Volkswagen & Audi Special Service Tools
| USA Phone: ☎ (615)-735-3388 |
|
|
Volkswagen & Audi Special Service Tools
|
|
|
| Samstag Sales stocks a wide range of special
service tools for repair work on VW and Audi cars.
Please have a VW tool
number when you contact
us. For help in finding the correct Volkswagen tool
number, we recommend the [B]
Bentley Publishers workshop manuals. When
possible, please measure the size for your
application. Some VW tools like strut sockets
come in four different sizes. To see our Reference
Page with all the VW tool numbers we can find, click
here.
Email us for a quote on any VW or Audi tool! |
|||
 |
 |
 |
 |
 |
| HOME | Quick Search | SEARCH |
email Samstag | ||
|
|
|
How To Order | Request
a Quote |
||
|
|
Please Note: Our shopping cart is available for your convenience. The shipping is a flat rate calculated by value. Contact us for more shipping options. ( Click for Shipping Rates & Info) | ||||
| We have 2 pages of VW-Audi tools. If you don't find it here, be sure to search Page 1. For more tools not listed on this page, see our Volkswagen Tools Reference Web Page, just click here. | |
| Quick Search | |
| Quick Search |
|
Search
Tip: an easy way to search this web page is
to use the "Find in Page" feature built into your
browser. A fast way to open the search
box is to hold down your (CTRL)
key and type the letter "F" on
Windows.
Or  +"F"
keys on a Mac. |
|
| Item Number |
{Click on the price to see a picture. ER=Elora, HZ=Hazet, SW=Stahlwille KK=Kukko, MA, MT=Matador} |
|
||||
| .************ |
|
. | ||||
|
10-201 |
Flywheel Retainer. Needed when installing
the dual mass flywheel. |
|||||
|
10-203 |
Oil seal install set, for Crankshaft
pulley, intermediate shaft, camshaft oil seals.
|
|||||
| Volkswagen 10-222B | Engine Support bridge. Replacement for 10-222A |
|||||
|
|
Flywheel Lock Adapter. |
|||||
|
2068A |
TDC adjustment gauge to be used with engine
removed, diesel only. With scale. |
|||||
|
2534 |
Hazet Brass mandrel bushing-bearing driver, 200mm (8") x 20mm (13/16") long | |||||
|
3067 |
Flywheel Lock |
|||||
|
3088 |
Oil seal fitting sleeve. 2.75" in diameter.
Discontinued.
|
|||||
|
3090 |
Connecting Rod Support. The tube section is
130mm long.
|
|||||
|
3092 |
Puller used for removing cylinder sleeve. No Longer Available | |||||
|
3099 |
Spur Belt Spreading Tool. Required to lock
spur belt sprocket on all 4 cylinder watercooled
inline VW engines. |
|||||
| Volkswagen 3198 |
Volkswagen 3198 Puller for
removing vibration damper and pulley. No longer available. We have one in
stock. Note: No tool board
sticker included.
 |
$75.00 |
||||
|
3265 |
Seal installer. Used to install front
crankshaft oil seal, V6 engine.
|
|||||
|
3308 |
Sensor tool - used to adjust speed sensor RPM on V6 engines. |
No
Longer
Available |
||||
|
3366 |
Bracket for Chain Adjust Passat from
1997.
|
|||||
|
T10053 |
Assembly Tool. Guide and press sleeve for
installing crankshaft oil seal. Set includes
T10053/2 bolt.  |
|||||
| Volkswagen T10134 |
Assembly Tool
Number 4M-310 for
setting the sealing flange on engines with integrated
sender wheel. Golf 2004 and up, Audi A3 2004 and up,
Touran 2004 and up. We will supply an
aftermarket tool from (MMMM)
Brand from Europe. Please check your service
manual for this tool number. NO instructions are
included, please be sure you have a service manual.
This is a job for an experienced mechanic. Out of Stock.
 |
Price on Request (Picture) |
||||
| Volkswagen T10184 |
Volkswagen T10184 Seal
Installer for renewing input shaft oil seal. |
Price on Request |
||||
| Volkswagen T10211 |
Used for removing and installing the
multi-pin connector on the Touareg V10. |
Price on Request |
||||
| Volkswagen T10225 |
Top Dead
Center Wrench. For Toureg and Transporter used to set
5 cylinder diesel engine to TDC. Discontinued. We have one.  |
$57.50 (Picture) |
||||
|
T10255 |
Locking tool. For removal and installment
of balance shaft module. Applicable on Jetta (A4) 2.0
l, 4-Cyl. 2V TDI PD. |
|||||
| Volkswagen T10353/1 |
Volkswagen T10353/1 Seal
installer, intermediate shaft. Used to install
intermediate shaft seal on 1.8 and 2.0 generation III
TFSI engine. |
$24.99 |
||||
|
T10368 |
Timing chain
cover press piece. Used to remove or install the
lower timing chain cover. Audi A3 2004> 4-cyl. gas
direct injection 1.8, 2.0 liter turbo 4V engine with
chain. |
$19.99 (Picture) |
||||
| Volkswagen T10394 | Volkswagen T10394 Puller.
Used for the removal of balancer shaft, to be used
with special tool T10133/3. Golf 2004>, Passat
2006>, EOS 2006>, Audi A3 2004>, Audi A4
2008>, Audi TT 2007>, Audi A5 2008>. 4-cyl.
gas injection engine 1.8, 2.0 liter. |
Price on Request |
||||
| Volkswagen T40071 |
Chain Tension Lock Pin.
Audi A6 (C6) with direct injection engine 3.2L 4V. Set
of 5 tools. Distance between pins is approximately
23mm, overall length 75mm (3").  |
$149.99 |
||||
| Volkswagen T40128 |
T40128 Balancer
Shaft Adjustment Tool. Used for setting the balancer
shaft on 10 cylinder gas direct injection 5.2 ltr. 4
valve engines. |
Price on Request |
||||
| Volkswagen T40243 |
Volkswagen
T40243
Special
tool used to loosen timing chain tension. All VW and
Audi vehicles with 1.8 liter and 2.0 liter TFSI Engine.
Length 58cm or 23" inches.  |
$329.99 |
||||
| Volkswagen
T40265 |
Chain
Tensioner Locking Pin. Used to lock the oil pump chain
tensioner as found on 1.8 and 2.0 Generation III
engines. 4 cylinder TFSI direct injection. |
$19.99 (Picture) |
||||
| Volkswagen T40267 |
Volkswagen T40267--Set of 2
Chain Tensioner Locking Clips. Length 40mm. |
Price on Request (Picture) |
||||
| Volkswagen T40297 |
Volkswagen T40297 Timing Chain Tensioning Key.
On 6 Cylinder 3.0 Liter, 4 Valve supercharged direct
injection engine, Generation IV. 
 |
Price on Request (Picture) |
||||
| Volkswagen T50010 |
Euro Version Seal
Installer Volkswagen T50010.
 |
Price On Request |
||||
| PP 51-216-301 |
Paschke Profitec Puller for crankshaft
vibration damper. 4 and 5 cylinder VW and Audi, AAB,
ACV, AFF, AFN, HHU engines.  |
|||||
|
|
||||||
| 2585-1
&
2585-2 Set |
HAZET Spring
Tensioner for exhaust clamps, Golf 1.5L-70PS, Diesel
1.5L-50PS, 1.6L-54PS, Jetta 1.5L-70PS, Diesel
1.6L-54PS, Scirocco 1.5L-70PS and the HAZET
T-handle with hinge joint, 3/8 drive, 340mm long. Similar to
Volkswagen (3049) NO
LONGER AVAILABLE FROM HAZET.
See Gedore
1.79/1 below. |
|||||
| Hazet 4684-2 |
Hazet Exhaust Pull Hook.
17mm half round. |
See Hazet Page |
||||
| Volkswagen 3049A Used |
Here is a
Vintage Volkswagen tool number 3049A. This is an
exhaust clamp spreader. It is marked "TBN" and Made in
Germany. This tool is high quality and heavy
duty. It has some finish wear and wear on the 3/8"
drive ends. It will turn easily. Lot's of German
companies made this tool in the past. But this
tool is getting hard to find now. Here is the original
tool in good used working condition. This tool
is perfect for spreading the exhaust manifold spring
clips. About 5-3/8" long. Please check your Bentley
Publishers Service Manual for this tool number.
NOTE: This
tool is no longer available from Volkswagen, we have
this 1 used tool for sale. (LOC: VW44G) SOLD! Looking
for another one. |
$39.00 SOLD! |
||||
| Volkswagen 3140A |
Exhaust Wedge
Set. Special
Order Only. |
Price on Request |
||||
| Sir Tools VA6007 |
Exhaust clamp
spreader. Similar to
Volkswagen (3049) and
HAZET ( 2585-1).
No Longer
Available
 |
|||||
Gedore 1.79/1 (3049) |
Gedore Germany
1.79/1 Spring Tensioner for exhaust clamps, Golf
1.5L-70PS, Diesel 1.5L-50PS, 1.6L-54PS, Jetta
1.5L-70PS, Diesel 1.6L-54PS, Scirocco 1.5L-70PS . Similar to
Volkswagen (3049) and
HAZET ( 2585-1).
*No longer available from Volkswagen, HAZET or Matador. Gedore of Germany still makes this tool! Order Code: 8112540  |
$159.99 |
||||
| Volkswagen T10385 | Volkswagen T10385 XZN 10
Socket. Used for removing and installing exhaust gas
recirculation pipe on 4-cyl. diesel engine (2.0 L
engine, common rail). Used when changing toothed belt on
2.0 liter TDI CR - Audi A3. |
$27.50 |
||||
|
Volkswagen
|
Volkswagen
T10401 Exhaust Gas Recirculation EGR Temperature
Sensor Socket 14mm 3/8" Drive 63mm (2-1/2") long.
