Samstag Sales KUKKO Tools Authorized Distributor
USA (615)-735-3388

 KUKKO Tools from Samstag Sales

 
KUKKO Tools Gear Pullers 

KUKKO TURNUS Logo

KUKKO Tools Gemany Sample Tools

KUKKO is a German manufacturer of pulling tools. Samstag Sales is an Authorized Distributor of Kukko tools. KUKKO has a complete line of gear pullers and bearing extractors. The TURNUS division has a good selection of hand tools with an extensive selection of clamps, tin snips, and other cutting tools. If not in stock, Samstag Sales can special order any of these tools for you. Please email for stock status and a quote on any KUKKO or TURNUS tool.
Last Kukko Update: November 8, 2019

HOME Quick Search SEARCH
email Samstag
How To Order
Web Special
Please Note: Our shopping cart is available for your convenience. The shipping is a flat rate calculated by value. Contact us for more shipping options. (Click for Shipping Rates & Info)
.

Quick Search
Quick
 Search
Advertising Hand Vice
Authorized Distributor Hydraulic
Automotive Tools Inductive Heater
Ball Bearing Extractors Internal Bearing Pullers
Ball Bearing Extractor - "PULLPO" Internal Bearing Puller- Sets
Ball Bearing Inductive Heater Internal Bearing Puller - Counterstay
Ball Joint

Bar Clamps Internal Bearing Puller - Segment Type
Bearing Install Set Key Lifter
Bearing Race Puller Needle Bearing Extract  - SALE!
Bearing Separators NON-Sparking Tools
Bearing Separator - Pulling Device Nut Splitter
Bearing Separator - Sets Other Tools
Bearing Separator  - Puller with Side Clamp Picks & Hooks
Brake Tools Pressure Screw
C-Clamps Pulling Device
Catalog - FREE Scissors
Counterstay Screw Clamps
Cylinder Liner Puller Seal Install Set
Dowel Pin Extractor Sets - Wall Mount
Gear Pullers - Basic - Spare Arms Slide Hammer
Gear Pullers - Basic Spare Arms - Gear Pullers
Gear Pullers - Basic with Side Clamp Spare Arms - Gear Pullers - Confined Space
Gear Puller - Hydraulic- 2 Arm

Gear Puller - Quick Adjust - 2 Arm Spare Arms - Gear Pullers - Standard
Gear Puller - Quick Adjust - 2 Arm - Slender Spare Pressure Screw
Gear Puller - Quick Adjust - 3 Arm Steel Stampling Letters - SALE!
Gear Puller - Quick Adjust - 2+3 Arm - Slender SETS Steel Stamping Numbers
Gear Puller - Quick Adjust - 3 Arm - Slender Steel Stencils
Gear Puller - Self Centering - 2 or 3 Arm Stud Extractors - SALE!
Gear Puller - Swiveling Jaw - 3 Arm Thread Restore Tool
Grease Web Special -KUKKO
Search Tip: an easy way to search this web page is to use the "Find in Page" feature built into your browser. A fast way to open the search box is to hold down your (CTRL) key and type the letter "Fon Windows.  Or  +"F" keys on a Mac.

.
  Web Special!

KUKKO 128-2 Ball joint tool tie rod puller. Kukko 128/2. Fork 23mm.
Working Height 48mm. Same as Mercedes tool 000 589 44 33 00

  

Buy this tool now for the special price of $76.80 $49.99
10.22.19
.
.
Part_No
Description
Price

Advertising

Download the
KUKKO
Catalog or Spare Parts List!
{Click on the image to start a download}
KUKKO Catalog Download           KUKKO Spare Parts Catalog Download
FREE

KUKKO
Brekina
VW Tool Van
Miniature Brekina KUKKO VW Tool Van. This is a small Brekina toy.  It looks like a Type 2 VW Panel Van. About 1-3/4" Long. It features the KUKKO  colors and KUKKO name.  No Longer Available from KUKKO.

$39.00



___________
Automotive Tools
********
31-1 KUKKO 31-1 Steering wheel puller. Mercedes Style. For 30-60mm (1-1/4 to 2-3/8") column diameter. With 5 interchangeable insert rings.
102-1 KUKKO 102-1 Piston Pin driver. Pistons 40-100mm. Includes 3 supplementary pressure pads. 


245-004 KUKKO 245-004 "Turnus" Jet reamer Set. This set contains 12 tapered reamers and a sturdy steel handle. Siizes included are .6mm, .65mm, .7mm, .75mm, .8mm, .9mm, 1.0mm, 1.1mm, 1.3mm, 1.5mm, 1.7mm, 1.9mm. A sturdy steel handle is included.. Since these tools are used by hand the results depend on the skill of the user. Good for carburetor work or use on other small jets. A nice plastic storage tube is included.
 



229-2
229-3
Hydraulic Hub Puller. For pulling all 4 and 5 hole hubs on almost all passenger cars. More Info.

229-2
$445.00

229-3
$592.80
_


230 Flange Type Slide Hammer Axle Puller. For bolts up to 14mm.  Bolt spacing 100-150mm. Hammer weight 3.8Kg Length 265mm.

$244.80



___________
Ball Bearing Extractors
.
Type 70 Series
Kukko 70 Series Deep-Groove ball bearing extactors that are used for quick and easy removal of ball bearings mounted on shafts in housings. Parts sold separately! You will need the basic extractor and a set of arms. See the sections below.

PLEASE NOTE: This series of tools will only work on bearings made to German specifications! Please check your bearing before buying this tool.
 
For ball bearings: types 600-2021 * types 6200-6222
                                types 6300-6317 * types 6403-6415


.




Ball Bearing Extractors - Series 70 Basic Tool

70-1 KUKKO 70-1 Extractor. Sold without arms. Suitable sets of arms for this item: 70-711, 70-712, 70-713 (see below)
$68.70
70-2 KUKKO 70-2 Extractor. Sold without arms. Suitable sets of arms for this item: 70-721+70-722 (see below)


$103.20
70-3 KUKKO 70-3 Extractor. Sold without arms. Suitable sets of arms for this item: 70-731+ 70-732 (see below)
$206.40
70-4 KUKKO 70-4 Extractor. Sold without arms. Suitable sets of arms for this item: 70-4730 + 70-4731, 70-4733 + 70-4734 (see below)
$430.60

________
Ball Bearing Extractors -  Series 70 Arms

Type 70 Arms KUKKO type 70 Pulling Arms for extractors, in sets of 4 each. Spacer rings included with select sets of arms.
PLEASE NOTE: This series of tools will only work on bearings made to German specifications! Please check your bearing before buying this tool.
.
70-711 KUKKO 70-711 Set of 4 Arms, 150mm in length each. No spacer rings. Good for bearing sizes 6000, 6001, 6002, 6003, 6200. Use with extractor 70-1.
$137.80
70-1 & 70-711 Set KUKKO 70-1 Extractor, with KUKKO 70-711 Set of 4 Arms, 150mm in length each. No spacer rings. Good for bearing sizes 6000, 6001, 6002, 6003, 6200.

Kukko 70-1 & 70-711 Extractor Set
$206.50
70-712 KUKKO 70-712 Set of 4 arms, 150mm in length each. 6 spacer rings, Good for bearings sizes 6004, 6005, 6006, 6201, 6202, 6203, 6300. Use with extractor 70-1. $155.10
70-713 KUKKO 70-713 Set of 4 arms, 170mm in length each, 5 spacer rings, Good for bearing sizes: 6204, 6205, 6301, 6302, 6303. Use with extractor 70-1. $155.10
70-721 KUKKO 70-721 Set of 4 arms, 180mm, in length each, 1 spacer ring, good for bearing sizes: 6007, 6008, 6009, 6010, 6013. Use with extractor 70-2. $155.10
70-722 KUKKO 70-722 Set of 4 arms, 180mm in length each, 4 spacer rings good for bearing sizes: 6011, 6012, 6206, 6207, 6304, 6306. Use with extractor 70-2.
$155.10
70-2 & 70-722 Set Kukko 70-2 Extractor with Kukko 70-722 Set of 4 arms, 180mm in length each, 4 spacer rings good for bearing sizes: 6011, 6012, 6206, 6207, 6304, 6306.

$258.30
70-731 KUKKO 70-731 Set of 4 arms, 217mm in length each, 6 spacer rings, good for bearing sizes: 6208, 6209, 6210, 6307, 6403, 6407. Use with extractor 70-3. $241.00
70-732 KUKKO 70-732 Set of 4 arms, 217mm in length each, 9 spacer rings, good for bearing sizes: 6211, 6212, 6308, 6309, 6310, 6311, 6404, 6405, 6406, 6408. Use with extractor 70-3.  $241.00
70-4730 KUKKO 70-4730 Set of 4 arms, 217mm in length each, 4 spacer rings, good for bearing sizes: 6014, 6015, 6016, 6017. Use with extractor 70-4. $602.90
70-4731 KUKKO 70-4731 Set of 4 arms, 217mm in length each, 6 spacer rings, good for bearing sizes: 6019, 6020, 6214, 6215. Use with extractor 70-4. $702.80
70-4734 KUKKO 70-4734 Set of 4 arms, 290mm in length each, 1 spacer ring. good for bearing sizes: 6021, 6409. Use with extractor 70-4. $309.60
70-4733 KUKKO 70-4733 Set of 4 arms, 290mm in length each. 19 spacer rings, good for bearing sizes: 6216-6222, 6312-6317, 6410-6415. Use with extractor 70-4.
$1,550.40





Inductive Heater - Ball Bearing


Kukko Ball Bearing Inductive Heater
MORE
INFO
T-AW-20
Internal Bearing size 20, 35, 60mm for Mobile Service.
$4646.40
T-AW-40
Internal Bearing size 15, 20, 35, 60, 70mm for Workshop.
$7234.10





Ball Bearing Puller - "PULLPO" the Octopus of Pullers.


