
CW #09587 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-2 1/4 |
Carl Walter 520 SG-2 1/4 Open-Jaw
slugging
wrench,
special steel. DIN 133, 2 1/4", 300mm long.
CW #09588 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-2 5/16 |
Carl Walter 520 SG-2 5/16 Open-Jaw
slugging
wrench, special steel. DIN 133, 2 5/16", 320mm long.
CW #09596 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-2 3/8 |
Carl Walter 520 SG-2 3/8 Open-Jaw
slugging
wrench,
special steel. DIN 133, 2 3/8", 320mm long.
CW #09597 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-2 7/16 |
Carl Walter 520 SG-2 7/16 Open-Jaw
slugging
wrench, special steel. DIN 133, 2 7/16", 320mm long.
CW #09598 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-2 1/2 |
Carl Walter 520 SG-2 1/2 Open-Jaw
slugging
wrench,
special steel. DIN 133, 2 1/2", 340mm long.
CW #09606 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-2 9/16 |
Carl Walter 520 SG-2 9/16 Open-Jaw
slugging
wrench, special steel. DIN 133, 2 9/16", 340mm long.
CW #09607 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-2 5/8 |
Carl Walter 520 SG-2 5/8 Open-Jaw
slugging
wrench,
special steel. DIN 133, 2 5/8", 340mm long.
CW #09608 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-2 3/4 |
Carl Walter 520 SG-2 3/4 Open-Jaw
slugging
wrench,
special steel. DIN 133, 2 3/4", 375mm long.
CW #09616 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG- 2 13/16 |
Carl Walter 520 SG-2 13/16 Open-Jaw
slugging
wrench, special steel. DIN 133, 2 13/16", 375mm long.
CW #09617 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-2 7/8 |
Carl Walter 520 SG-2 7/8 Open-Jaw
slugging
wrench,
special steel. DIN 133, 2 7/8", 375mm long.
CW #09618 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-2 15/16 |
Carl Walter 520 SG- 2 15/16
Open-Jaw slugging wrench, special steel. DIN
133, 2 15/16", 375mm long. CW #09626 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-3 |
Carl Walter 520 SG-3 Open-Jaw
slugging
wrench,
special steel. DIN 133, 3", 375mm long. CW
#09627 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-3 1/8 |
Carl Walter 520 SG-3 1/8 Open-Jaw
slugging
wrench,
special steel. DIN 133, 3 1/8", 410mm long.
CW #09636 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-3 1/4 |
Carl Walter 520 SG-3 1/4 Open-Jaw
slugging
wrench,
special steel. DIN 133, 3 1/4", 410mm long.
CW #09637 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-3 3/8 |
Carl Walter 520 SG-3 3/8 Open-Jaw
slugging
wrench,
special steel. DIN 133, 3 3/8", 410mm long.
CW #09646 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-3 1/2 |
Carl Walter 520 SG-3 1/2 Open-Jaw
slugging
wrench,
special steel. DIN 133, 3 1/2", 445mm long.
CW # 09656 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-3 5/8 |
Carl Walter 520 SG-3 5/8 Open-Jaw
slugging
wrench,
special steel. DIN 133, 3 5/8", 445mm long.
CW #09657 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-3 3/4 |
Carl Walter 520 SG-3 3/4 Open-Jaw
slugging
wrench,
special steel. DIN 133, 3 3/4", 445mm long.
CW #09666 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-3 7/8 |
Carl Walter 520 SG-3 7/8 Open-Jaw
slugging
wrench,
special steel. DIN 133, 3 7/8", 485mm long.
CW #09676 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-4 |
Carl Walter 520 SG-4 Open-Jaw
slugging
wrench,
special steel. DIN 133, 4", 485mm long. CW
#09677 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-4 1/8 |
Carl Walter 520 SG-4 1/8 Open-Jaw
slugging
wrench,
special steel. DIN 133, 4 1/8", 485mm long.
CW #09686 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-4 1/4 |
Carl Walter 520 SG-4 1/4 Open-Jaw
slugging
wrench,
special steel. DIN 133, 4 1/4", 510mm long.
CW #09696 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-4 1/2 |
Carl Walter 520 SG-4 1/2 Open-Jaw
slugging
wrench,
special steel. DIN 133, 4 1/2", 510mm long.
CW #09706 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-4 3/4 |
Carl Walter 520 SG-4 3/4 Open-Jaw
slugging
wrench,
special steel. DIN 133, 4 3/4", 545mm long.