Needed on the 4-cyl. diesel engine (2.0 liter common
rail) Engine Code = CBEA  |
$37.50 (Picture) |
||||
|
Volkswagen
|
Volkswagen Special Tool T40220 used on the
Catalytic Converter Audi A5 2008> with 6-speed
manual gearbox 0B4 and 4WD, and Audi A8 (D4 Chassis).
This is the official VW Factory Tool. It is a 3/8"
drive swivel socket extra slim 12mm that is about
110mm (4-1/4" inch) long. |
$59.00 | ||||
|
|
||||||
| Hazet 798-2 |
HAZET Clic
Pliers. 180mm long. Fixed jaws. For CLIC Clamps. When
removing the clamp, only apply enough force to unclick
the clamp. Using too much force could bend the clamp
and ruin
it. Turn the pliers around 180 degrees to install the
clamp. "Similar to factory tool VAG1273". |
See
HAZET |
||||
| Esgen 12941 |
Esgen Hose Clamp Plier for
fuel line and tank vent tubes. For 8-18mm hose.
190mm. 165g. Nickel Plated. Similar to HAZET tool 798-14 
 |
|||||
| Hazet 2225-20 H |
Hazet
Screwdriver
bit
with hole, 5-Star, 1/4" drive. 25mm long. Used for the
screwed connection of the plug-in pump on Mercedes-Benz
and also the air flow sensor on VW. Please Note: Some Euro
customers report needing a larger 25H size. Please measure for
your application. See Esgen SFB-S-8
to see all available sizes. |
See Hazet Page |
||||
| Lang 71305 |
Lang 71305 Adapter for
connection to the LH Jetronic fuel system. Used on
Volvo and any VW with this thread size. M14x1.5mm
threads. |
$14.99 (Picture) |
||||
|
|
Trio of adaptors that are required, together
with K-Jetronic tester V.A.G 1318, for measurements on
the fuel injection systems: Monojet and Digifant in
Golf/Jetta, Audi 80 and Audi 100. |
|||||
|
2012A |
Removal and assembly tool. This tool is used
for removing the fuel gauge sender. About 80mm in
diameter. 1/2" drive.
 |
$149.99
|
||||
|
3214 |
Special wrench to remove fuel pump. 1/2" drive. Hard plastic. This tool will apply limited torque. Be sure the tool is inserted correctly and used carefully. Do not force the tool - it will snap to prevent damage to the sealing surface! We will not replace a broken tool. NO LONGER AVAILABLE!!! | |||||
|
3217 |
Special wrench for fuel sending unit. 1/2"
drive 139mm. Some VW/Audi and Porsche
Boxster/911. Factory Tool. |
|||||
| Volkswagen 3218 |
Volkswagen 3218 Fuel
gauge sender unit wrench 92mm. Used for
removing/installing the fuel gauge sender unit. |
$277.50 (Picture) |
||||
|
3307 |
Special fuel pump wrench. 375mm in length.
722g. 1/2" drive.
 |
|||||
| Volkswagen 3359 |
Diesel
Injection Pump Lock Pin. Used to lock diesel timing
when changing the timing belt. 1.9L TDI engine ALH |
$39.99 (Picture) |
||||
|
T10202 |
Special wrench for fuel sending unit, 3/8
drive. 125mm across. This is a replacement for tool
old # 3087.
|
|||||
|
T10056 |
Assembly sleeves used when installing "O"
rings for fuel pump.
 |
Price on
Request |
||||
| Volkswagen T10366 |
TDI engine Injection
Pump Socket. Small socket with 1/4" drive and Triangle
Tip. Needed to repair seal of the
distributor injection pump. About 25mm (1") long.
 |
$29.99 |
||||
| Volkswagen T40020 |
Fuel line release tool
for opening quick acting couplings of fuel lines in fuel
tank. |
Price on Request (Picture 2) |
||||
| Volkswagen T40055 |
Union Nut
Socket for 8 cylinder 4.0 4V TDI Common Rail. Also 6
cylinder 3.0 4V TDI Common Rail. With 6 point 17mm
open ring. With 3/8" drive. |
$59.99 (Picture) |
||||
|
|
Special tool that is used for removing and
installing union nut on fuel gauge sender. For Audi A6
2005, Audi A8 1994, Audi A8 2003. Replaces tool 3342. 
 |
Price
on Request |
||||
| Volkswagen T40245 |
Volkswagen T40245 Locking
Pin for locking chain sprocket on high-pressure pump.
About 85mm long. For Audi Q7 2007>,
6-cyl. TDI common rail 3.0 L 4V engine (Generation II)   |
$26.75 (Picture 3) |
||||
| Volkswagen T40248 |
Volkswagen T40248 High
Pressure Pump Shaft Holder. Used on Audi A7 2011>,
Audi Q7 2007> for 6-cyl. TDI common rail 3.0 L 4V
engine (Gen II) NOTE: Please inspect the number of splines before ordering. This is the large wrench with 39 splines.  |
Price on Request |
||||
| Volkswagen T40292 | High Pressure Pump Shaft Holder
Wrench. Used on 6-cylinder 3.0 Liter 4V TDI common
rail engine (generation II) Touareg 2010 >, Audi A4
2008 >, Audi A6 2011>, Audi A7 2011 >, Audi
A8 2010 >, Audi A5 2008 >, Audi A5 Sportback
2010 >, Audi Q5 2008 > NOTE: Please inspect the number of splines before ordering. This is the small wrench with 24 splines.  |
Price on Request (Picture 2) (Picture 3) |
||||
|
|
Suction Pump. For bleeding the non-return
feul system found in Audi A4 with 1.8 Liter turbo
engine code AMB and VW Touareg with V6 4valve engine
code BAA, BMX. Plastic bottle and hose. Trigger
with lock. |
|||||
|
|
Fuel Injectors |
|||||
| Volkswagen 2064 |
Volkswagen 2064 locking
pin for holding diesel injection pump gear. |
$27.50 |
||||
| VA6020 |
Sir Tools O-Ring Spreader.
Needed to properly install rubber seal ring of CIS
fuel injector. *
No longer available. |
$9.99
|
||||
| Volkswagen T10054 |
Volkswagen T10054 Long
Reach XZN-6 Socket for Diesel Pump Injector found on
VAG PD type diesel engines. About 4" inches
long. Used to remove the pump injector clamping block
fastener.
 |
$27.75 | ||||
Volkswagen T10055 |
A puller
Unit Injector
used when removing
the fuel injector from
the cylinder head. |
$149.99 (Picture) |
||||
| Volkswagen T10133A |
Injector Removal Set. With case. Used to remove and install high pressure injectors, and to install combustion chamber seals. Improved "A" version with more tools. Please Note: This set has been replaced by the updated T10133C Set. See row below. Injector Removal Set UPGRADE. You would need to purchase the T10133/18A and T10133/19 and T10133/20 to upgrade the T10133A to the T10133C. | |||||
| Volkswagen T10133C |
Injector
Removal Set TSI. Used to remove and install high
pressure injectors, and to install combustion chamber
seals. 
 Contents of the set: T10133/1 – puller T10133/2A – puller T10133/3 – sliding hammer T10133/4 – brush T10133/5 – assembly cone T10133/6 - assembly sleeve T10133/7 – calibration sleeve T10133/8 – calibration sleeve T10133/9 - Body T10133/10 – adapter T10133/11 - Sleeve, supplement set T10133/12 – wrench,supplement set T10133/13 – Cone , supplement set T10133/14 – sleeve, supplement set T10133/15 - puller, supplement set T10133/16A – removal tool T10133/17 – calibration sleeve T10133/18A – sleeve T10133/19 – puller T10133/20 - puller T10133/21 - puller bolt |
|||||
| Volkswagen T10133/5 |
Volkswagen T10133/5
Assembly Cone. Replacement component for T10133,
T10133A, T10133B Injector/Combustion Chamber Seal Tool
Sets. |
Price on Request |
||||
| Volkswagen T10163 |
Puller for Unit Injectors. For 4 cylinder diesel engine with 4-valve. Touran 2004 and up, Audi A3 2004 and up. *Special Order Only! | Price
on Request (Picture) |
||||
| Volkswagen T10377 |
O-Ring
Assembly Sleeve, for 4 cylinder diesel 2.0L common
rail with Piezo type Injector. 100mm long, 22mm
diameter. |
$19.99 (Picture) |
||||
| Volkswagen T10415 |
Here is a Volkswagen T10415
Magnetic Injector Puller 2.0 Liter Common Rail VW
Engines. This is the official factory tool supplied by
Volkswagen of Germany. For Golf 2009 and up, Audi A3
2013 and up. |
$169.99 (Picture) |
||||
| Volkswagen T40195 |
Injector Seal
Remover. On VW-Used
to remove cylinder head cover seal.
(4-cyl. diesel engine 1.6L engine, common rail).
And used on Audi A8 2003> 8-cyl. gas direct
injection engine 4.2L 4V engine, for
removal
of shaft seal of auxiliary drive. *Special Order.
 |
Price on Request (Picture) |
||||
| Volkswagen T40270 |
Assembly
Mounting Install and Remove. Long XZN-12 Socket. Audi
A4 2008 and up. Audi A5 Cabriolet 2009 and up, Audi A5
Coupe 2008 and up, for 4-Cyliner 1.8L and 2.0L 4 valve
TFSI direct injection Generation III. |
$39.75 |
||||
| Volkswagen
VAS5301/07 |
Injector Socket, Long 27mm.