KUKKO the Octopus of Pullers
K-70-A "PULLPO" Ball bearing puller set. Self tensioning with mechanical pressure screw. For inside bearing diameter of 3/8" - 1-3/16" inch (10-30mm). For bearing numbers 6000-6006, 6200-6205, 6300-6304. For a slide hammer to use with this set, see  KUKKO 22-0-1 hammer
   KUKKO PULLPO Ball Bearing Puller SEt

$768.00
K-70-B
"PULLPO" Ball bearing puller set. Self tensioning with mechanical pressure screw. For inside bearing diameter of 5/8"- 3-7/8" inch (17-100mm). For bearing numbers 6007-6020, 6206-6212, 6305-6311, 6403-6408. $1,104.00
K-70-C
"PULLPO" Ball bearing puller set. Self tensioning with mechanical pressure screw. For inside bearing diameter of 3/8" - 3-7/8" inch (10-100mm). For bearing numbers 6000-6020, 6200-6212, 6300-6311, 6403-6408. $1,728.00
70-01
"PULLPO" Ball bearing puller. Special cross-beam design allows spread adjustment of the pulling jaws. Mechanical pressure spindle. Used with 70-011 and 70-012.
$158.40
70-02
"PULLPO" Ball bearing puller. Special cross-beam design allows spread adjustment of the pulling jaws. Mechanical pressure spindle. Used with 70-021 and 70-022.
$192.00
70-011
Pulling hook set. The proven KUKKO claw in a newly developed, modern jaw design. Pulling jaws developed for precise mounting in bearing tracks for optimal support and better extension force. Pulling jaws are made of two parts, dowel pin is hammered into the upper end of the jaw. For bearing numbers 6000-6004, 6200-6202, 6301.
$292.80
70-012
Pulling hook set. The proven KUKKO claw in a newly developed, modern jaw design. Pulling jaws developed for precise mounting in bearing tracks for optimal support and better extension force. Pulling jaws are made of two parts, dowel pin is hammered into the upper end of the jaw. For bearing numbers 6005-6006, 6203-6205, 6300, 6302-6304.
$326.40
70-021
Pulling hook set. The proven KUKKO claw in a newly developed, modern jaw design. Pulling jaws developed for precise mounting in bearing tracks for optimal support and better extension force. Pulling jaws are made of two parts, dowel pin is hammered into the upper end of the jaw. For bearing numbers 6007-6013, 6206, 6210, 6211, 6306, 6307.
$576.00
70-022
Pulling hook set. The proven KUKKO claw in a newly developed, modern jaw design. Pulling jaws developed for precise mounting in bearing tracks for optimal support and better extension force. Pulling jaws are made of two parts, dowel pin is hammered into the upper end of the jaw. For bearing numbers 6014-6020, 6207-6209, 6212, 6305, 6308-6311, 6403-6408.
$600.00


*******************
Ball Joint Tools

127-2
Kukko 127-2 Ball joint extractor, working width 33mm, height 58mm. For Porsche Cayenne older than March 2010; VW Touareg 2003>; Seat Ibiza 2008>; Seat Leon 2013>
$89.80
127-3 Kukko 127-3 Ball joint extractor, working width 34mm, height 63mm. For VW Touareg, Bj. 2003-2009; Mercedes Sprinter; VW-LT 1998; Fiat Ducato 1994
$93.60
127-4 Kukko 127-4 Ball joint extractor, working width 37mm, height 58mm. For VW Touareg, ab Bj. 2010; Audi Q7 ab Bj. 2007
$116.70
128-1 Kukko 128-1 Ball joint extractor, working width 18mm, height 38mm. $56.20
128-2 KUKKO 128-2 Ball joint tool tie rod puller. Fork width 23mm. Working Height 48mm. Same as Mercedes tool 000 589 44 33 00

   
$76.80
(Picture)
128-3 Kukko 128-3 Ball joint extractor, working width 29mm, height 60mm. $102.30
128-4 Kukko 128-4 Ball joint extractor, working width 40mm, height 106mm. $130.10
128-5 Kukko 128-5 Ball joint extractor, working width 50mm, height 106mm. $200.20
128-G-3
Kukko 128-G-3 Ball joint extractor, working width 30mm, material thickness 6.5mm. $581.30
128-G-4 Kukko 128-G-4 Ball joint extractor, working width 39mm, material thickness 8mm. $932.70
128-G-6
H15
Hydraulic bell-shaped drop arm puller. 58mm.  Max 15 Ton. Note:  More Information.


$1322.00
More
Info
129-0 KUKKO 129-0 Adjustable ball joint extractor. 20mm fork. 2 stage opening to 50mm.

 
$146.00
(Picture)
129-0-25 KUKKO 129-0-25 Adjustable ball joint extractor. 25mm fork. 2 stage opening to 50mm. For VAG, Universal, Kleinere Modelle
$146.00
129-0-29 KUKKO 129-0-29 Adjustable ball joint extractor. 29.5mm fork. 2 stage opening to 50mm. For Polo (02); Golf (04/05); Caddy; A 2 (01); A 6 (98); A 8 (94); Passat (06); TT (99); Touran (04); LY (97)
$146.00
129-0
DC-1
KUKKO 129-0-DC-1 Adjustable ball joint extractor. 20mm fork. 2 stage opening to 50mm. For Mercedes C & E
$172.80
129-0
DC-2
KUKKO 129-0-DC-2 Adjustable ball joint extractor. 20mm fork. 2 stage opening to 50mm. For Smart
$162.80
129-1 KUKKO 129-1 Adjustable ball joint extractor. 18-22mm fork. 50mm opening quick and simple action.

$113.30
(Picture)
129-1
B-1
KUKKO 129-1-B-1 Adjustable ball joint extractor. 30mm fork. 50mm opening quick and simple action. For BMW
$142.60
129-2 KUKKO 129-2 Adjustable Triple Jaw ball joint extractor. Jaw width sizes 16mm, 22mm, 32mm. Opening to 70mm
$141.20
129-3-A KUKKO 129-3-A Adjustable ball joint extractor. Working width 30mm, opening to 65mm. For ALU
$173.30
129-3-A-32 KUKKO 129-3-A-32 Adjustable ball joint extractor. Working width 32mm, opening to 65mm. For ALU-Fahrwerke, A 8 ab 03 (hinten)
$173.30
129-3-A-34 KUKKO 129-3-A-34 Adjustable ball joint extractor. Working width 34mm, opening to 65mm. For ALU-Fahrwerke, A 8 ab 03 (vorne)
$173.30
129-3 KUKKO 129-3 Adjustable ball joint extractor, lever type. Working width 31mm, opening to 70mm. Universal for medium sized trucks, busses and construction vehicles.


$190.10
129-3-H Kukko 129-3-H Adjustable Ball Joint Extractor with hydraulic spindle. Working width 31mm, opening to 70mm. Max force 10 tons
$375.40
129-4 KUKKO 129-4 Adjustable ball joint extractor, lever type. Working width 40mm, opening to 85mm. Universal for large sized trucks, busses and construction vehicles. $202.60
129-4-H Kukko 129-4-H Adjustable Ball Joint Extractor with hydraulic spindle. Working width 40mm, opening to 85mm. Max force 15 tons $553.00
129-5 Kukko 129-3-H Adjustable Ball Joint Extractor for heavy trucks. Working width 36mm, opening to 70mm.
$368.70
129-5-H Kukko 129-3-H Adjustable Ball Joint Extractor with hydraulic ram, for heavy trucks. Working width 36mm, opening to 70mm.
Max force 15 tons
$720.50
129-5-45 Kukko 129-5-45 Tie and Connection Rod Joint Puller for heavy trucks. Working width 35-45mm, opening to 120mm.
$459.90
129-5-50 Kukko 129-5-45 Tie and Connection Rod Joint Puller for heavy trucks. Working width 50mm, opening to 120mm. $514.60
129-5-45
H10
Kukko 129-5-45-H10 Tie and Connection Rod Joint Puller with hydraulic lift cylinder. Working width 35-45mm, opening to 120mm. Max Force 10 Tons.
See YHP-326 Set needed to operate puller.
$927.90
129-5-45
H20
Kukko 129-5-45-H20 Tie and Connection Rod Joint Puller with hydraulic lift cylinder. Working width 35-45mm, opening to 120mm. Max Force 20 Tons
See YHP-326 Set needed to operate puller.
$1,063.20
129-5-50
H10
Kukko 129-5-50-H10 Tie and Connection Rod Joint Puller with hydraulic lift cylinder. Working width 50mm, opening to 120mm. Max Force 10 Tons
See YHP-326 Set needed to operate puller.
$981.20
129-5-50
H20
Kukko 129-5-50-H20 Tie and Connection Rod Joint Puller with hydraulic lift cylinder. Working width 50mm, opening to 120mm. Max Force 20 Tons
See YHP-326 Set needed to operate puller.
$1,116.50
129-6 Kukko 129-6 Ball Joint Extractor for trucks. Removable jaw with sizes 24mm, 32mm, 47mm.
$1,217.30
129-36-H
Kukko 129-36-H Tie and Connecting Rod Joint Puller with Hydraulic Lift Cylinder. Working width 36mm, opening to 60mm. Max Force 10 Tons.
See YHP-326 Set needed to operate puller.
$1,300.80
135-1 Kukko 135-1 Fork Separators for ball joints. Fork width 18mm.
$59.60
135-2 Kukko 135-2 Fork Separators for ball joints. Fork width 23mm. $59.60
135-3 Kukko 135-3 Fork Separators for ball joints. Fork width 29mm. $59.60
135-4 Kukko 135-4 Fork Separators for ball joints. Fork width 39mm. $59.60
135-5 Kukko 135-5 Fork Separators for ball joints. Fork width 45mm. $59.60





Bearing Install Set

71 KUKKO 71 Bearing Fitting Tool Kit made of heavy duty steel. 33 impact rings made of extra strong steel, 5 strike pipes made of extra strong steel, and 1 dead blow hammer. Internal bearing size 3/8" - 2". Strike pipe internal diameter sizes: 19/32", 25/32", 1-3/16", 1-9/16", 2-5/32". All strike pipes are 8-7/8" tall.
$1,969.50
71-L
KUKKO 71-L Bearing Install Set , Fitting Tool Kit. Light Weight set for Field Service. For quick, precise and secure installation of bearings and seals. With 33 impact rings of shockproof plastic, 3 striking pipes, and 1 Dead Blow Hammer. For inside bearing size 10-50mm (3/8" - 2" inch).  Outside size 26-110mm (1-1/32"-4-3/8" inch).
Weight 6.34Kg (14 pounds). Special Order. Delivery estimated 7-10 days.