CW #09716 |
Price on Request | |||||||||||||||||||||
Carl Walter 520 SG-5 |
Carl Walter 520 SG-5 Open-Jaw
slugging
wrench,
special steel. DIN 133, 5", 255mm long. CW
#09726 |
Price on Request | |||||||||||||||||||||
. |
|
. | |||||||||||||||||||||
Carl Walter 540PH |
Carl Walter 540PH Open Jaw
slugging wrench, hammer forged for highest
requirements. Available with 15 degree, 45 degree,
or 90 degree angle. Available size 41mm-120mm. **Special Order Only.
![]() To see available
sizes.
[ 15 degree - click here ] [ 45 degree - click here ] [ 90 degree - click here ] |
on Request |
|||||||||||||||||||||
Carl Walter 10427 |
Carl Walter 540PH -60 Open
Jaw slugging wrench, 60mm with 90 degree angle.
Length 250mm.![]() |
Price on Request |
|||||||||||||||||||||
. |
|
. | |||||||||||||||||||||
Carl Walter 480PH |
Carl Walter 480PH Slugging
Ring Spanner, EXTRA Strong. DIN 7168B. Available
size 19mm to 120mm. **Special Order Only. ( More Information ) ![]() ![]() |
Price on Request |
|||||||||||||||||||||
Type 580SG Slugging Ring
Wrench. Available 24-230mm and 1-1/16" to 5". **Special Order Only.![]() |
|||||||||||||||||||||||
Type
580SG Metric Sizes |
|
Price on Request |
|||||||||||||||||||||
Type
580SG Inch Sizes |
|
Price on Request |
|||||||||||||||||||||
Wrench, Slugging Ring - Extra Quality |
|||||||||||||||||||||||
Type
620PH |
Carl Walter Type 620PH
Slugging ring wrenches. Available in sizes
from 30mm to 120mm.
|
Price on Request |
|||||||||||||||||||||
. |
|
. | |||||||||||||||||||||
Carl Walter 640PH |
Carl Walter 640PH Compact
Slugging Ring Wrench. Available in size 27, 30, 32,
36, 41, 46, 50, 55, 60mm. **Special Order Only. ![]() |
||||||||||||||||||||||
Carl Walter 640 PH 27 |
Carl Walter 640
PH
27 Compact Slugging Ring Wrench. 27mm. 12
point. Outside Diameter 52mm. Thickness 25mm **Special Order Only.
Order Code: 006400270040 |
Price on Request |
|||||||||||||||||||||
Carl Walter 640 PH 30 |
Carl Walter 640
PH
30 Compact Slugging Ring Wrench. 30mm. 12
point. Outside Diameter 54mm. Thickness 27mm. |
$213.86 |
|||||||||||||||||||||
Carl Walter 640 PH 32 |
Carl Walter
640 PH 32 Compact Slugging Ring Wrench.
32mm. 12 point. Outside Diameter 56mm. Thickness
27mm **Special Order
Only. Order Code: 006400320040 |
Price on Request |
|||||||||||||||||||||
Carl Walter 640 PH 36 |
Carl Walter 640 PH 36 Compact Slugging Ring Wrench. 36mm. 12 point. Outside Diameter 62mm. Thickness 30mm **Special Order Only. Order Code: 006400360040 | Price on Request |
|||||||||||||||||||||
Carl Walter 640 PH 41 |
Carl Walter 640 PH 41 Compact Slugging Ring Wrench. 41mm. 12 point. Outside Diameter 68mm. Thickness 33mm **Special Order Only. Order Code: 006400410040 | Price on Request |
|||||||||||||||||||||
Carl Walter 640 PH 46 |
Carl Walter 640 PH 46 Compact Slugging Ring Wrench. 46mm. 12 point. Outside Diameter 78mm. Thickness 35mm **Special Order Only. Order Code: 006400460040 | Price on Request |
|||||||||||||||||||||
Carl Walter 640 PH 50 |
Carl Walter 640 PH 50 Compact Slugging Ring Wrench. 50mm. 12 point. Outside Diameter 82mm. Thickness 38mm **Special Order Only. Order Code: 006400500040 | Price on Request |
|||||||||||||||||||||
Carl Walter 640 PH 55 |
Carl Walter 640 PH 55 Compact Slugging Ring Wrench. 55mm. 12 point. Outside Diameter 90mm. Thickness 40mm **Special Order Only. Order Code: 006400550040 | Price on Request |
|||||||||||||||||||||
Carl Walter 640 PH 60 |
Carl Walter 640
PH
60 Compact Slugging Ring Wrench. 60mm. 12
point. Outside Diameter 98mm. Thickness 40mm **Special Order Only.