1/2" drive 12 point. Extra room inside. Same as HAZET
4555N as used on Mercedes. See our Mercedes page and
look for 4555N. |
See Mercedes |
||||
| Hazet 4560 |
HAZET Wrench, for fuel lines on diesel injection nozzle. 17mm both ends. For VW-Audi diesel engines 1.6L 4-cyl, 2.0L 5-cyl, 2.4L 6-cyl. Similar to tool 303 | |||||
| Stahlwille
51-27 |
Stahlwille. Extra Deep 27mm, 1/2" drive socket for injection nozzles on diesel. Not for TDI, similar to Volkswagen 3376. | See Stahlwille Page |
||||
| Stahlwille
51-30 |
Stahlwille. Extra Deep 30mm, 1/2" drive socket for injection nozzles on diesel. | See Stahlwille Page |
||||
| . |
|
. | ||||
| Volkswagen 3077 |
Volkswagen
3077 Seal driver for installing shift shaft oil seal
for 4 and 5 speed manual 091/1 and 094 transmissions.
With 1/2" drive. And 19mm 12 point open end. |
$97.50 |
||||
| Volkswagen 3267 |
Volkswagen 3267 Assembly
ring used to preload needles when inserting one way
clutch. |
$39.99 |
||||
| Volkswagen 3274 |
Pinion shaft adapter
used to remove the pinion shaft on 096 transmission.
 |
$49.99 |
||||
| Volkswagen 3285 |
Gearshift lever gauge for
adjusting selector mechanism. |
$39.99 |
||||
| Volkswagen 3421 |
Volkswagen 3421 Shift
Lever Adjusting Fixture. No longer available   |
|||||
| Volkswagen T10084A |
Bearing
Installer
Press Plate. For pressing output shaft bearing. |
Price on Request |
||||
| Volkswagen T10027A | Locking pin for adjusting selector
mechanism.
|
|||||
| Volkswagen T10090 |
Volkswagen T10090 Seal
installer used for renewing selector shaft switch on
vehicles with 09A/09B 5-speed automatic gearbox. |
$55.00 |
||||
| Volkswagen T10203 | Volkswagen T10203 Breather
Tube Tool. Used for fitting breather tube into transfer
box. |
$37.50 |
||||
| Volkswagen V/175 A |
This socket is used to remove and install bolts from the engine to the gearbox. It is a thin wall 15mm socket with 1/2" drive and spring ball to hold the bolt head. NO Longer Available. | |||||
| Volkswagen T10303 |
Volkswagen T10303 Gearbox
Clutch Assembly Retaining Bar used on Direct Shift
Gearbox (DSG) 02E with 6 speed.  |
$109.99 (Picture) |
||||
| Volkswagen T10374 |
Setting Tool for release
bearing position K1 and K2 of 7-speed dual clutch
gearbox 0AM. |
Price
on Request (Picture) |
||||
| Volkswagen T10406 |
Mechatronic Gearbox
Alignment Bolt. Used on 7-speed dual clutch
gearbox 0AM. Golf 2004> , Golf 2009>, Audi A3
2004>, Eos 2006, Passat 2006> Passat CC 2009>
.
|
$19.99 (Picture) |
||||
| Volkswagen T10407 |
Mechatronic
Gearbox Mounting Lever. Used on 7-speed dual clutch
gearbox 0AM. Golf 2004> , Golf 2009>, Audi A3
2004>, Eos 2006, Passat 2006> Passat CC 2009>
. Length 260mm. Metal shaft with plastic handle.
 |
|||||
| Volkswagen T10524 |
Volkswagen
T10524 Dual Clutch 7-Speed Gearbox Retaining Bar.
Gearbox 0BH and 0BT. About 135mm (5-1/4"
inch) long. For Tiguan 2008 and up, Transporter
2010 and up.  |
$49.99 (Picture) |
||||
| Volkswagen T40008 |
Volkswagen T40008 Seal
installer used on 5 and 6 speed manual gearbox 02M,
4-wheel drive, during the assembly of the shaft seal
ring on the drive shaft. |
Price on Request |
||||
| Volkswagen T40097 |
Volkswagen T40097
Driveshaft socket used for loosening and tightening the
nut on the drive shaft. 6-speed manual gearbox 0A3,
4-wheel drive.  |
Price on Request |
||||
| Volkswagen T40105 |
Volkswagen T40105 Seal
installer used for renewing propshaft flange oil seal on
6-speed manual gearbox 02X, 4-wheel drive. |
Price on Request (Picture 2) |
||||
| Volkswagen T40107 | Volkswagen
T40107 Double Shaft Seal Tool for Drive Pinion of
Multitronic Gearbox 01J. About 8 inches long.   |
Price
on Request (Picture) |
||||
| Volkswagen T40151 | Volkswagen
T40151 centering pin used for centering
manual gearbox and semi-automatic gearbox
(R tronic). For Audi R8 2007> |
$61.99 (Pic 2) (Pic 3) |
||||
| Volkswagen T40203 |
Volkswagen T40203
Locking Button Removal Tool. Used for positioning the
locking button on the selector lever handle. For Audi
TTS 2007>, Audi A3 2004>, Dual Clutch Gearbox 02E,
four wheel drive.
|
$69.99 |
||||
| Volkswagen T40217 |
Volkswagen
T40217 Counterhold Tool. For side shaft of 6-speed
manual gearbox 0B2 four wheel drive. For example Audi
A4 2008 and up, Audi 15 2008 and up, Audi A5 Cabriolet
2009 and up, Audi Q5 2009 and up. Length 170mm Height 64mm.  |
$339.99 |
||||
| Volkswagen T20097 |
Volkswagen
T20097 Seal Installer on Gearbox Side. 4-cyl injection
engine (1.8l and 2.0L engine with chain drive). 86mm
diameter. |
$94.50 (Picture) |
||||
| Volkswagen VAS6617-12 |
Volkswagen VAS6617-12 Gearbox Adapter used to fill
pressurized gearbox with oil. For Audi A6 from 2011
and up with 6-speed dual clutch gearbox. About 107mm long.  |
$59.99 (Picture) |
||||
| Volkswagen VW244B |
VW244B Bearing Driver Press tool. Used to
install the Syncro Hub and circlip for drive flange on
5 Speed gearbox 020 and 4 speed gear box 091. About
235mm long. Outside diameter 42mm, Inside diameter
32mm. |
Price on Request (Picture) |
||||
| ★ | ||||||
| FourM 4M-051 (VW 381/14) |
4M-051 Cone socket for grooved nut of
pinion bearing on Type 2 air-cooled VW Bus. Some Type 1 VW, and some
dune buggy with VW engines. Heavy Duty Steel Version.
With 32mm hex drive. It measures about 89mm diameter
inside the tool at the longest distance. This is for
the ring nut with 30 teeth. Please inspect your nut
before ordering. Made by (MMMM) Brand from Europe. Similar to
old factory tool VW381/14. |
$129.99 (Picture) |
||||
| ★ | ||||||
| FourM 4M-052 |
Pinion Assembly Tool. For drive
pinion nut on 091 transmission. It is about 45mm
diameter inside the tool at the valley between the
teeth. This is for the nut with 15 teeth. Please inspect your nut before ordering. Used in place of factory tool 2052. For old Type 2 VW.  |
$79.99 |
||||
| FourM 4M-052.C |
Pinion
Assembly
Tool. Spline Drive Nut. 32mm hex. Similar to
part found in factory set 2052.  |
$39.99 |
||||
| FourM 4M-053 (VW 381/15) |
4M-053
Differential Socket for Independent Rear Suspension
Type 2 Bus. Super heavy duty, chrome plated steel.
With 24 teeth and 32mm hex drive. Around 80mm
diameter. (MMMM)
Brand from Europe. Similar to old factory tool
VW381/15 |
$99.99 (Picture) |
||||
| Volkswagen VW391 |
Drive
Flange install tool for the 5 speed type 020 gearbox.
|
|||||
| VW401A | Special Press
Plate for pressing gears, etc.  |
Price
on Request (Picture) |
||||
| VW402A | Special Press Plate for
pressing gears, stripping bearings etc. Special Order |
Price on Request |
||||
| VW 3038 | Special
Wrench for manual transmission. Adjust shift fork for
the 5th gear. Aftermarket Tool. No longer available from VW. No
Longer available in the aftermarket. |
$39.99 (Picture) |
||||
| . |
|
. | ||||
| Hazet 992SLG-T45 |
Hazet Extra-long screwdriver socket for intake bridge Ford Scorpio 2.4, 2.8 and 2.9 injection engine. VW Passat since April 1989 gearbox type 02 A, 1.6 1.8 & 2.01. 100mm in length. 7.82mm TORX. | |||||
| T10197 | Volkswagen
T10197 Intake Manifold Socket. 2004 Touareg V10
Engine. Tip is 6mm Ball End Hex. Length 230mm
(9" inch). |
|||||
| Volkswagen T10405 |
Volkswagen T10405 Special 1/4" drive T30 Ball
End Torx socket used to dismantle and mount the intake
manifold on Golf 2009> with 4 cylinder diesel engine 1.6 Liter common rail. About
140mm (5-1/2") Long. |
$29.00 | ||||
| Volkswagen T10501 |
Volkswagen
T10501 Socket XZN-10 with Ball End Tip. For Audi A3
2013 and up, Golf 2013 and up, with 4 Cylinder TDI
Common Rail 4 Valve 2.0 Engine with
Turbocharger. |
$49.99 |
||||
Volkswagen T40159 |
Special ball end XZN-8
socket, 3/8" drive. For removing and installing intake
manifold on 4-cylinder, diesel engine 2.0L
engine, and 8-cylinder gas direct injection engine
4.2L - 4 Valve. About 133mm Long. Also used on oil
drain plug.
 |
|
||||
| VAG1669 | Special 6mm hex bit, 248mm (9 3/4") long,
1/2" drive, for Intake pipe Audi 200 5-cyl
Turbo. VAG1669 similar to HZ 2584-1.  |
$45.00 (Picture |
||||
| . | . | . | ||||
| . |
|
. | ||||
| T01900 | Crank Lock for tooth belt. Used to
remove crankshaft center mounting bolt. For 5
Cylinder Volkswagen Marine Diesel Engine ANF,
ANG, ANH, BCT, BCU, BCV,
BTW. NOTE:
For a substitute tool that we keep in stock see the 4M-037 tool.