$760.40



.
Bearing Separators
.
15-0 KUKKO 15-0 Bearing Separator. Jaw opening is 5mm-60mm width is 60mm. The 15-0 bearing separator is combinable with the 18-0.

15-1
KUKKO 15-1 Bearing Separator. Jaw opening is 12mm-75mm width is 75mm. The 15-1 bearing separator is combinable with 18-1

$118.10

15-2
KUKKO 15-2 Bearing Separator. Jaw opening is 22mm-115mm width is 115mm. The 15-2 bearing separator is combinable with the 18-2, 18-2-B. 

$181.00

15-3
KUKKO 15-3 Bearing Separator. Jaw opening is 25mm-155mm width is 155mm. The 15-3 bearing separator is combinable with the 18-3, 18-3-B. (Note: See also set 15-C)  

$293.80

15-4
KUKKO 15-4 Bearing Separator. Jaw opening is 30mm-200mm width is 200mm. The 15-4 bearing separator is combinable with the 18-4, 18-4-B.

$843.90

15-5 KUKKO 15-5 Bearing Separator. Jaw opening is 30mm-250mm width is 250mm. The 15-5 bearing separator is combinable with the 18-5, 18-5-B.
$1,202.40
17-0 KUKKO 17-0 Bearing Separator with quick action pressure screw. Jaw opening is 5mm-60mm width 60mm. The 17-0 bearing separator is combinable with 18-0.
17-1 KUKKO 17-1 Bearing Separator with quick action pressure screw. Jaw opening is 12mm-75mm width 75mm. The 17-1 bearing separator is combinable with the 18-1.
17-2 KUKKO 17-2 Bearing Separator with quick action pressure screw. Jaw opening is 22mm-115mm width 115mm. The 17-2 bearing separator is combinable with the 18-2.
17-3 KUKKO 17-3 Bearing Separator with quick action pressure screw. Jaw opening is 25mm-155mm width 155mm. The 17-3 bearing separator is combinable with the 18-3. ***Special Order Only
$414.80


Bearing Separator - Pulling Device

18-0 KUKKO 18-0 Pulling Device that is combinable with the 15-0, 17-0 bearing separators. Jaw opening 50mm-110mm height 71mm-150mm bolt size 13mm.
18-1 KUKKO 18-1 Pulling Device that is combinable with the 15-1, 17-1 bearing separators. Jaw opening 60mm-150mm height 122mm-200mm bolt size 19mm. 
18-2 KUKKO 18-2 Pulling Device that is combinable with the 15-2, 17-2 bearing separators. Jaw opening 60mm-200mm height 125mm-250mm bolt size 22mm.

18-3

KUKKO 18-3 Pulling Device that is combinable with the 15-3, 17-3 bearing separators. Jaw opening 80mm-300mm height 144mm-300mm bolt size 27mm. (Note: See also set 15-C) . 

$343.20
18-4 KUKKO 18-4 Pulling Device that is combinable with the 15-4 bearing separator. Jaw opening 120mm-380mm height 134mm-350mm bolt size 36mm.
$807.90
18-5 KUKKO 18-5 Pulling Device that is combinable with the 15-5 bearing separator. Jaw opening 150mm-440mm height 225mm-400mm bolt size 41mm.
$1,222.10
Type
18-AS
Screw Adapters

See Sets
Below
18-0-AS
Kukko 18-0-AS Set of screw adapters. Set includes 6 pins. Thread sizes ( M4-M5-M6-M8-M10-M12 ) Will fit 18-0 or 18-1 Pulling Device. With parts:
VM10-10
Double Femal Adapter M10/M10
GE4-10
Treaded Adapter M4/M10
GE5-10
Treaded Adapter M5/M10
GE6-10
Treaded Adapter M6/M10
GE8-10
Treaded Adapter M8/M10
GE10-10
Treaded Adapter M10/M10
GE12-10
Treaded Adapter M12/M10
$152.20
18-2-AS
Kukko 18-2-AS Set of screw adapters. Set includes 6 pins. Thread sizes ( M8-M10-M12-M14-M16-M18 ) Will fit 18-2 Pulling Device.
$235.20
18-3-AS Kukko 18-3-AS Set of screw adapters. Set includes 6 pins. Thread sizes ( M14-M16-M18-M20-M22-M24 ) Will fit 18-3 Pulling Device.
$331.20
204-0 KUKKO 204-0 Bearing Puller 2-Arm with sepearating claw and side clamp. 50mm wide x 70mm reach. $140.20
204-02 KUKKO 204-02 Bearing Puller 2-Arm with sepearating claw and side clamp. 90mm wide x 100mm reach.

$216.50
(Picture)
204-V KUKKO 204-V "Cobra" puller for bearing inner race of stub axle. With 2-jaws and side clamp. Special tip with press piece.  90mm wide by 100mm reach.  Applicable to VW and other models.
KUKKO 204-V Puller for Inner Race of VW Stub Axle
$200.20
(Picture)



Bearing Separator - Sets

15-C
KUKKO 15-C Bearing Separator Set. Includes 15-3 separator with working range 25-155mm; 18-3 pulling tool with working width 80-300mm; 1 pair of 19-3-P extensions, 100mm long.
$789.60
(Picture)

17-K
KUKKO 17-K Separating Set with Quick Clamping Pressure Spindle. With parts 17-0 Separator, 18-0 Pulling Device,  19-1-P Extension Set, and small i_Boxx case. $370.60
17-A
KUKKO 17-A Separating Set with Quick Clamping Pressure Spindle. With parts 17-1 Separator, 18-1 Pulling Device,  19-1-P Extension Set, and small i-Boxx case.

$423.90
17-B
KUKKO 17-B Separating Set with Quick Clamping Pressure Spindle. With parts 17-2 Separator, 18-2 Pulling Device,  19-2-P Extension Set, and Large L-Boxx case. $624.00
17-C
KUKKO 17-B Separating Set with Quick Clamping Pressure Spindle. With parts 17-1 Separator, 18-1 Pulling Device,  19-1-P Extension Set, and Metall case. $862.60



.
Brake Tools
.
123 KUKKO 123 Disk Brake Pad Pry Bar witth special tip. Same as Mercedes 123 589 13 33 00

$39.99
126-00 KUKKO 126-00 Brake Caliper Piston Reset Tool. Used to force the brake caliper piston back to make room for the new brake pads. Good for Audi, BMW, Mercedes-Benz, Porsche, Volkswagen with disc brakes.



126-01 KUKKO 126-01 Brake pad puller. With 2 adjustable arms and 5mm pins. Overall about 140mm (5-1/2") long. With 100mm (4") wide handle. It has a green plastic dip handle.

126-02 KUKKO 126-02 Brake Piston Clamp, used to hold the brake cylinder piston in place with brake shoes removed. Good for Porsche 356 with drum brakes. Same as old Porsche Special Tool Number P47.

126-03 KUKKO 126-03 Brake Piston rotating pliers. With 3 position adjustment and plastic dip handles. With special jaws to grip the piston. **SPECIAL ORDER ONLY!!
126-15 Kukko 126-15 brake piston retractor. For 6-Piston Brake Calipers. With a universal fit, the retractor is suitable for the following vehicles: Touareg, Phaeton, Porsche Cayenne, Audi A8, Q7, BMW M3, etc.



$259.20
Cylinder Liner Puller

16
KUKKO 16 Cylinder Liner Puller Set. With 16-21 Puller and 16-22 Couterstay. Weight 7.6Kg

$843.40
(Picture)

16-21
KUKKO 16-21 Cylinder Liner Puller Device 60-155mm (2-3/8"-6-1/8")
$487.70
16-22 KUKKO 16-22 Counterstay to use with 16-21 puller.
$355.70
K-16
Kukko K-16 Cylinder Liner Puller Set in a Case. With 16-21 Puller , 16-22 Counterstay, 16-22-V Spindle Extension, Tube of Grease, and case.

$891.40



.
Gear Pullers - Basic - Spare Arms
.

Please Note: Due to technical and safety reasons, replacement arms are available in sets only.


Kukko pullers are specified by the maximum width and reach as measured and shown here.






Gear Pullers - Confined Space  - Spare Arms
. KUKKO Spare Arm Sets for confined spaces. For type 20 Puller. Special Order Only

1-191-P 200mm arms for 20-1 , 20-10 puller
1-251-P 250mm arms for 20-1 , 20-10 puller
1-401-P 400mm arms for 20-1 , 20-10 puller
2-151-P 150mm arms for 20-2 , 20-20 puller
2-301-P 300mm arms for 20-2, 20-20 puller
3-201-P 200mm arms for 20-3, 20-30, 20-4, 20-40 puller
3-301-P 300mm arms for 20-3, 20-30, 20-4, 20-40 puller
3-401-P 400mm arms for 20-3, 20-30, 20-4, 20-40 puller
3-501-P 500mm arms for 20-3, 20-30, 20-4, 20-40 puller
Price
on
Request


1-91-P KUKKO 1-91-P Puller arms for confined spaces. 100mm (4") length. Use with puller type 20-1 or 20-10.  Narrow tips. Tips 30mm wide, with 6mm lip as measured inside. 




__________
Gear Pullers - Standard - Spare Arms

KUKKO Spare Arm Sets. For type 20 Puller.

EAN-Code
4021176-
-001338
-002403
-003233
Art.-No.