Order Code: 006400600040 |
Price on Request |
. |
|
. |
Carl Walter 2373 |
Carl Walter Type 2373
Torque Wrench Open Ring Ratchet. Available in size 8, 9,
10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm with
9x12 mounting. Available in size 17, 18, 19, 20, 21,
22 and 24mm with 14x18 mounting. Special Order
Only!! |
Price On Request |
Carl Walter 2377/1 |
Carl Walter 2377/1 Torque
wrench insert, 1/4" fixed square drive, 9x12
mounting. With inter-changeable square. CW #80301 |
|
Carl Walter 2377/2 |
Carl Walter 2377/2 Torque
wrench insert, 3/8" fixed square drive, 9x12
mounting. With inter-changeable square. CW #80311 |
|
Carl Walter 2377/3 |
Carl Walter 2377/3 Torque
wrench insert, 1/2" fixed square drive, 9x12
mounting. With inter-changeable square. CW #80321 ![]() |
|
Carl Walter 2378/3 |
Carl Walter 2378/3 Torque
wrench replaceable insert with 1/2" square drive.
14x18 mounting. CW #80371 ![]() |
$92.03
|
Carl Walter 2379 |
Carl Walter 2379 Torque
Wrench Bit Holder. Available: Article Number 2379/0 with 9x12 mounting 14" Bit Holder (6.3mm) Article Number 2379/1 with 9x12 mounting 5/16" Bit Holder (8mm) Article Number 2379/2 with 14x18 mounting 5/16" Bit Holder (8mm) **Special Order Only!! |
Price On Request |
★ | ||
Carl Walter 2390/LF85 |
Carl Walter
2390LF/85 Torque Wrench with fixed setting for
production line work. Signal type. Range 15-85Nm.
With 9x12mm head mounting. Head not included.
Accuracy +/-4% without scale. The setting must be
set on a torque tester using the special 290ESN
wrench shown below. **Special
Order Only! |
Price On Request (Picture) |
Carl Walter 2390ESN |
Carl Walter 2390ESN Adjusting
wrench
used to adjust torque on LF Torque Wrenches. Black
grip-handle with hanging hole. 142mm in length.
CW #80092 Limited
Quantity
![]() |
SALE!
$49.99 $81.49 |
Carl Walter 2391 TQW |
Torque Wrench
type Torquik W. Basic number 2391 TQW.
Available Range 10Nm-300Nm. 8ft.lbs - 220
ft.lbs.
|
Price on Request |
Carl Walter 2601 |
Carl Walter
2601 Torque angle gauge. Disc
type to be used with a torque wrench. Has working
range of 0-360º and is 450mm in length. 1/2" drive.
Super-strong magnetic. Flexible Arm. Order
Code: 026018122000. No
Longer Available. |
|
Carl Walter 2715 |
Carl Walter 2715 Torque
Wrench. **Special
Order Only.
![]() |
on |
Carl Walter 2926-36 Custom 1312291848 |
Carl Walter custom made
2926-36 Torque Wrench Insert Offset 36mm. Mounting
size H8500 Cylindric connector. Special Order code
1312291848 |
Price on Request |
Carl Walter 2934 - PH |
Carl Walter 2934
Pipe Head for Torque Wrenches with a cylindrical
connector. This pipe head comes in 5 different sizes.
H 900 and H 1800 with a 13-38mm diameter. The H 2800
comes in 13-38mm and 26-52mm diameter. H 8500 has a
26-52mm diameter.![]() |
on (Picture) |
Carl Walter 2934 - FH |
Carl Walter 2934
Hook Head for Torque Wrenches with a cylindrical
connector. This hook head comes in 8 different sizes.
H 900 -- 30mm; 38mm; 45mm; 52mm; 58mm. H 1800 -- 65mm.
H 2800 -- 75mm and a 85mm. |
on |
★ | ||
Carl Walter 2934 - HH |
Carl Walter 2934
Hex Head for Torque Wrenches with a cylindrical
connector. This hex head comes in 20 different sizes.
H 255--5mm; H 226--6mm; H 227--8mm; H 450--5, 6, 8 and
10mm; H 900--8, 10, 12 and 14mm; H 1800--10, 12,
14 and 17mm; H 2800--12, 104, 127, 19 and 22mm. |
on |
![]() ![]() ![]() |
HOME | Quick Search | SEARCH | email Samstag |
|
Copyright © 1997-2025
Samstag Sales