It will be harder to use, but customers say it will
get the job done in a pinch. Special Order Only. The tool you receive could vary from our picture.  Outside Diameter of Ring: 65mm Inside Diameter of Ring: 46mm Width of Ring Gap: 21mm Depth of Gap: 26mm |
|
||||
| T01901 | Top Dead Center "TDC" Locating Pin. For 5
Cylinder Volkswagen Marine Diesel Engine ANF,
ANG, ANH, BCT, BCU, BCV,
BTW. *Special
Order Only. The tool you receive could vary from our
picture. |
Request |
||||
| . |
|
|
||||
|
Hazet 985-17 |
HAZET Socket, Oil Service, VW, 17mm hex key, 1/2 drive, for gearbox. | |||||
|
Hazet 2168 |
HAZET oil filter socket, for Audi and
Volkswagen Diesel and Turbodiesel. *No longer available.
Sold out!
 |
|||||
|
Hazet 2169-1 |
HAZET Wrench, Oil Service, Porsche
911 and some Audi/VW Diesel cars. Made of a special
magnesium alloy metal casting. 92mm with 15 flats.
With 1/2" drive. |
|
||||
|
Hazet 2169-32 |
HAZET Socket, Oil Service, shallow
32mm, 3/8" drive
 |
|||||
|
Hazet 2169-36 |
HAZET Socket, Oil Service, VR6 engine, shallow 36mm, 3/8" drive | |||||
Hazet 2528-10 |
HAZET Special T-Handle Socket for
Oil Service. To remove the oil pan. With 3/8"
drive, size 10mm. With swivel joint and
T-handle, Chrome-Vanadium and surface chrome-plated.
250mm long. Special Order Only! |
$98.21 (Picture) |
||||
|
Hazet 2567-1 |
HAZET Wrench,Oil Service, VW, 19mm
box-17mm hex key *No
longer available!
|
|||||
|
2567-16 |
HAZET 2567-16 Socket, Oil Service,
Gearbox Drain, Porsche Boxter, Audi A4, A6. 1/2" drive
XZN. Similar to Volkswagen 3357.
|
|
||||
|
2003 |
Tool used to install oil seal on flywheel
side. Includes 2003/1 and 2003/2A and 2003/3.
 |
Price
on Request |
||||
|
2080A |
Sleeve used to install crankshaft oil seal
on pulley side of 5-Cylinder engines. Also needed to
repair 01A transmissions.
|
|||||
| Volkswagen 3185 |
T-Handle with
swivel socket. With 10mm swivel socket and 3/8" drive
on top and T-handle. Overall length 250mm (9-3/4").
T-handle is 120mm wide. |
Price on Request (Picture) |
||||
|
3200 |
Box spanner for oil pressure sending unit. 1/2" drive, 3 tabs 10mm wide. NO Longer Available. | |||||
|
3241 |
Volkswagen 3241 Camshaft seal installer
kit. Used to press in camshaft oil seals on V6 engine. |
|||||
Volkswagen 3241/4 |
Replacement part for seal
installer |
Price on Request (Picture) |
||||
|
3295 |
Installing oil seal tool. Special order.
|
|||||
|
3357 |
Socket, 1/2" drive, Oil Service,
Gearbox Drain, Audi and VW. Size XZN-16 with hole. See
also HAZET 2567-16.
|
|||||
| Volkswagen 3382 |
This drift provides safe and easy means to
installing right-hand flange shaft oil seals.
Approximately 6.5" tall. Listed by VW for Audi A4
Automatic Transmission 01V with front wheel drive.
Heavy-duty black plastic.
 |
|||||
| Volkswagen 3417 |
Oil filter tool for New Beetle 1999 and up,
Golf 1998 and up, Passat 1997 and up. It was made by
HAZET of Germany. With 1/2" drive. It has 14 inside
flats. 74.4mm. Similar to HAZET 2169 used on BMW
and Mercedes, but this version has the larger 1/2"
drive specified by VW.
 |
|||||
| Volkswagen T03005A |
Oil Pump
Mounting Plate for Audi TT 2007 and up. 5 cly 2.5L
direct gas injection. |
Price on Request (Picture) |
||||
| Volkswagen T10022 |
Assembly tool. Used when installing oil pump.
NO LONGER
AVAILABLE.
|
|||||
| Volkswagen T10058 |
Special 5mm hex ball end
socket. 9" long, 3/8" drive. For oil pan
bolts. Replacement for old tool 3249 |
|||||
| Volkswagen T10549 |
Plastic Sump Oil
Drain tool. For Golf 2013 and up , various Audi model
with 4-cylinder direct injection, 2.0 liter, 4V,
turbocharger engine. With chain drive (generation III)
Jetta Hybrid. Screwdriver handle with I-Beam type tip.  |
Price
on Request (Picture) |
||||
| Volkswagen T40057 |
Oil drain adapter. Used to drain oil from
filter housing. Why do you need this tool? See
these pictures. The filter housing separates in the
middle. If you don't drain it first you will have oil
spilling everywhere when you remove the housing. For engine codes: AXW, BGB,
BLX, BLR, BLY, BVX, BVY, BVZ, BWE.
|
|||||
| Volkswagen T40175 |
Volkswagen T40175 Socket
and Jointed Extension, 24mm. Used for removing and
installing the oil pressure switch on "F1" on 6
cylinder TDI common rail 2.7 Liter and 3 Liter 4 valve
engines. For example Audi A6 2011 and up, and Audi Q7
2007 and up. |
Price on Request |
||||
| Volkswagen T40363 |
Volkswagen T40363 Socket
24mm. Special socket required for the removal and
installation of the oil pressure sender G10. The
design of the connector housing on the oil pressure
sender requires an internal diameter that deviates
from the standard. This is important to ensure
sufficient clearance. |
Price on Request |
||||
| Volkswagen T40376A |
Fitting tool T40376A used
for installing the valve stem oil seal with VAS 5161.
These tools ensure that valve stem oil seals are fitted
securely. 5cyl. TFSI 2.5L (EA855 evo), Audi TTR 2015> |
Price on
Request |
||||
|
Matador 4086 00 01 |
Matador Oil
filter
tool for VW/Audi diesel engines. Please follow the
factory service procedure. This tool is 1/2" Drive.
Made with chrome vanadium steel and matt chrome
finish. About 48mm (2-7/8" inch) long. With 42mm
(1-11/16" inch) wide bar. *No longer
available from Matador, we only have a few left.
 |
|||||
| VAG1342 | Oil Pressure Gauge. Other
adapters may be needed in addition to this gauge. Not
included. Consult your service manual for a part
number. |
Price on Request |
||||
| VAS 1342/03 | Adapter for oil pressure gauge VAG1342.
No Longer
Available
|
|||||
| VAS6753 | Oil filter tool for the Touareg V-10
TDI Diesel. For filters with 9 half round slots.
Turn with your 1/2" drive tool or 24mm wrench. Pressed
steel construction. This tool is a replacement for old
tool T10192. |
$54.00 (Picture) |
||||
| VW201 | Oil pump puller for pulling oil pump body
with or without engine installed. Also for Torque
converter bushing, and installing drive flange oil
seals on transmission. |
$337.50 (Picture) |
| xxxxxxxxxxxx |
|
.
|
||||||||||||||||||||
| Hazet 4680-3 |
HAZET Extra Strong, thick wall, Oxygen Sensor socket 1/2" drive 22mm, slotted side. | |||||||||||||||||||||
| Volkswagen 3337 |
Oxygen
Sensor
Set
with 9 parts. This set includes the following:
Call or eMail with
your shipping address to order!
 |
Price
on Request (Picture) |
||||||||||||||||||||
| Piston | ||||||||||||||||||||||
| Volkswagen Matra VW123c/1 |
Vintage
Volkswagen Matra VW123c/1 Piston Ring Compressor 85.5mm to
86.5mm Piston, Type 3 VW Square Back and Fast
Back, Marked 5375. Made in Germany. No longer available |
$75.00 |
||||||||||||||||||||
| Volkswagen 3091 |
Piston pin mandrel. NO LONGER AVAILABLE | $57.50 (Picture) |
||||||||||||||||||||
| Volkswagen 3159 |
Piston Pin Reamer. 270mm long. NO LONGER AVAILABLE | $189.99 (Picture) |
||||||||||||||||||||
| Volkswagen 3278 |
Piston Install
tool VR6. (not for 3.6L) |
$94.50 (Picture) |
||||||||||||||||||||
| Volkswagen T10147 |
Piston Install tool for
Touareg V10 engine
|
Price on Request (Picture) |
||||||||||||||||||||
| Volkswagen T10333 |
Piston Installation Funnel. Used on 3.6 Liter 6 Cylinder with direct injection. Special Order Only! | Price on Request |
||||||||||||||||||||
| Volkswagen T10343 |
Piston Installation Tool. Used for inserting
pistons on the 6-cyl. injection 3.2 liter engine (direct
injection). |
Price on Request |
||||||||||||||||||||
| Volkswagen T40347 |
Piston Installation
Funnel. Used to install the piston in the cylinder head.