1-90-P
2-150-P
3-200-P
für
for/pour
20-1, 20-10
20-2, 20-20
20-3, 20-30, 20-4, 20-40
mm 

100
150
200
-001666
-001901
-002731
1-190-P
1-250-P
2-300-P
20-1, 20-10
20-1, 20-10
20-2, 20-20
200
250
300
-003561
-003806
-004148
3-300-P
3-400-P
3-500-P
20-3, 20-30, 20-4, 20-40
20-3, 20-30, 20-4, 20-40
20-3, 20-30, 20-4, 20-40
300
400
500
Price on
Request



1-90-P KUKKO 1-90-P  Standard Length arms for type 20-1 or 20-10 puller. 100mm (4").  See Finger Size Here.
$60.50
(Picture)

1-190-P KUKKO 1-190-P Extra-long arms for type 20-1 or 20-10 puller. 200mm (8").  See Finger Size Here.
1-250-P KUKKO 1-250-P Extra-long arms for type 20-1 or 20-10 puller. 250mm (10"). See Finger Size Here.
2-150-P
KUKKO 2-150-P Spare Puller Arm Set 150mm (6"). For type 20-2 and 20-20 puller.
$113.30
2-V-150-P
KUKKO 2-V-150-P Two Bolt, Extension Arm Set for Pullers 20-2 or 20-20. 150mm long. Set of 2 extensions. Please NOTE: Kukko has changed the design on the pullers to use ArmLock Technology. The new design has a "T" type of attachment with one bolt. The old style was straight with two bolts. This tool has the 2 bolt design. Please check your puller arms before buying this set! The arms will look like the old 20-20 puller, to see it click hereOnly 1 left.
$124.99
(Picture)

2-V-150-P KUKKO 2-V-150-P One Bolt, Extension Arm Set for Pullers 20-2 or 20-20. 150mm long. Set of 2 extensions. Please NOTE: Kukko has changed the design on the pullers to use ArmLock Technology. The new design has a "T" type of attachment with one bolt. The old style was straight with two bolts. This tool has the 1 bolt design with "T". Please check your puller arms before buying this set!


$130.40
(Picture)

3-200-P KUKKO 3-200-P Standard Length. Spare Arm Set 200mm (8" inches). For type 20-3, 20-30, 20-4, 20-40 puller.
$240.50
3-300-P KUKKO 3-300-P Spare Arm Set 300mm (11-13/16"). For type 20-3, 20-30, 20-4, 20-40 puller. Note: Due to the weight, this item could ship UPS Ground. We will ship the best way.

$292.40




Gear Pullers - Basic
Kukko pullers are specified by the maximum width and reach as measured and shown here.

20-1 KUKKO 20-1 Adjustable 2-Arm puller,  90mm wide x 100mm reach. (3-17/16" x 3-15/16") Made in Germany. Pressure Screw Size: M14x1.5 Threads.
20-2
KUKKO 20-2 Puller 2-Arm, 160mm wide x 150mm reach. (6-5/16"x 5-29/32"). Pressure Screw Size: G1/2" Threads.   
$199.70
(Picture)

20-3 KUKKO 20-3 Sliding-arm universal puller with constantly parallel claws, type 20. Serves both as outside, inside, and centrical, and excentrical pulling. Uniform load distribution with excellent hold on the part to be pulled. 250mm wide (10") x 200mm (8") reach. (9-27/32" x 7-7/8") Pressure Screw Size: G3/4" Threads.
20-4
KUKKO 20-4 Puller 2-Arm, 520mm wide x 200mm reach.  (20-15/32" x 7-7/8"). Pressure Screw Size: G 1" Threads. $799.70
20-5 KUKKO 20-5 Puller 2-Arm , 750mm wide x (400-700mm) reach.  (29-1/2"x 15-3/4" to 27-9/16").  With adjustable reach. Pressure Screw Size:  G 1-1/8" Threads. Price on
Request
(Picture)
20-10 KUKKO 20-10 Puller 2-Arm, 120mm wide x 100mm reach.  (4-23/32" x 3-15/16"). Pressure Screw Size: M14x1.5 Threads. See Finger Size Here.


20-20 KUKKO 20-20 Puller 2-Arm,  200mm wide x 150mm reach.  (7-7/8"x 5-29/32") Pressure Screw Size: G1/2" Threads. This puller comes with arms 2-150-P, Pressure Screw 621220, and Cross Bar 20-20-T. 

20-30 KUKKO 20-30 Puller 2-Arm,  350mm wide x 200mm reach. (13-25/32"x 7-7/8"). Pressure Screw Size: G3/4" Threads. With Arms (3-200-P) and Pressure Screw (626300)




20-40 KUKKO 20-40 Puller 2-Arm. 650mm wide x 300mm reach. (25-5/8"x 11-13/16") .    $1,360.80
20-40-AV KUKKO 20-40-AV Puller 2-Arm with Adjustable Reach. 650mm (25-5/8") wide, Adjustable Reach 300-500mm (11-7/8"- 19-3/4").  Maximum 12 Ton Pressue. Screw 633500 BSPP British Whitworth Pipe Thread Size G 1" with thread diameter 33.249mm.

$1630.10

KUKKO Type 20 Spare Arm Sets
Price on
Request
20-S KUKKO Gear Pullers, Type 20 , Slender Arms.
More
Info


Type 41
KUKKO Type 41 Universal 2-Jaw Puller with Swiveling Jaws.
KUKKO Type 41 Puller Samstag Sales

More
Info








41-0
KUKKO 41-0 Mini Swivel-Arm 2-Arm Gear Puller 60mm wide x 40mm reach. Pressure Screw Size: M10 Threads. Popular size used on Printing Equipment. Cross-reference to Heidelberg 66.024.010 

 







$39.90
(Picture)




41-2 KUKKO 41-2  Puller, 2-Arm 80mm wide x 80mm reach. Pressure Screw Size: M9 Threads.


Type 44
Type 44 Puller 2-Arm. Self-centering pulling hooks. Two sided spindle tip.


44-1
Type 44-1 Puller 2-Arm. Self-centering pulling hooks. Two sided spindle tip. Width 100mm , Reach 100mm. Load 3 ton max. Bolt head 13mm.
$64.80
44-2
Type 44-2 Puller 2-Arm. Self-centering pulling hooks. Two sided spindle tip. Width 120mm , Reach 120mm. Load 5 ton max. Bolt head 17mm. $102.30
44-3 Type 44-3 Puller 2-Arm. Self-centering pulling hooks. Two sided spindle tip. Width 160mm , Reach 160mm. Load 6 ton max. Bolt head 19mm. $158.00
Type 204


204-1 KUKKO 204-1  Puller 2-Arm with holding side clamp, range 80mm wide x 90mm reach. Pressure Screw Size: M18x1.5 Threads. Good for Pitman arm removal on steering gear.

$158.00



204-2 KUKKO 204-2  Puller 2-Arm with holding side clamp, range 100mm wide x 100mm reach. Pressure Screw Size: G1/2" Threads.

204-3 KUKKO 204-3 Puller 2-Arm  with holding side clamp, range 150mm wide x 140mm reach. Special Order Only.
$293.80




205-02
KUKKO 205-02 Puller 2-Arm. 250mm wide, 220mm reach. Pressure Screw Size: G1/2" Threads.




210-1
KUKKO 210-1 2-Arm Separator-Puller with side clamp, 95mm wide, 170mm reach. Pressure Screw Size: G1/2" Threads.




Pressure Screw




See the Reference Table for a complete list of pressure screws and applications.
612140 KUKKO 612140 Spare Tip for Pressure Screw. Used in 20-1, 20-10, 30-1, 30-10 Pullers


$9.99
614135 KUKKO 614135 Spare Pressure Screw with M14x1.5 metric threads, 135mm long, with 17mm hex on top. Includes tip 612140.  For gear pullers: 12-1, 30-1, 30-10+, 30-1-2, 30-10, 30-10+, 30-10-2, 32-1, 33, 112-2, 201-1, 202-1, 203-1, 30-1-S, 30-1+S, 30-10-S, 30-10+S, 30-10SP, 30-1-S-T, 30-10-S-T, 30-1+S-T, 30-10+S-T, with M14x1.5 thread
614160 KUKKO 614160 Spare Pressure Screw with M14x1.5 metric threads, 160mm long, with 17mm hex on top. Includes tip 612140. For gear pullers: 20-1, 20-10, 20-10-V, 44-2, 45-2, 112-20, 113-20, 205-01, 206-01, 207-01, 208-01, 209-01 , 20-1-S, 20-10-S, 20-1+S, 20-10+S, with M14x1.5 threads.
 $51.60
616180
KUKKO 616180 Spare Tip for Pressure Screw. Used in 12-2, 18-1, 32-2, 110-2, 110-20

$13.99
620260 KUKKO 620260 Spare Tip for Pressure Screw. Double End. Used in 20-2, 20-20, 20-3, 20-30 Pullers


$13.99
621220 KUKKO 621220 Spare Pressure Screw. BSSP (British Standard Pipe Parallel)  55 degree, G 1/2" threads 20.995mm x 210mm long, 14TPI, with 22mm hex on top. Includes tip 620260. (Replaced 620220) For pullers 20-20-3, 20-20+3, 30-2, 30-2+, 30-2-3, 30-20, 30-20+, 30-20-3, 31-1, 31-2, 200-U, 201-2, 202-2, 203-2, 205-02, 206-02, 207-02, 208-02, 209-02, 210-1, 210-01, 301-3, 301-4, 20-2-S, 20-2+S, 20-20-S, 20-20+S, 20-20SP, 30-2-S, 30-2+S, 30-20-S, 30-20+S, 30-20SP, 17-3, 18-2, 20-2, 20-20, 20-2+, 20-20+, 20-2-S, 20-20-S, 30-2, 30-20, 30-2+, 30-20+, 30-2-S, 30-20-S 
$84.00
626300 KUKKO 626300 Spare Pressure Screw with BSSP (British Standard Pipe Parallel) 55 degree,  G 3/4" threads 26.441mm x 300mm long, 14TPI, with 27mm hex on top. Includes tip 620260. For gear pullers: 18-3, 20-3, 20-3+, 20-3-3, 20-3-4, 20-3-5, 20-30, 20-30+, 20-30-3, 20-30-4, 20-30-5, 30-3, 30-3+, 30-3-3, 30-3-4, 30-3-5, 201-3, 201-4, 202-3, 202-4, 203-3, 203-4, 205-1, 206-1, 207-1, 20-3-S, 20-3+S, 20-30-S, 20-30+S, 20-30SP, 30-3-S, 30-3+S, 30-3SP. With new dual end tip, pointed and round.  Pull out the tip to swich it to the other end. This is the current sub for old part number 626280.