Supplied in a plastic case. For Audi A4 2016> 4-cyl.
direct injection 2.0I 4V TFSI (Generation III). |
Price on Request |
||||||||||||||||||||
| Volkswagen T40369 |
Piston Installation Funnel. Used to install the piston in the cylinder head. Supplied in a plastic case. For Audi A4 2016> 6-cyl. direct injection 3.0I TFSI 4V EA 839. | Price on Request |
||||||||||||||||||||
| Volkswagen T90004 |
Piston Installation
Funnel. Used to install the piston in the cylinder head.
Supplied in a plastic case. For Audi A8 2018> and
Panamera 2017> 8-cyl. direct injection 4.0l 4V EA
825. |
Price on Request |
||||||||||||||||||||
| Volkswagen SET850 |
Piston Installation Tool
for Audi vehicles with 2.0 TFSI and 2.0 FSI engines
82.5mm bore. |
Price on Request |
||||||||||||||||||||
| Volkswagen SET850 |
Piston Installation Tool
for Audi vehicles with 3.0 TFSI engines. |
Price on Request |
||||||||||||||||||||
| VW207C |
Piston
Pin Pilot Drift. Old Type 4 station wagon. Also install
pilot bearing on crankshaft flywheel side on come cars.
|
Price
on
Request |
||||||||||||||||||||
| . |
|
.
|
||||||||||||||||||||
| . | See the selection of type 798 hose clamp pliers on our HAZET page. |
.
|
||||||||||||||||||||
| 12942-XL | Esgen Hose Clamp Pliers. Remote
Control. Especially sutiable in tight spaces where
direct application of a pair of pliers is not
possible.With locking mechanism. Body 250mm (10")
long. Flexible Cable 550mm (22") long. Please wear safety goggles!
The number VAS5024A was replaced by the VAS6340 tool.
This plier is equivalent to the VAS6340 tool. 
 |
See Esgen Page |
||||||||||||||||||||
| VW 161a | Snap ring pliers, Made in Germany. Special order. | |||||||||||||||||||||
| Hazet 798-10 |
HAZET Pliers, Special Spring Clamp
Pliers, with locking device, for VW-AUDI
 |
|||||||||||||||||||||
| HAZET 798-010/4 | Spare tip set for the 798-10 pliers. Jaws for
Special Hose Clamp Pliers. |
|||||||||||||||||||||
|
|
Hose Clamp Pliers. 230mm long. Swivel jaws. Locking lever. Made in USA. Jaws are similar to HAZET 798-10, but these are for small size clamps. | |||||||||||||||||||||
|
|
||||||||||||||||||||||
| 3316 | Radio Removal Tools, set of 2 tools. Used since July 1994. About 9mm wide. Part number: 1H0 051 530. For factory radios with 2 vertical slots. | |||||||||||||||||||||
| 3344A | Radio Removal Tool Audi from 1995-Replaced by T10057 |
.
|
||||||||||||||||||||
| T10057 | Radio Removal
Tools, Audi from 1995, New VW Beetle, and other
models. (Set of 4 tools). Such as Monsoon radio.
Please inspect your radio before buying this set.
These are about .8mm thin and about 9mm wide. LIMITED QTY
|
|||||||||||||||||||||
| VW160 | Radio Removal Clips 1983 and up. Special round tips. No Longer Available. | |||||||||||||||||||||
|
|
New! Mercedes-Benz Audio Test CD (can be used
with any audio system). Used by Mercedes as part of
the Pre-Delivery Inspection procedure. This CD also
has a selection of tracks used to locate distortion in
a particular frequency range. And it includes a
selection of test tracks in different genres of music
like Latin, Drum Solo, Jazz, Female Vocal, Male Vocal,
Rock, Electronic, Mood Music, Hip Hop, and Logic
7 Demo.
 |
Price on
Request |
||||||||||||||||||||
|
|
.
|
|||||||||||||||||||||
|
221-208 |
Old type spark plug socket. With ball and
T-handle. 20.8mm (13/16"). No
longer available. |
|||||||||||||||||||||
| HAZET 764 |
Samstag Sales
is happy to offer this vintage Used HAZET 764 spark plug
socket in good condition. This tool has been out of
produdtion for years and it is no longer available
from HAZET. This is the original tool that would have
been included in the old VW Beetle round tool box. It
is 13/16" inch with fold away handle. In good
condition with some chrome flaking at the socket end.
Hard to find in this good condition. This one is
marked D.B.G.M. -- for Deutsche Bundesgebrauchsmuster,
post-war German for ‘registered design’ |
$47.50 |
||||||||||||||||||||
|
2505-2 |
HAZET 3/8" dr Expanding Spark Plug Socket,
13/16" (20.8mm) . With a rubber insert to hold the
plug. It is made with Chrome-Vanadium steel and
mat chrome plated. Push the release pin and this
socket will adjust from 137.5mm to 157.5mm to
197.5mm. HAZET suggests you use a model 8816GK
flex head ratchet with this socket to get the most
benefit. Same as Volkswagen VAS
5301/1 |
|||||||||||||||||||||
|
3122B |
Volkswagen 3122B Spark plug socket, 3/8"
drive, 16mm (5/8"), 6 point, flex end with
rubber insert. 270mm (10-1/2") long. For VR6 engines.
|
|||||||||||||||||||||
|
|
Spark Plug Socket Puller, made to pull off
the spark plug socket on 2.8-2.9 L VR6 engines of
VW-Golf, Passat, Vento, and Corrado. Also Audi 80,
100, A4, A6 with 2.6 and 2.8 L V6 engines. And some 4
cyl engines. Volkswagen
factory tool. Metal shaft with locking tabs.
Made by HAZET. Same as 1849-6
, but with blue handle. Length 250mm (10" inches).
This tool is the current replacement for old tool 3277.  |
|||||||||||||||||||||
|
|
Spark Plug Socket Remover for New beetle
and cars with 2.0 engine AZJ. Locking tabs. |
|||||||||||||||||||||
|
1849-2 |
HAZET Spark Plug Boot Plier. Good for Audi V6 and V8 engines. Around 290mm long, and made to pull off the spark plug socket even with the engine hot. Great for deeply located spark plug sockets. Made with special steel and chrome plated. | |||||||||||||||||||||
| . |
|
. | ||||||||||||||||||||
|
|
Camber adjustment tool. Used to adjust front
wheel camber. CORRADO (VR6) PASSAT (VR6) GOLF/ JETTA
3. Price is for 1 tool.
|
|||||||||||||||||||||
|
|
Steering Wheel Sleeve Puller. Used to remove
splined sleeve. VW Golf II, Jetta, Golf III, Vento,
Polo, Passat 1988 and up. Special
order. |
|||||||||||||||||||||
|
|
Brass Drift for knocking in steering column
sleeves. Allows the sleeves on the steering-column to
be installed without risk of damage. Special order. |
|||||||||||||||||||||
| MATADOR
0153 00 02 |
Back up wrench
for servo pump pulley. 42mm between mounting bolts,
36mm diameter of the center opening. For pumps ZF 7691
955 235 J/S/A/P-2092 05. |
$57.74 (Picture) |
||||||||||||||||||||
|
3279 |
Steering Centering Tool. No Longer Available. |
|||||||||||||||||||||
|
T10021 |
Tensioning tube for installing retaining clip
on steering column tube. |
|||||||||||||||||||||
|
T10179 |
Special 18mm offset wrench, rear axle camber
adjust. 110mm long, 1/2" drive.
|
|||||||||||||||||||||
| Volkswagen T10188 |
Elbow Torque Wrench
Insert 21mm. For Wheel Alignment. Special Order.
 |
Price on Request (Picture) |
||||||||||||||||||||
| Volkswagen T10304 |
Special Splined Socket used
to turn the steering box during repairs. |
$179.99 (Picture) |
||||||||||||||||||||
| Volkswagen T40021 |
Adjusting Tool Chamber |
Price on Request |
||||||||||||||||||||
|
T40022 |
Bar for adjusting camber and track Quattro rear axle. Includes part T40022/1 Special Order Only! | Price
on Request |
||||||||||||||||||||
|
|
Paschke Profitec "X" shape square drive bit
for power steering servo pump lock nut. The width of
"X" is 19mm. Overall length is 52mm with a 22mm hex
drive. ****NO
LONGER AVAILABLE. |
|||||||||||||||||||||
| 4M-143 VAG1941 |
Front Wheel Camber Adjustment
Tool. For
Audi A3, A4, B5 and New Passat. High quality. Made by (MMMM) Brand From Europe. Similar to factory tool VAG1941
|
Price on Request (Picture) |
||||||||||||||||||||
|
|
Steering centering bolt for 4WD vehicles.
With cone shape tip. This plastic bolt prevents damage
to the steering box. The price listed is for 1 bolt.
|
|||||||||||||||||||||
| VW179 |
Offset Flare
Wrench. This special 36mm, 12 point wrench is used
for old VW Bug Camber Adjustment.
No longer available from VW, we can supply
the P246 aftermarket tool, Same as old VW
factory tool VW179. |
See
Porsche Page |
||||||||||||||||||||
| VW278B | Double Hex Key with hole.