$120.00


Gear Puller - Quick Adjust - 2 Arm
20-1+
KUKKO 20-1+ Quick Adjust Puller. 2-Arm. Arm width and height: 90mm x 100mm (3-5/8"x 4")


$124.80
20-10+
KUKKO 20-10+ 2-Arm Quick Adjust Puller. Arm width and height: 120mm x 100mm (5"x 4")
$134.40
(Picture)

20-2+
KUKKO 20-2+ 2-Arm Quick Adjust Puller. Arm width and height: 160mm x 150mm (6"x 6")
$227.10
20-20+
KUKKO 20-20+ 2-Arm Quick Adjust Puller. Arm width and height: 200mm x 150mm (8"x 6")
$256.40
20-3+
KUKKO 20-3+ 2-Arm Quick Adjust Puller. Arm width and height: 250mm x 200mm (10"x 8")
$413.80
20-30+
KUKKO 20-30+ 2-Arm puller, type 20 PLUS quick-adjusting. Has knobs to help loosen and adjust puller arms quickly without a wrench. Arm width and height: 350mm x 200mm (14" x 8"). Pressure Screw Size: G3/4" Threads.

$443.10


Gear Puller - Quick Adjust - 2 Arm - Slender

20-1+S KUKKO 20-1+S 2-Arm SLENDER Quick Adjust Puller. Working width and height: 90mm x 100mm (3 5/8" x 4")
$156.00
20-10+S KUKKO 20-10+S 2-Arm SLENDER Quick Adjust Puller. Technology for confined spaces. Working width and height: 120mm x 100mm (5" x 4").  Pressure Screw Size: M14x1.5 Threads. With new reversible tip, round and pointed tip.  ( Pic2 ) ( Pic3) ( Pic4 ) With slinder fingers, see the size here.

$165.60
20-2+S
KUKKO 20-20+S 2-Arm SLENDER Quick Adjust Puller. Arm width and height: 160mm x 150mm (6" x 6") $282.80
20-20+S
KUKKO 20-20+S 2-Arm SLENDER Quick Adjust Puller. Arm width and height: 200mm x 150mm (8" x 6")
$303.90
20-3+S
KUKKO 20-3+S 2-Arm SLENDER Quick Adjust Puller. Arm width and height: 250mm x 200mm (10" x 8")
$503.60
20-30+S KUKKO 20-30+S 2-Arm SLENDER Quick Adjust Puller. Arm width and height: 350mm x 200mm (14" x 8")
$532.40


Gear Puller - Quick Adjust - 2+3 Arm - Slender - SETS

KS-2030-1-193+S
KUKKO KS-2030-1-193+S Confined Space Gear Puller Set with parts to make a 2-Arm or 3-Arm puller, 90x100mm (3-5/8" x 4") and 90x200mm (3-5/8" x 8"). This set will do the work of 4 pullers,  (20-1+S ), (20-1-2+S), (30-1+S), (30-1-2+S). Supplied in a Kukko plastic case. Special Order.
     
$480.50
K-2030-10+S
Kukko K-2030-10+S  Set of two and three arm pullers with narrow jaws. Opening of 120-130mm with a height of 100-350mm Quick-Adjust. Special Order.

$796.80


Gear Puller - Quick Adjust - 3 Arm
30-1+
KUKKO 30-1+ 3-Arm Quick Adjusting Puller. Arm width and height: 90mm x 100mm (3-5/8" x 4")
$154.60
30-10+
KUKKO 30-10+ 3-Arm Quick Adjusting Puller. Arm width and height: 130mm x 100mm (5" x 4")

$181.00
30-2+
KUKKO 30-2+ 3-Arm Quick Adjusting Puller. Arm width and height: 160mm x 150mm (6" x 6")
$325.00
30-20+
KUKKO 30-20+ 3-Arm Quick Adjusting Puller. Arm width and height: 200mm x 150mm (8" x 6")
$352.40
30-3+
KUKKO 30-3+ 3-Arm Quick Adjusting Puller. Arm width and height: 250mm x 200mm (10" x 8")
$653.30

Gear Puller - Quick Adjust - 3 Arm - Slender

30-1+S
KUKKO 30-1+S 3-Arm SLENDER Quick Adjust Puller. Arm width and height: 90mm x 100mm (3-5/8" x 4")
$227.10
30-10+S
KUKKO 30-10+S 3-Arm SLENDER Quick Adjust Puller. Arm width and height: 130mm x 100mm (5" x 4")

$224.80
30-2+S
KUKKO 30-2+S 3-Arm SLENDER Quick Adjust Puller. Arm width and height: 160mm x 150mm (6" x 6")
$393.60
30-20+S
KUKKO 30-20+S 3-Arm SLENDER Quick Adjust Puller. Arm width and height: 200mm x 150mm (8" x 6")
$421.50
30-3+S KUKKO 30-3+S 3-Arm SLENDER Quick Adjust Puller. Arm width and height: 250mm x 200mm (10" x 8")
$770.00


Gear Puller - Self-Centering 2 or 3 Arm

43-2
KUKKO 43-2 Small 2-Arm Puller. Self Centering. With 70mm wide x 70mm reach. Pressure Screw Size: M9 Threads.
$56.20
44-3
Kukko 44-3 Self centering 2-Arm Puller with AutoGrip Technology. 160mm wide x 160mm reach. Special Order.
$158.00
45-1 KUKKO 45-1 Self-Centering 3 Jaw Puller. 100mm x100mm( 3-7/8"x3-7/8"). $98.90
45-2 KUKKO 45-2 Self-Centering 3 Jaw Puller. 120mm x120mm( 4-3/4"x4-3/4").

$147.90
45-3
KUKKO 45-3 Self-Centering 3 Jaw Puller. 160mm x160mm( 6-3/8"x6-3/8"). $220.80
45-4
KUKKO 45-4 Self-Centering 3 Jaw Puller. 250mm x200mm( 9-7/8"x7-7/8"). $312.00
45-5
KUKKO 45-5 Self-Centering 3 Jaw Puller. 300mm x250mm( 11-7/8"x9-7/8"). $388.40
45-6
KUKKO 45-6 Self-Centering 3 Jaw Puller. 375mm x275mm( 14-3/4"x11"). $675.90
45-7
KUKKO 45-7 Self-Centering 3 Jaw Puller. 600mm x350mm( 23-5/8"x13-3/4"). $933.60
845-1-B
KUKKO 845-1-B Universal 3-Jaw puller with short hydraulic spindel and self-centering jaws.

Price on
Request








Gear Puller - Swiveling - 3 Arm

KUKKO
202-1
KUKKO 3-Jaw Puller. with Reversible double-end Jaws. With 85mm reach and 150mm spread.



$108.00

KUKKO
207
KUKKO 3-Jaw Puller. Availabe in size 120mm up to 1000mm (39" inches).

More
Info

Kukko 207-00
Kukko 207-00 Puller. 3 jaw, 120mm spread size, 100mm reach.
$80.70
Kukko 207-01 Kukko 207-01 Puller. 3 jaw, 200mm spread size, 150mm reach. $108.50
Kukko 207-02 Kukko 207-02 Puller. 3 jaw, 300mm spread size, 220mm reach. $181.00
Kukko 207-1 Kukko 207-1 Puller. 3 jaw, 400mm spread size, 280mm reach. $385.00
Kukko 207-2 Kukko 207-2 Puller. 3 jaw, 450mm spread size, 400mm reach. $467.60
Kukko 207-3 Kukko 207-3 Puller. 3 jaw, 550mm spread size, 540mm reach. $626.40
Kukko 207-65 Kukko 207-65 Puller. 3 jaw, 650mm spread size, 650mm reach. $1,311.90
Kukko 207-80 Kukko 207-80 Puller. 3 jaw, 800mm spread size, 800mm reach. $1,360.80
Kukko 207-95 Kukko 207-95 Puller. 3 jaw, 1000mm spread size, 1000mm reach. $1,385.30



Gear Puller - Hydraulic - 2 Arm

KUKKO
20-4-H
KUKKO 20-4-H Gear Puller. 2-Arm, 520mm x (300-500mm) adjustable length arms. With Hydraulic action. Rated 15 tons.
Special Order!

$1807.70
KUKKO
20-40-H
KUKKO 20-40-H Gear Puller. 2-Arm, 650mm x (300-500mm) adjustable length arms. With Hydraulic action. Rated 15 tons. $2294.40
KUKKO
20-5-H
KUKKO 20-5-H Gear Puller. 2-Arm, 750mm x (400-700mm) adjustable length arms. With Hydraulic action. Rated 20 tons. $3839.60




Grease
699904 KUKKO 699904 Special Sliding Grease for pressure spindles and screws. KUKKO KSF-69 Green.  Small tube  2-7/8" long with 4g.



$9.99
699915 KUKKO 699915 Special Sliding Grease for pressure spindles and screws. KUKKO KSF-69 Green.  Small tube  4" long with 15g.


$19.99

Hand Vice
101-100 Turnus 101-100 hand vice. 100mm long. Jaws 40mm wide, 18mm opening
101-120
Turnus 101-120 hand vice. 120mm long. Jaws 45mm wide x 22mm opening.
$34.60
101-130
Turnus 101-130 hand vice. 130mm long. Jaws 48mm wide x 25mm opening. $41.30
101-145
Turnus 101-145 hand vice. 145mm long. Jaws 52mm wide x 28mm opening. $48.00
101-160
Turnus 101-160 hand vice. 160mm long. Jaws 58mm wide x 35mm opening. $53.30
101-180
Turnus 101-180 hand vice. 180mm long. Jaws 60mm wide x 40mm opening. $81.20
101-200 Turnus 101-200 hand vice. 200mm long. Jaws 65mm wide x 45mm opening. $103.70
102-120
Turnus 102-120 Hydraulics with pointed jaw for clamping workpieces. Serrated surface inside the jaw, wingnut, covered captive round steel spring, joint guide. Overall length 120mm, Jaw 13mm wide x 20mm opening.
$33.60
103-160
Turnus 103-160 Hand vice with wrench, with wide jaw, hexagonal nut and wrench for clamping workpieces. Internal side of jaw is serrated with prismatic incision. Overall length 160mm, 58mm wide x 35mm jaw opening.
$66.30
103-180
Turnus 103-180 Hand vice with wrench, with wide jaw, hexagonal nut and wrench for clamping workpieces. Internal side of jaw is serrated with prismatic incision. Overall length 180mm, 60mm wide x 40mm jaw opening. $98.90
103-200
Turnus 103-200 Hand vice with wrench, with wide jaw, hexagonal nut and wrench for clamping workpieces. Internal side of jaw is serrated with prismatic incision. Overall length 200mm, 65mm wide x 45mm jaw opening. $127.20
106-180 Turnus 106-180 Double Strong Hand Vice. Overall Length 180mm. 68mm wide x 40mm jaw opening $116.70
106-200 Turnus 106-200 Double Strong Hand Vice. Overall Length 200mm. 70mm wide x 45mm jaw opening

$151.20
107-200 Turnus 107-200 Hand Vice, Overall length 200, 85mm wide x 50mm jaw opening.
$197.80
109-160
Turnus 109-160 Hand Vice for Machinist. 160mm long. 65mm wide x 40mm jaw opening. $126.80
109-180 Turnus 109-180 Hand Vice for Machinist. 180mm long. 70mm wide x 40mm jaw opening. $153.20
109-200 Turnus 109-200 Hand Vice for Machinist. 200mm long. 80mm wide x 50mm jaw opening. Note: More Information.


$192.00
More
Information

109-250
Turnus 109-250 Hand Vice for Machinist. 250mm long. 90mm wide x 60mm jaw opening. $318.30
112-125
Turnus 112-125 Small Stem File Vice, with pointed jaw for clamping workpieces in combination with series 520. Overall Length 125mm, 30mm wide x 30mm jaw opening.
$58.60
112-150 Turnus 112-150 Small Stem File Vice, with pointed jaw for clamping workpieces in combination with series 520. Overall Length 150mm, 40mm wide x 35mm jaw opening. $76.40
113-115
Turnus 113-115 Pin Vice. 115mm long with knurled handle. 16mm wide jaws. Chrome plated steel. $39.40
113-116 Turnus 113-116 Pin Vice. 115mm long with knurled handle. 7mm wide jaws. Chrome plated steel. $39.40






113-130
Turnus 113-130 Pin Vice. 130mm (5") long with knurled handle. 20mm (13/16") wide jaws. Chrome plated steel.








$45.60
(Picture)

113-131
Turnus 113-131 Pin Vice. 130mm long with knurled handle. 10mm wide jaws. Chrome plated steel. $45.60




Hydraulic Tools

800

Short Hydraulic Spindles.

Price on
Request

.

8-01
Type 8-01 Long Hydraulic Spindle. 10 Ton, Used with puller type 12-4, 12-5, 18-2, 20-2, 20-20, 30-2, 30-20, 41-5, 42-5, 205-02, 206-02, 207-02.
KUKKO Hydraulic Spindle Type 8-0
$315.40
8-02 Type 8-02 Long Hydraulic Spindle. 12 Ton.  Used with puller type  12-6, 12-7, 18-3, 20-3, 20-30, 30-3, 205-1, 205-2, 205-3, 206-1, 206-2, 206-3, 207-1, 207-3, 207-3.
$361.00

.

9-1 Auxiliary Hydraulic Ram. Used to increase the pressure for mechanical pulling devices. 37mm diameter. 10 Ton Max
$222.80
9-2

Auxiliary Hydraulic Ram. Used to increase the pressure for mechanical pulling devices. 50mm diameter. 15 ton Max

 
$275.10
9-3 Auxiliary Hydraulic Ram. Used to increase the pressure for mechanical pulling devices. 80mm diameter. 30 ton Max $673.00
YHP-326
Kukko Hydraulic Hand Pump, Gauge and Hose Set. Included YHP-320 Hydraulic Hand Pump. Holds 900 Cubic Cm of oil, Max Force 50 Tons; YF-200 Hose 2m length; YM-325 Pressure Gauge rated at 700 Bar




.
Internal  Bearing Pullers
*********

          

21-0 KUKKO 21-0 Internal bearing puller. For size 5 to 8mm. (13/64-5/16") 73mm in length. With M7 Thread.
$77.80
(Picture)

21-00 KUKKO 21-00 Internal bearing puller. For size 6 to 10mm. (1/4-25/64") 73mm in length. With M7 Thread.
$77.80
21-01 KUKKO 21-01 Internal bearing puller. For size 8 to 12mm. (5/16-1/2") 73mm in length. With M7 Thread.
KUKKO 21-01 Internal Extractor
$77.80
(Picture)
21-02
KUKKO 21-02 Internal bearing puller. For size 10-14mm. (13/32-9/16") 73mm in length. With M7 Thread.
$77.80
21-1 KUKKO 21-1 Internal bearing puller. For size 12-16mm. (31/64-5/8") 72mm in length. With M7 Thread.
Cross Reference: (000 589 24 33 00)
$77.80
21-2 KUKKO 21-2 Internal bearing puller. For size 14-19mm. (35/64-3/4") 72mm in length. With M7 Thread.
$77.80
21-3 KUKKO 21-3 Internal bearing puller. For size 18-23mm. (23/32-29/32") 89mm in length. With M10 Thread.
21-4 KUKKO 21-4 Internal bearing puller. For size 20-30mm. (7/8"-1-7/64") 92mm in length. With M10 Thread.
21-5 KUKKO 21-5 Internal bearing puller. For size 28-40mm. (1-7/64"-1-29/64") 101mm in length. With M10 Thread.
21-6 KUKKO 21-6 Internal bearing puller. For size 35-46mm. (1-27/64"-1-13/16") 113mm in length. With 15-16G thread. It is 15mm diameter, 16 TPI, with Whitworth 55 degree thread angle.



21-7 KUKKO 21-7 Internal bearing puller. For size 45-58mm, (1-25/32"- 2-19/64") 135mm in length. With 15-16G thread. It is 15mm diameter, 16 TPI, with Whitworth 55 degree thread angle. 
21-8 KUKKO 21-8 Internal bearing puller. For size 56-70mm. (2-13/64- 2-3/4") 133mm in length. With 15-16G thread. It is 15mm diameter, 16 TPI, with Whitworth 55 degree thread angle.


21-9 KUKKO 21-9 Internal bearing puller. For size 70-100mm. (2-3/4- 3-15/16") 166mm in length. With G1/2" Whitworth Pipe Thread.


21-89
KUKKO 21-89 Internal Extractor. For bores of 56-110mm (2 1/4-4 3/8"). 185mm in length. With 1/2" Whitworth Pipe Thread. This tool is used with a 22-0-2 slide hammer on 22-4 counterstay that is NOT included.
*Special Order Only.
$417.20
(Picture)
21-90
KUKKO 21-90 Internal Extractor. This extractor has two bores for jaw attachment. Inner holes for bores of 100-150mm (4-6") and outer holes for bores of 150-200mm (6-7 7/8"). 220mm in length. With 3/4" Whitworth Pipe Thread. This tool is used with a 22-0-2 slide hammer on 22-5 counterstay that is NOT included.
*Special Order Only.

$545.80
(Picture)

24-A
KUKKO 24-A Bearing Pulling and Extracting Tool Set. For pulling bearings, gears and discs and for extracting interior bearings, outer bearing rings and bushings. Set contains exterior pulling device, internal extractor, counter supports and pulling device chunk. Arm width size 2-3/8" - 3-1/2", internal bearing sizes 3/16" - 1-7/8". Set includes: 20-1, 43-1, 22-1, 22-2, 21-1, 21-2, 21-3, 21-4, 21-5, 26-1, and 23.
$1,290.30
24-B
KUKKO 24-B Bearing Pulling and Extracting Tool Set. For pulling bearings, gears and discs and for extracting interior bearings, outer bearing rings and bushings. Set contains exterior pulling device, internal extractor, counter supports and pulling device chunk. Arm width size 2-3/8" - 5-7/8", internal bearing sizes 3/16" - 2-3/4". Set includes: 20-1, 20-2, 43-1, 22-1, 22-2, 21-1, 21-2, 21-3, 21-4, 21-5, 21-6, 21-7, 21-8, and 23.
$1,893.60
24-C KUKKO 24-C Bearing Pulling and Extracting Tool Set. For pulling bearings, gears and discs and for extracting interior bearings, outer bearing rings and bushings. Set contains exterior pulling device, internal extractor, counter supports and pulling device chunk. Arm width size 2-3/8" - 5-7/8", internal bearing sizes 3/16" - 2-1/4". Set includes: 20-1, 20-2, 43-1, 22-1, 22-2, 22-4, 21-1, 21-2, 21-3, 21-4, 21-5, 21-6, 21-7, 21-89, and 23. $2,498.40

Type 25

25-A
KUKKO 25-A Internal Extractor Set. Range 12-46mm. With 2 counterstays and 6 extractors. For more info see the Product Data Sheet. Shipping 16 pounds, 18" x 15" x 7" boxed

$794.00
25-B
KUKKO 25-B Internal Extractor Set. For internal bearing sizes 3/16" - 2-3/4". Set includes: 22-1, 22-2, 21-1, 21-2, 21-3, 21-4, 21-5, 21-6, 21-7, and 21-8.
$1,130.40
25-C
KUKKO 25-C Internal Extractor Set. For internal bearing sizes 3/16" - 4-3/8". Set includes: 22-1, 22-2, 22-4, 21-1, 21-2, 21-3, 21-4, 21-5, 21-6, 21-7, and 21-89. $1,653.60
25-D
KUKKO 25-D Internal Extractor Set. For internal bearing sizes 3/16" - 2-3/4". Set includes: 22-1, 22-2, 21-1, 21-2, 21-3, 21-4, 21-5, 21-6, 21-7, and 21-8. $775.20
25-K
KUKKO 25-B Internal Extractor Set. For internal bearing sizes 2-1/4" - 4-3/8". Set includes: 22-4 and 21-89.
$394.60
25-N
KUKKO 25-B Internal Extractor Set. For internal bearing sizes 7/16" - 2-3/4". Set includes: 22-1, 21-41, 21-42, 21-43, 21-44, 21-45, and 21-46. $956.20






27-A
KUKKO 27-A Universal Puller Set with Slide Hammer. Includes Segment Type Internal Extractors. Bearing inner diameter range 9.5-48mm , Bearing Cage Type Puller, Slide hammer with M12 Threads, 204-0 Cobra Puller with side clamp, Screw adapter size M3, M4, M5, M6, M8, M10 .  For more info see the Product Data Sheet.


$1291.70



28-A
KUKKO 28-A Set with Slide Hammer, Internal Extractors, and dowel pins. Bearing inner diameter range 6-19mm.  Slide hammer 900g weight with M12 threads. Pins size M3, M4, M5, M6, M8, M10, M12, M14, M16, M18 . For more info see the Product Data Sheet.