24mm x 30mm with 18mm hole, 35mm long. For adjusting
steering gear worm shaft. Also install locking plate
on freewheel. |
Price on Request (Picture) |
||||||||||||||||||||
|
|
.
|
|||||||||||||||||||||
|
42952 |
Regular 6mm hex key used to remove front
strut (some cars) German Made! |
|||||||||||||||||||||
|
43596 |
Regular 7mm hex key used to remove front
strut (some cars) German Made! |
|||||||||||||||||||||
|
990-14 |
Hazet 12 point triple square socket
with 1/2" drive. Used to separate wheel bearing
housing. |
|||||||||||||||||||||
|
40-201B |
Tube Socket 28mm with 1/2" drive, for Shock adsorber cartridge Audi 80 since '92, Audi 90 since '87 (similar to VW tool 2069 that is no longer available). The 40-201B is also No longer available from VW. see Klann tool KL-0050-1 click here. | |||||||||||||||||||||
| Volkswagen 50-200 |
Drive Nut, remove shock absorber on rear
strut, 10.5mm hole, 3.5mm slot. Golf I Cabriolet,
Scirocco, Cady. Discontinued.  |
(Picture) |
||||||||||||||||||||
|
|
Open End Spanner Insert for fitting and removing the Audi A8 track rod. (special 38mm 1/2" dr crowfoot) | |||||||||||||||||||||
|
2069A |
Tube Socket 33mm, for Shock Absorber Cartridge, Audi V8 up to '94, VW-Polo since '82, Passat since 88, Audi Coupe, 200 since '84, Audi A6. No Longer Available from VW, See KLANN KL-0050-2 | |||||||||||||||||||||
|
2593-1 |
HAZET, Special 7mm hex key with handle, for
installing and removing of the front spring struts on
VW-Polo, Derby, Jetta, Scirocco, Passat, Audi 80, 100,
200 and Coupe. Sold
Out-No Longer Available. |
|||||||||||||||||||||
| HAZET 2593LG-17 |
Special 17mm Socket with holding
insert. For rear struts, VW Passat, Santana,
Audi 100, 200, with 1/2" drive. Same as factory
tool number 3017A. No Longer
Available. See the
Klann tools KL-0056-17/72 |
|||||||||||||||||||||
|
2593-2 |
Drive Nut, remove shock absorber on rear strut, 10.5mm hole, 3.5mm slot. Golf I Cabriolet, Scirocco, Cady No Longer Available! See Volkswagen 50-200 click here. | |||||||||||||||||||||
|
2593-4 |
Drive Nut, remove shock absorber on front
strut, 15.5mm hole, 5.0mm slot. Front axle Golf II,
III, Jetta, Vento, Passat since 1988, Audi 80 since
1987, similar to VW524
|
|||||||||||||||||||||
| Sauer 621 02 300 |
Strut Socket, 19.5mm
outside diameter, 14mm inside diameter, 5mm wide tabs.
Overall 60mm long. Passat since 1997.  |
$49.99 (Picture) |
||||||||||||||||||||
|
2593-22 |
Socket 22mm, like 3078, used to remove front spring struts. For VW Golf up to model 1988, Jetta up to model 1987, Scirocco, caddy, Passat, Santana, Audi 80, Golf III, and Vento since model 1993, Passat since Model 1988, Corrado, Audi 100 and 200, Audi Coupe, Audi Quattro. "No longer available from HAZET Germany. See factory tool click here. | |||||||||||||||||||||
|
2593-50 |
HAZET special thin 50mm wrench, for mounting
rear shock absorbers VW transporter T4, 1991 and Golf
3 since 1993. (Similar to VW
tool 3254) **No
longer available.
 |
|||||||||||||||||||||
|
2594 |
HAZET Shock rod holding wrench with 5mm and
6mm swivel ends. (Similiar to Volkswagen 3079). No
Longer Available.
See factory tool 3079, click here. |
$65.45
|
||||||||||||||||||||
| KLANN KL-0005 |
Universal Coil Spring Compressor. For use
with all MacPherson Struts in which the Spring
Pressure does not exceed 8000N. The spindles are
equipped with contra-rotating threads which stop the
tool from slipping around the spring. Compression
Length 65-320mm. PIC2,
PIC3
(Not for use on Mercedes) |
$300.48 Your Price $194.71 (Picture) |
||||||||||||||||||||
| KLANN KL-0050-1 |
Extra Long Tube
Socket. With 1/2" drive and 29mm outside hex for shock
absorber. For Audi 80/90 Similar to old tool 2069 and 40-201B and HAZET 2593-28.
Discontinued by
Klann, we have 1 left! |
$139.99 |
||||||||||||||||||||
| Klann KL-0050-2 |
Extra Long Tube
Socket. With 1/2" drive and 33mm outside hex for shock
absorber on Audi 100, Audi 200, and Audi A6.
Overall length 290mm. Similar to Factory tool 2069A. Discontinued.  
|
(Picture) |
||||||||||||||||||||
| Klann KL-0056-17/72 |
Klann
Strut Rod Socket Set with 2 tools. KL-0056-17 socket
17mm hex with 19mm outside hex drive. And
KL-0056-72 Double Flat
6mm socket insert with 10mm outside hex drive. For
the same job as factory tool 3017A. |
Price on Request (Picture) |
||||||||||||||||||||
| KL-0250-40 |
Klann Special Dual Ball Joint Extractor for
upper wishbone. Audi A4 and Passat. For cars with
steel wheel bearing housing. Special Order Only! Same
as VAS 6085 Note: For cars with Aluminum
wheel bearing housing, see KLANN tool KL-0250-43 KA below. To see the Klann Video click here. The T-handle shown is not included in this kit. |
$555.28 |
||||||||||||||||||||
| KL-0250-402 | Klann Accessory
Kit for very corroded joints. Special
Order Only! |
$168.24 Your Price: $109.02 |
||||||||||||||||||||
| KL-0250-403 | Klann KL-0250-403 T-Handle
Puller used to extract the punches from the KL-0250-40
tool. Special Order Only!  |
Your Price: $45.19 |
||||||||||||||||||||
| ★ | ||||||||||||||||||||||
| KL-0250-43 KA | Klann Drill-Out Tool
Kit for Strut Bolts. Applicable to VW Passat (3B);
Phaeton (3D); Audi A4 (8E, 8H, 8K); A5 (8T,8F); A6 (4B,
4G, 4F); Q5 (8R), A7 (4GA, 4GF), A8 (4D) and Seat Exeo
(3R2, 3R5) with aluminium
steering knuckle.
|
$1,071.20 (Picture) |
||||||||||||||||||||
| Volkswagen T40343 |
Volkswagen T40343 Audi R8 bonded rubber
bushing press. Using to press on the busing at the
housing for the main shaft. Type OD4 front final
drive. Audi R8 2016 and up.
 |
$339.00 |
||||||||||||||||||||
| Volkswagen 3078 |
Socket 22mm. Used to remove front
spring struts. For VW Golf up to model 1988, Jetta
up to model 1987, Scirocco, caddy, Passat, Santana,
Audi 80, Golf III, and Vento since model 1993,
Passat since Model 1988, Corrado, Audi 100 and 200,
Audi Coupe, Audi Quattro. |
$74.50 (Picture) |
||||||||||||||||||||
| Volkswagen 3079 |
Special shock rod holding wrench. 5mm and
6mm ends.
Similar to the Klann KL-0250-1 tool, similar to old
HAZET 2594.
|
|||||||||||||||||||||
|
Klann
KL-0250-1 |
Special shock rod holding
wrench. with 5mm and 6mm ends. Similar to Factory Tool
3079 Quality Made in Germany. 
|
$87.50 |
||||||||||||||||||||
| Volkswagen 3186 |
Special 21mm Socket with
1/2" drive and cut-out, used to remove front spring
struts. For VW Golf II, and Jetta since model
1987, Golf III and Vento since Model 1993, Passat
since model 1988. And Some Porsche. Similar to old
HAZET tool 2593-21. |
$99.99 (Picture) |
||||||||||||||||||||
| FourM 4M-067 (3250) |
Wishbone Support using during Eurovan
repair. Set of 2 tools. We will supply an
aftermarket tool from (MMMM)
Brand from Europe. It is a heavy duty high
quality tool.
|
|||||||||||||||||||||
| Volkswagen 3257 |
Special socket for adjusting Torsen Bars VW Transporter T4. Size 27mm, length 140mm, 1/2" drive. Also used with special tool VW391 on Passat with VR6 Automatic Transmission for removing drive flange. Same as HAZET 2583 | |||||||||||||||||||||
| Volkswagen 3287a |
Close pin style ball joint tool. special
30mm width. |
|||||||||||||||||||||
| Volkswagen 3301 |
Volkswagen 3301 Subframe
bushing tool. For front and rear subframe bushings.
Large cup 60mm diameter. Small cup 55mm diameter. With
10mm bolt with 1.5mm threads.  |
Price on Request (Picture) |
||||||||||||||||||||
| Volkswagen 3346 |
Control Arm Bushing
Installation Tool. |
Price
on Request (Picture) |
||||||||||||||||||||
| Volkswagen 3353 |
Special socket, 18mm, for loosening the
collar nut on the plunger rod of front shock absorber.
 |
|||||||||||||||||||||
| Volkswagen 3379 |
Volkswagen
special socket wrench, used for R&R locking
nut on front suspension strut. 16mm size with
1/2"drive.
|
$114.00 (Picture) |
||||||||||||||||||||
| Volkswagen 3393 |
Subframe Lock used to lock subframe in
master hole. Audi A4 , Passat B5. Set of two pins.
These are 110mm long and 19.5mm diameter. |
Price on Request
(Picture) |
||||||||||||||||||||
| Volkswagen 3412 | Volkswagen 3412 Pressure
Plate for fitting swivel joint in upper wishbone.  |
$97.50 |
||||||||||||||||||||
| Volkswagen 3416 |
Bushing Extractor Tool. |
Price
on Request (Picture) |
||||||||||||||||||||
| Matador 4078/2 (3424) |
Spreader. Used to separate suspension strut
from wheel bearing housing. 1/2" drive 5mm thick. Same
as Volkswagen 3424.
Matador order code 4078 00 31 |
|||||||||||||||||||||
| Volkswagen T10157 |
Special Adapter
for Air Spring Strut. Used to add an initial
charge before installation. Short End Threads = 1.0 x 8mm; Long End Threads = 0.8 x 8mm. |
Price on Request |
||||||||||||||||||||
| Volkswagen T10157/1 |
Special Adapter
for Air Spring Strut. VW Touraeg and Audi Q7. Used to
add an initial charge before installation. Short End Threads = 1.0 x 10mm;
Long End Threads = 0.8 x 8mm.
|
$34.79 (Picture) |
||||||||||||||||||||
| Volkswagen T10158 |
Special Socket. For
pressure retention valve on Phaeton pneumatic
suspension strut. It has a 1/4" drive, an outside
diameter of 18mm, and a length of 27mm. |
$75.00 (Picture) |
||||||||||||||||||||
| Volkswagen T10158/1 |
Special Socket. For
pressure valve on air spring damper found on Touareg
2003 and up, Audi Q7 from 2006 and up. It has a 1/4"
drive, outside diameter of 22mm, and a length of 34mm. |
$75.00 (Picture) |
||||||||||||||||||||
| Volkswagen T10452 |
Special Tool, subframe
locking pin (2 pc.), used on Jetta 2011 and up. |
$145.00 (Picture) |
||||||||||||||||||||
| Volkswagen T40010A |
Special tool used to remove aluminium track
and guide links from wheel bearing housing. |
|||||||||||||||||||||
| Volkswagen V/176 |
Ball Joint Extractor. 25mm jaw deep throat.
Volkswagen Passat 1995, 1996, 1997 etc. No Longer Available
from Germany. See Tool 3287A.
|
|||||||||||||||||||||
| Volkswagen VW267A |
Ball
Joint
Removal
Tool. For Ball Joint of Steering Knuckle. Good for old
Type 1 and Type 2 VW. Also used for installing steering
lock on newer cars. No Longer Available.
 |
(Picture) |
||||||||||||||||||||
| Volkswagen VW459 |
Ball Joint,
Bushing, Bearing Race, Install. |
Price on Request (Picture) |
||||||||||||||||||||
| NOS
Matra VW471 |
New
Old Stock (NOS) Matra VW471 Peening tool for
ball joints in the torsion arms on Type 2 Volkswagen
Buses. This is the original factory tool in NOS
condition with minor shelf wear. Made in Germany by
Matra. Note: This tool is
no longer available from the factory, Samstag Sales is
searching for another to offer as our last one has sold.  |
|||||||||||||||||||||
| PP 32 282 201 |
Paschke Profitec Special
Dual Ball Joint Extractor for upper wishbone. For cars with Aluminum Axle. No Longer Available
from Samstag Sales!
|
Not Available at this Time |
||||||||||||||||||||
| PP 33-250-300 | Paschke Profitec Press set for 71mm silent
bearing change. Audi A4 and Passat. With ball bearing
thrust piece. |
| .n |
|
*
|
|||||||||
| Volkswagen 10-222A/7 |
Volkswagen 10-222 A 7
Automatic transmission hook used for removal and
installation of automatic transmission 01P. Used in
conjunction with 10-222A engine support bridge 10-2226A
and 3407 bracket. New Old Stock - tool has been on the shelf for awhile and has some corrosion on the metal. Limited Quantity 
 |
$103.29 |
|||||||||
| 30-11 |
Thrust Pad. For many press
operations. Step 25mm and 33mm
|
Price on Request (Picture) |
|||||||||
| A1333 |
A1333 Shift Shaft Bushing Installer
Pliers. Aftermarket brand. 250mm (10") long. These
will install the nylon bushing on automatic
transmissions found in some BMW, VW, Audi and Mercedes
using ZF Transmissions.  |
See Mercedes Page |
|||||||||
| KUKKO 70-2 & 70-722 Set |
Kukko 70-2 Extractor with Kukko 70-722 Set of
4 arms, 180mm in length each, 4 spacer rings good for
bearing sizes: 6011, 6012, 6206, 6207, 6304, 6306.
This is also a VW specialist tool used for Volkswagen
rear wheel bearing on Old VW Type 1, 2, 3, Porsche 356
and some VW Dune Buggy.
|
|
|||||||||
|
Kukko 20-10-V |
Special thin profile pulling hooks with
tensioner used to keep the arms from spreading apart.
With 100mm reach. Made by KUKKO. We have the kit
Kukko # 20-10-V which includes a Kukko
20-10 puller crossbar and bolt, with the special V/170
arms with tensioner. For removing the 5th gear pinions
in the 02A transmission. Fingers 20mm wide with 4 mm
lip as measured inside.
Note: No longer available from VW, we have
the original KUKKO tool. Special
Order. |
||||||||||
|
2062 |
Drive shaft oil seal tool. Tip size 30mm,
Ring 1 size 45mm, Ring 2 size 59mm, Outside Ring 73mm.
 |
||||||||||
| VW681 |
Seal Extractor Lever. About
260mm long. Good for 5 speed 013 and automatic 087
transmission. |
Price on Request (Picture) |
|||||||||
|
|
Includes weight, rod, and crank. Rod is
23" (590mm) long.
 |
Price on request.
|
|||||||||
|
771-1-1 |
Weight for slide hammer 771. | ||||||||||
|
771-1-2 |
Threaded rod for slide hammer 771. | ||||||||||
|
771-1-3 |
Crank for slide hammer 771. | ||||||||||
|
771/37 |
Hook for impact hammer 771. | ||||||||||
|
771/38 |
Adapter bit for impact hammer 771.
 |
||||||||||
|
771/39 |
Adapter bit for impact hammer 771. | ||||||||||
|
771/40 |
Adapter bit for impact hammer 771. | ||||||||||
|
771/41 |
Adapter bit for impact hammer 771. | ||||||||||
|
2052 |
Pinion Assembly Tool. For drive pinion nut
on VW Bus Type 2 with the 091 transmission. Loosen the
wing nut on the big part and it is about 45mm diameter
inside the tool at the valley between the teeth. There
are 15 teeth inside the big part. See the FourM brand
4M-052
tool for another option |
||||||||||
| Volkswagen 3014 |
Adjustment of gearshift linkage. *No Longer Available | $89.50 (Picture) |
|||||||||
|
3059 |
Box wrench for removing selector sleeve from selector fork. **Special Order Only! | ||||||||||
Volkswagen 3109 |
Puller for installation and
removal of spring laoded drive shaft flange.
Length of bar is 85mm. |
Price on Reqiest (Picture) |
|||||||||
| Volkswagen 3142 |
Seal
driver for drive shaft flange seals in the transmission
and front differential. |
Price
on
Request |
|||||||||
|
3155 |
Ring nut wrench for pinion shaft. 1/2"
drive. Pin spacing 61mm on center between nearest pin.
Disk diameter 90mm.
 |
Price on
Request |
|||||||||
|
3183A |
Castellated Socket Wrench. To be
used during R&R of bearing support ring of the
wheel hub of Audi A6. |
Price on
Request |
|||||||||
|
3192 |
Shift linkage gauge to be used when adjusting the shift and selector cables on 02A transmission. About 175mm long. Also can be used when retaining the gear box shift lever 02A transmission. Includes 3192/1 pat. No Longer Available. | ||||||||||
|
3193 |
Shift linkage gauge to be used when adjusting
the shift and selector cables. 140mm long . *No longer available.  |
||||||||||
|
3275 |
Internal
Bearing Puller, 28-40mm , with short 70mm body and
37mm washer. Special size made by Kukko. *SPECIAL ORDER
ONLY.
 |
||||||||||
| Volkswagen 3300A |
Transmission (02J &
096) installation. *SPECIAL ORDER ONLY. |
Price on Request (Picture) |
|||||||||
| Volkswagen 3306A |
Pressure piece used when
installing shaft seal on the drive flange. Used on 01F
and 018 automatic transmissions with ALL WHEEL drive. |
$24.50 (Picture) |
|||||||||
|
3373 |
Tool used for removing conductor strip.
120mm Long.
|
||||||||||
| Volkswagen 3378 |
Volkswagen
3378 Fitting Sleeve used for fitting grooved ball
bearings with cone ring and spring. Also used on
automatic transmission 01N.
 |
$75.00 |
|||||||||
| Volkswagen 3381 |
Oil
Line Installer for inner oil tube on Audi A4 with
Automatic Transmission O1V. |
$45.00 (Picture) |
|||||||||
| Volkswagen 3383 |
Double Sealing Ring
Mandrel. For double sealing ring in the
transmission/differential of Audi A4 with O1V
automatic transmission front wheel drive. Also
Porsche Boxster final drive seal. About 13" (330mm)
long.  |
See Porsche Page |
|||||||||
|
3402 |
Install oil seal input shaft transmission,
Audi A4 1995 and up, 01V gearbox. |
||||||||||
| Volkswagen 3404 |
Seal Installer used for
fitting double sealing ring in intermediate flange on
auto. transmission 01V.
 |
$39.50 |
|||||||||
| Volkswagen T10096 |
Locating Pin Set. For installing 6-speed automatic O2E Transmission. | Price
on
Request (Picture) |
|||||||||
|
Special XZN Bit Set for engine to
5-speed automatic gearbox bolts. With 2 bits. XZN-14
with 14mm hex drive, 28mm long and XZN-12 with 10mm
hex drive, 24mm long.
 |
$49.99 (Picture) |
||||||||||
| Volkswagen T10173 |
Setting
Gauge for switch on 6-speed automatic gearbox 09B or
09G.  |
||||||||||
| Volkswagen T10421 |
Volkswagen T10421 Seal
Installer for crankshaft seal on the transmission end of
the engine. For Jetta Hybrid 7-Speed Dual Clutch Gearbox
0AM. |
$39.00 |
|||||||||
| Volkswagen T40025 |
Volkswagen T40025
Over-Center Spring Assembly Clamp used for removing and
installing over center spring.  |
$39.99 | |||||||||
| Volkswagen T40031 |
Volkswagen
T40031 Socket use to check and adjust the Automatic
Gearbox selector lever cable. Used on 2001 and up Audi
A4. Approximately 185mm long. |
$65.00 |
|||||||||
| Volkswagen T40123B |
Volkswagen T40123 B Puller
for ATF supply. For Automatic gearbox 09E, 4-wheel drive
on Audi A8 2003>, Audi A6 2005>. |
Price on Request |
|||||||||
| Volkswagen T40199 |
Volkswagen T40199 used
for removal and installation of oil sump on automatic
gearbox 0B6, four wheel drive. Examples: Audi A4 2008>, Audi A5 2008>, Audi Q5 2009>. Also used as guides to safely facilitate partial removal of Mechatronics unit to gain access to temperature sensor.  |
$59.99 |
|||||||||
| Volkswagen T40228 |
Volkswagen
T40228 Sensor Module Connector Release Socket. With
3/8" inch drive. For 7 Speed Dual Clutch Gearbox 0B5.