$552.00
TYPE 28
Price on
Request




Internal Bearing Puller - Counterstay

22-1 KUKKO 22-1 Counterstay to use with Internal bearing extractors, bearings from size 5mm to 40mm. Combinable with 21-0, 21-00, 21-01, 21-02, 21-1, 21-2, 21-3, 21-4, 21-5, 21-0-E, 21-1-E, 21-2-E, 21-3-E, 21-4-E. Includes Adapter Reducer Collar GA7-10
22-2 KUKKO 22-2 Counterstay to use with Internal bearing extractors, bearings from size 18mm to 70mm. Combinable with 21-3, 21-4, 21-5, 21-6, 21-7, 21-8, 21-0-E, 21-1-E, 21-2-E, 21-3-E, 21-4-E, 21-5-E, 21-6-E, 21-7-E. Includes Adapter Reducer Collar GA10-1516



22-3 KUKKO 22-3 Counterstay to use with Internal bearing extractors, bearings from size 36mm to 100mm. Combinable with 21-6, 21-7, 21-8, 21-9.
22-4 KUKKO 22-4 Counterstay with feet. This is for use with 21-89 internal extractor. Combinable with 21-89. Special Order Only.

$285.20 (Picture)
22-5
KUKKO 22-5 Counterstay with feet. This is for use with 21-90 internal extractor. Combinable with 21-90. Special Order Only. $321.20


Internal Bearing Puller - Segment Type

21-0-E Kukko 21-0-E INTERNAL EXTRACTOR Segment grip type. With 2 Segments. Diameter 4.8-6.5 mm

$77.80
21-00-E Kukko 21-00-E INTERNAL EXTRACTOR Segment grip type. With 2 Segments. Diameter 6.8-9.5 mm


$77.80
21-01-E Kukko 21-01-E INTERNAL EXTRACTOR Segment grip type. With 2 Segments. Diameter 9.5-12.5 mm


$77.80
21-1-E KUKKO 21-1-E INTERNAL EXTRACTOR Segment grip type. With 3 Segments. Diameter 12-16 mm

$77.80
21-2-E KUKKO 21-2-E INTERNAL EXTRACTOR Segment grip type. With 3 Segments. Diameter 14-19 mm


$77.80
21-3-E
KUKKO 21-3-E INTERNAL EXTRACTOR Segment grip type. With 3 Segments. Diameter 18-23 mm

$77.80
21-4-E
KUKKO 21-4-E INTERNAL EXTRACTOR Segment grip type. With 4 Segments. Diameter 24-34 mm

$85.50
21-5-E
KUKKO 21-5-E INTERNAL EXTRACTOR Segment grip type. With 4 Segments. Diameter 34-48  mm

$96.00
21-6-E KUKKO 21-6-E INTERNAL EXTRACTOR Segment grip type. With 6 Segments. Diameter 48-63  mm

$107.10
21-7-E KUKKO 21-7-E INTERNAL EXTRACTOR Segment grip type. With 6 Segments. Diameter 63-78mm,  120mm long.
      
$144.00
Picture


.
Key Lifter
.
139-1 KUKKO 139-1 Key Lifter used to pull keys out of the slot on shafts. Working range 5-35mm. The tool is 110mm tall by 122-144mm wide depending on setup. Turn one knob to grab the key, turn the other knob to pull the key out! Makes a tough job easy with no damage to the shaft.
  
{Click on picture for a larger view}
$825.60



 
Needle Bearing Extractors
.
. Needle Bearing Extractor. For extracting needle bearings from crankshaft, casings, etc. .
21-40 KUKKO 21-40 Needle Bearing Extractor. Working range 9.6-18mm (3/8"-3/4") for shaft size 10 mm (3/8") Good for FORD - all V engines. 92mm in length.


$137.80
21-41 KUKKO 21-41 Needle Bearing Extractor. Working range 11.5-19mm (29/64"-3/4") for shaft size 12mm (1/2") Good for BMW - all, Opel Kadett. 92mm in length. Used with a slide hammer or counterstay that is not included. SALE!
SALE
$119.99
$137.80

(Picture)
21-42 KUKKO 21-42 Needle Bearing Extractor. Working range 12.5-21mm (1/2"-55/64") for shaft size 14 mm (9/16") 92mm in length. Used with a slide hammer or counterstay that is not included.

$137.80
(Picture)

21-43 KUKKO 21-43 Needle Bearing Extractor. Working range 14.5-22mm (37/64"-7/8") for shaft size 15+16 mm (5/8") Good for VW - all except Audi, Opel - all except Kadett. 92mm in length
$137.80
21-44 KUKKO 21-44 Needle Bearing Extractor. Working range 16.5-23mm (21/32"-59/64") for shaft size 17+18 mm (3/4") Good for Audi 100. 92mm in length
$137.80
21-45 KUKKO 21-45 Needle Bearing Extractor. Working range 18.5-24mm (47/64"-61/64") for shaft size 20 mm (13/16") 92mm in length
$137.80
21-46 KUKKO 21-46 Needle Bearing Extractor. Working range 20-25mm (51/64"-1") for shaft size 22 mm (7/8") 92mm in length
$137.80


NON-Sparking Tools


KUKKO TURNUS
NON-
Sparking

Type 1007F Non-sparking wrenches for use in areas containing combustible or easily ignitable vapors. The metal alloy has been tested by the German Federal Institute for Materials Research and Testing in Berlin Germany.
Also available are screwdrivers, Hex keys, hammers, pliers, adjustable wrenches, single open end wrenches, sockets, and ratchet.

Price on
Request

.
Nut Splitter
.
54-2
KUKKO 54-2 Double-edged Mechanical nut splitter for nuts 3/8" - 1. 1/16". For nuts in classes 5, 6, and 8.
$115.70
54-2-M
Replacement blade for KUKKO 54-2.

54-3
KUKKO 54-2 Double-edged Mechanical nut splitter for nuts 3/4" - 1. 3/8".For nuts in classes 5, 6, and 8.

$150.80
54-3-M Replacement blade for KUKKO 54-3.

K-54-B
KUKKO K-54-B Mechanical Nut Splitter Set, with tools 54-2 and 54-3, and spare replacement blades.  More Info

$382.60




   Type 55 Single Edge 

55-0 KUKKO 55-0 Mechanical nut splitter for nuts 4-10mm. 5/32" - 13/32"
$112.90
55-0-M Replacement blade for KUKKO 55-0.
55-1 KUKKO 55-1 Mechanical nut splitter for nuts 10-18mm. 7/16" - 11/16"
Kukko Mechanical Nut Splitter Single Blade
$137.60
55-1-M Replacement blade for KUKKO 55-1.
55-2

KUKKO 55-2 Mechanical nut splitter for nuts 19-27mm, 3/4" to 1-1/16". For nuts in class 6 and below.
$103.20
(Picture)
55-2-M
Replacement blade for KUKKO 55-2
55-3
KUKKO 55-3 Mechanical nut splitter for nuts 1. 1/16" - 1. 3/8". For nuts in class 6 and below. $134.00
55-3-M
Replacement blade for KUKKO 55-3.
55-4
KUKKO 55-4 Mechanical nut splitter for nuts 1. 1/4" - 2". For nuts in class 6 and below. $447.90
55-4-M
Replacement blade for KUKKO 55-4.


   Type 56 Hydraulic 

56-1
KUKKO 56-1 Single-edged Grease Hydraulic nut splitter for nuts 1/4" -  7/8".
$251.60
56-2
KUKKO 56-2 Single-edged Grease Hydraulic nut splitter for nuts 7/8" - 1. 3/8".

$473.80
56-3 KUKKO 56-3 Single-edged Grease Hydraulic nut splitter for nuts 1. 1/16" - 1. 3/8"
$692.70

.
Other Tools
.
211T505 Turnus 211T505 set of Tamper-Proof Torx "L" shape keys. TX9-TX 40. Eight pieces.

334-030
Turnus 334-030 Tool Marker. 27mm Diameter. Brass. Price for 1.

$3.40
(Picture)




991-160 WINKELGREIF 991-160  cable cutters. 160mm long. Spring action handles. No longer available. Only 1 left.

.
Picks & Hooks
.
177-HP04 Turnus 177-HP-04 Pick and Hook Set. Set of 4 hook and pick assortment each about 150mm (6") in length. High-quality chromium vanadium molybdenum steel, hardened throughout.

.
Scissors
.
995-200 TURNUS 995-200 Industrial/Professional scissors. Drop-forged and hardened. Made with special tool steel with polished cutting edges and black painted handles. Designed for cutting thick paper and cardboard, thin rubber, leather and textiles. 200mm long (8"). High quality shears. Special Order

995-250

WINKELGREIF 995-250 Industrial/Professional scissors. Drop-forged and hardened. Made with special tool steel with polished cutting edges and black painted handles. Designed for cutting thick paper and cardboard, thin rubber, leather and textiles. 250mm long (10"). High quality shears. Special Order



Screw Clamps

469-0100-050

Turnus 469-0100-050 All steel screw clamp with wood handle. 100x50mm


Other sizes available upon request.
$22.60
476K0300-140

Turnus 476K0300-140 Heavy U-clamp. All-steel heavy duty fitters clamps with non-slip device. 300x140mm

Other sizes available upon request.
$230.20

Turnus 505K040 Deep throad clamp. Low torque cast iron screw clamp with steel locking handle. 400x200mm

Other sizes available upon request.
$95.10

SETS - Wall Mount

WT-018 KUKKO WT-018 Set of Puller product range - Internal Extracting - TOP

Price on
Request.




Slide Hammer

 




02210021
New Number:
GA7-10
KUKKO GA7-10 Adapter Reducer.
SIZE: (M7 Female) x (M10 Male)  Adapter.
Used with Counter stay for 22-1 and will fit puller 21-0, 21-00, 21-01, 21-02, 21-1 and 21-2


$13.20
02220021
  New Number:
GA10-1516
KUKKO GA10-1516 Adapter Reducer.
SIZE:
(M10 Female) to ( 15-16G Male Whitworth Threads)
Used with Counter stay
22-2 and will fit puller 21-3, 21-4, 21-5, 21-40 to 21-46. Please Note: 15-16G is 15mm diameter 16 threads Whitworth 55 degree. Bizarre but true.


$13.20
GA12-3
Kukko GA12-3 Adapter. Size M12 female to M3 male.


$13.20
GA12-4
Kukko GA12-4 Adapter. Size M12 female to M4 male.


$13.20
GA12-5
Kukko GA12-5 Adapter. Size M12 female to M5 male.


$13.20
GA12-6
Kukko GA12-6 Adapter. Size M12 female to M6 male.


$13.20
GA12-8
Kukko GA12-8 Adapter. Size M12 female to M8 male.


$13.20
GA12-10 Kukko GA12-10 Adapter. Size M12 female to M10 male.


13.20
02230021
 New Number:
GA1516-12
KUKKO G1516-12 Adapter Reducer. 
SIZE: (15-16G  Female
Whitworth Threads) to  (R1/2" Male Whitworth Pipe Thread) Adapter.
Used with the 22-0-1 Slide Hammer and will fit puller 21-6, 21-7, and 21-8.

$13.20
VM12-7 Kukko VM12-7 Double Female Adapter.
SIZE: M12 x M7


$13.20
02200152
New Number
VM12-10

KUKKO VM12-10 Double Female Adapter.
SIZE: ( M12-1.75 thread)  x (M10-1.5 thread).
Outside 19mm hex by 35 mm long.


$13.20
02201252
New Number
VM12-1516
KUKKO (02201252) VM12-1516 Double Female Adapter.
SIZE: (M12 Threads)  x  (15-16G Whitworth Threads). 
Outside 24mm hex by 35 mm long.


$13.20
22-0 KUKKO 22-0 Slide Hammer .5Kg  (1.1 pounds). With M10 threads, double female Adapter M10 and adapter M10 male to M7 female. For 21-0 to 21-2 internal pullers and 21-0-E to 21-4-E segment type pullers. Overall length 270mm. Slide Weight 60mm long.

$82.10
(Picture)



22-0-1 KUKKO 22-0-1 Slide Hammer 1.7Kg (3.75 pounds). With M16x1.5 threads. And 3 adapters:
(1.) Double female adapter M16x1.5 to G-1/2" threads. (Part# VM1615-12)
(2.) Adapter male G-1/2" to female 15-16G (Part# GA1516-12). 
(3.) Adapter male 15-16G to female M10    (Part# GA10-1516).
This hammer is to be used with bearing pullers 21-3 to 21-9 and 21-40 and up.

$180.00
(Picture)
KS-22-01-GH Kukko KS-22-01-GH slide hammer with M12x1.75 metric threads. Weight .925Kg.



22-0-2 KUKKO 22-0-2 Slide Hammer. 5Kg (11 pounds) For use with internal pullers 21-89 and 21-90. Threads G1/2" and G3/4" Whitworth Pipe. With adapter (Part #0210954), and nut (Part#22-0-2-52). Length 700mm.  Please note: Call or email us for your discount price with to your address.

$343.20
(Picture)

22-0-2-100 KUKKO 22-0-2-100 Additional add-on 3Kg (6.6 pounds) weight for hammer 22-0-2. Special Order Only! $170.40


KS-22-01 KUKKO KS-22-01 Slide Hammer Unit with M12x1.75 metric threads.  Weight .925Kg. For internal extractors and needle bearing extractors of the type and size 21-1 to 21-8, 21-40 to 21-46, 21-0-E to 21-7-E. Also for parallel keys and dowel pins. Complete with padded case and 6 male adpaters M3, M4, M5, M6, M8, M10 and 3 female adapters M7, M10 and 15-16G. Use this tool when space does not allow for the use of the traditional counterstay.
{Click on individual picture for full view}

SPARE PARTS:
GA12-3    Male Threaded Adapter  M12 to M3 (old #223101)
GA12-4    Male Threaded Adapter M12 to M4  (old #223102)
GA12-5    Male Threaded Adapter M12 to M5 (old #223103)
GA12-6    Male Threaded Adapter M12 to M6 (old #223104)
GA12-8    Male Threaded Adapter M12 to M8 ( old #223105)
GA12-10    Male Threaded Adapter M12 to M10 (old #223106)
VM12-7    Double Female Adapter M12 / M7
VM12-10    Double Female Adapter M12 / M10
VM12-1516    Double Female Adapter  M12 /15x16G
KS-22-01-GH    Slide Hammer
KS-22-02 KUKKO KS-22-02 Slide Hammer Unit. Weight .9Kg. For extracting bushings and components with threads (dowel-pins, parallel-keys, bolts, etc.) Complete with padded case and 6 male adapters: M6, M10, M8x1, M10x1, M12x1, M15x1.5; and 3 female adapters: 15x16G, M10, and M7.


SPARE PARTS:
GA12-6 Male Adapter M12/M6
GA12-10 Male Adapter M12/M10
GA12-81 Male Adapter M12/M8x1
GA12-101 Male Adapter M12/M10x1
GA12-121 Male Adapter M12/M12x1
GA12-1515 Male Adapter M12/M15x1.5
VM12-1516 Female Adapter M12/15x16G
VM12-10 Female Adapter M12/M10
VM12-7 Female Adapter M12/M7
Ks-22-01-GH Slide Hammer
$184.40
(Picture)




______________
Steel Stamping Letter Sets
.
. These stamps are sized by the height of the cutting edge. Depending on the depth of the strike you will need to allow some additional space around the letter. 
.
329-202 Turnus 329-202 steel stamping letter set, 27 stamps, 2mm tall. Special Order Only!!!
329-203 Turnus 329-203 steel stamping letter set, 27 stamps, 3mm tall. Special Order Only!!!
329-206 Turnus 329-206 steel stamping letter set, 27 stamps, 6mm tall.
$75.50
329-208 Turnus 329-208 steel stamping letter set, 27 stamps, 8mm tall.
  

$104.50


331-002K Turnus 331-002K steel stamping lower-case letter set, 27 stamps, 2mm tall. The extra character is the German letter ß (is used for the representation of an /s/ in a syllable onset)
  

Sale!!
$69.00
$112.90

.
Steel Stamping Number Sets
.
.
These stamps are sized by the height of the cutting edge.
.



328-102 Turnus 328-102 steel stamping number set, 9 stamps, 2mm tall. Special Order Only!
$19.50
328-103 Turnus 328-103 steel stamping number set, 9 stamps, 3mm tall.  Special Order Only!


328-104 Turnus 328-104 steel stamping number set, 9 stamps, 4mm tall. Special Order Only!
$22.00
328-105 Turnus 328-105 steel stamping number set, 9 stamps, 5mm tall. Special Order Only!
$23.80
328-106 Turnus 328-106 steel stamping number set, 9 stamps, 6mm tall. Special Order Only!
$26.20
328-107 Turnus 328-107 steel stamping number set, 9 stamps, 7mm tall. Special Order Only!
328-108 Turnus 328-108 steel stamping number set, 9 stamps, 8mm tall. Special Order Only!
$35.50
328-110 Turnus 328-110 steel stamping number set, 9 stamps, 10mm tall. Special Order Only!

$47.30
328-112 Turnus 328-112 steel stamping number set, 9 stamps, 12mm tall.

$56.20
330-0025
Turnus 330-0025 steel stamping number set, 9 stamps, 2.5mm tall. Special Order Only! $25.40
330-501 Turnus 330-501 steel stamping number set, 9 stamps, 1mm tall. Extra strong steel.
$43.50
330-5015 Turnus 330-5015 steel stamping number set, 9 stamps, 1.5mm tall. Extra strong steel.
$29.40
330-5025 Turnus 330-5025 steel stamping number set, 9 stamps, 2.5mm tall. Extra strong steel.  Special Order Only!
$30.60
332-353
Turnus type 332 inspection number stamp. With 6 digits. For RailRoad inspection, etc. Available size 2mm , 3mm, 4mm. Remove the side lock pin to spin the number wheels. Expensive? Yes. Please sit down before you call. Special Order Only!
     
Price on Request
333-030 Turnus type 333 Type Holder Set. Numbers and Letters. Avaiilable size 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm.  Supplied in a plastic case. Expensive? Yes. Please sit down before you call. Special Order Only!

 
Price on Request

.
Steel Stencils
.
327-020
Turnus 327-020 Stencils. 20mm tall. Numbers 0-9.

$16.30



. Stud Extractors
.
52 KUKKO 52 Stud Puller with extra wide working range. 5mm - 19mm
$155.10
( More Info )

53-6
KUKKO 53-6 Stud Remover 6mm.
$62.00
53-7
KUKKO 53-7 Stud Remover 7mm.
 $62.00
53-8
KUKKO 53-8 Stud Remover 8mm.
$62.00
53-10
KUKKO 53-10 Stud Remover 10mm. Chrome-Vanadium steel with chrome plating. Uses 1/2" inside drive or 21mm on the outside. This design uses 3 rollers to grab the stud in either direction.
The image

                    “https://www.samstagsales.com/images/kk53-10x.jpg”

                    cannot be displayed, because it contains errors.

Sale!!
$39.50
$62.00

(Picture)
53-12
KUKKO 53-12 Stud Remover 12mm.
$66.80
53-14
KUKKO 53-14 Stud Remover 14mm.
$80.70
53-16
KUKKO 53-16 Stud Remover 16mm.
$80.70
53-24
KUKKO 53-24 Stud Remover 24mm.
 $568.40
53-30 KUKKO 53-30 Stud Remover 30mm.
$620.20

.
Thread Restore Tool
.
KD714-1 "BUCKI" Thread restore tool. For 12mm to 25mm diameter shaft. For right or left hand threads. *No Longer Available from KUKKO. Sold out.


.
WWrenches- Stubby
.
407-A Stubby wrench set of 10 with plastic holder. Bi-hexagonal drive and same size of opening on both ends. Includes sizes 10mm-19mm. Great for use where access is limited. Benefits include ratchet-like tightening in cramped spaces, quick engagement and release and edge protective profile that grips the flat of the nut. 
**No Longer Available.

      
 

(Picture)
.

Samstag Sales is an authorized distributor of German quality KUKKO and TURNUS tools.
See our Authorization Certificate signed by the Owner Michael Kleinbongartz!


.

KUKKO News




.
HOME Quick Search SEARCH email Samstag
How To Order
Request Quote
Copyright © 1997-2019  Samstag Sales