Audi A4 2008 and up, Audi A5 Cabriolet 2009 and up,
Audi Q5 2008 and up |
$97.50 (Picture) |
|||||||||
|
KL-0231-31 |
Klann KL-0231-31 transmission dipstick for
VW/Audi. Similar to Sauer
61269700. Special Order Only.
|
||||||||||
| US1018 | Depth Guage 300mm.
Stainless Steel. HOREX 2248 522. Needed to measure
drive plate distance. (Picture) |
See
Horex Page |
|||||||||
|
242+Body +A+5 |
Sir Tools 3 part bearing kit for old VW. With
Sir Tools 242-BODY
holding and securing fixture for Extractor Collets.
The outer sleeve constricts the Extractor Collets onto
the inner race of bearing securing a firm grip.
Extraction of the bearing is accomplished by rotating
the center bolt of 242-BODY until the polished steel
ball tip bottoms out on a protruding shaft or blind
hole. The 242-BODY along with the Extractor Collet and
bearing to be extracted work their way up the threaded
center bolt. It is applicable on Mercedes Benz, BMW,
VW Liquid-Cooled & Audi, Porsche, and VW
Air-Cooled. Included in this set is an 8
fingered collet type "242-A",
with a range 44.50 to 41.50mm For Brg.# 6306 -
European, Asian, Domestic: BMW = Getrag 262, '80; main
shaft/ output shaft: Getrag 265, '91-'85; drive shaft
/ input shaft: Getrag 265, '82-'80; drive shaft /
input shaft: Getrag 265, '91-'85; rear counter shaft:
Mercedes Transmission # =G 76/18, G 76/18A, G
76/18B, G 76/27, G 76/27A ,G 76/27/5: Porsche = 356
rear wheel bearing, all years: VW = Type 1, 2, 3, rear
wheel bearing, all years. Ships 6 pounds. Special Order
|
Price on Request (Picture) |
|||||||||
| VAG1582 |
Ball Bearing Puller, Basic
Tool. With short sleeve, long sleeve, connecting
nut, and pressing spindle.Special Order Only! |
Price
on Request (Picture) |
|||||||||
| VAG1582/2 |
Claw for Ball Bearing
Puller. With 8 fingers. For bearing on the input shaft of 012
manual gearbox. Special Order Only!
|
Price on Request (Picture) |
|||||||||
| VAG1582/10 | Volkswagen taper roller
bearing adapter used with VAG1582 when pulling off the
grooved ball bearing from the flanged shaft right side
on 096097 and 098 Transmissions. |
$194.25 |
|||||||||
| VAG1582-12 |
Claw for Ball Bearing Puller. With 7 fingers. Various applications on the O1X and 02X Transmission.Special Order Only! | Price on Request (Picture) |
|||||||||
| VAG1924 | Transmission filling device. This
device is required for changing the oil in automatic
gearboxes with code letters AG 4, 4HP18 and 5HP18.
Also for Porsche Boxster with Tiptronic Transmission.
Special Order Only! 
 |
||||||||||
| VAG1924-1 |
Replacement tip
for VAG1924 transmission Filling Device. |
Price
on Request (Picture) |
|||||||||
| VAS5162 | The ATF charging device is used to fill CVT
gearboxes. Transmission O1J. Please note: This item will cause your order to
ship by UPS Ground. It is special order, with
delivery normally 2 weeks. If you are outside the
48 States, extra shipping charges will apply. Please
email us before purchasing this item. |
||||||||||
| VAS6262 | Adapter
with M24x1.5 threads for filling DSG gearbox. With lid to
fit with your oil container. This tool will allow you
to add one bottle of fluid at a time. VW will NO LONGER supply these. *No Longer
Available!! See new tool VAS6262A in row below.
 |
||||||||||
| VAS6262A | Adapter for filling DSG
Gearbox. New version tool used by the VW dealers. |
Price on Request (Picture) |
|||||||||
| VAS6262-2 | Brass Adapter for filling Automatic
Gearbox. With M10x1 Threads. Needed for
gearboxes that have been modified at the factory. This
brass fitting will plug into the factory VAS6262
equipment. |
||||||||||
| VAS6262-4 | Volkswagen
VAS6262/4 Adapter for Filling DSG Transmission Audi VW
TFSI Engine |
Price on Request (Picture) |
|||||||||
| VAS251009 |
Separator
Puller 2-Arm with side clamp, 95mm wide, 170mm maximum
reach. Pressure screw size: Whitworth Pipe G1/2"
Threads. Same as Kukko 210-1. This tool is needed for
dismantling and assembly of gearbox. One side has
pulling claws, the other side has separating claws.
Adjustable reach with 4 positions. Pull force of 5
tons. |
See Kukko Page |
|||||||||
| . |
|
.
|
|||||||||
|
0254 00 01 |
Matador turbocharger wrench 12mm offset box end. 90
degree bend. 195mm long. Similar to Volkswagen tool T10026
No longer
available from Matador. |
||||||||||
| Volkswagen T10422A |
Turbocharger
Charge Pressure Actuator Socket. Special cut-out side.
10mm 1/4" drive. 56mm long. 2009 and up Golf, 4 cyl diesel 2.0 common rail engine. |
Price on Request (Picture) |
|||||||||
| Volkswagen T40346 |
Volkswagen T40346 Setting
Gauge for adjusting the charge pressure positioner-
V465 - on the turbocharger. 4-cylinder direct
injection 1.8L, 2L 4V TFSL (Generation III) |
$104.99 (Picture) |
|||||||||
| VAS6395A |
E-Position
Service Kit. Bracket,
Case, hand
held
unit, cables. Discontinued!
See new Kit VAS6395B |
Price on Request (Picture) |
|||||||||
| VAS6395/4 | E-Positioner Service - Expansion Kit | Price on Request (Picture) |
|||||||||
| . |
|
.
|
|||||||||
| HAZET 2574 |
HAZET 2574 Valve Depressor VW-Audi 4
cylinder gas and diesel up to 1982 Golf. Similar to
old VW factory tool VW546.
This tool is no longer available from HAZET or
Volkswagen. Samstag Sales is happy to be able to offer
this hard to find old tool in good used
condition. This tool is interesting in that the handle
is etched "VW
546 Z.." Zelenda supplied tools to Volkswagen
USA in the old days.   
 |
$75.00 |
|||||||||
| Matra 2078 | Here is a USED Matra
2078 Valve spring compressor. For VW Diesel 1983 and
newer cars. Factory tool. For changing valve shims.   |
||||||||||
| HAZET 2574-1 |
Here is a USED HAZET
Valve spring compressor. For VW Diesel 1983
and newer cars. For changing valve shims. Similar to VW 2078 , For Groove 4.5mm.
This is no longer available from HAZET. Samstag Sales
is happy to be able to offer this hard to find old
tool in good used condition. This tool has owner
markings. |
$79.00 |
|||||||||
| Esgen 13151 |
Esgen Mark-Line
of Germany valve shim pliers. Chrome-plated. Similar to old Volkswagen
number 10-208
and old VW number
US4476. No Longer Available.
 |
||||||||||
|
|
Valve lever that is used to push valve
springs in cylinder head. This is the offical factory
tool. Used with tool 2036, not included. Includes two press pieces!
|
||||||||||
Volkswagen 2036 |
Support Bridge for removal
of valve spring and rocker arm. Please note: This item will cause your order to ship by UPS Ground. If you are outside the 48 States, extra shipping charges will apply. Please email us before purchasing this item. 
 |
Price on Request (Picture) |
|||||||||
|
2577 |
Hazet Valve Seal Press tool. No Longer Available.
|
||||||||||
|
2599 |
Hazet Valve Shim Pliers. VW-Audi 1.3L and
up. Also for releasing master cylinder push rod
from clutch pedal . Similar to
Volkswagen
10-208. No
Longer Available from HAZET See Esgen 13151. |
||||||||||
|
3047A |
Slide Hammer, used to remove 7, 8, & 9mm
valve stem seals from all water cooled engines. Over
all length is about 13". Outside diameter of the
sliding sleeve is 25mm.
|
||||||||||
| Volkswagen 3121 | Volkswagen 3121 Valve
Guide Drift 7mm used to remove and install valve guides
in cylinder head of 4 valves per cylinder engines.
Approximately 220mm long. |
$34.99 |
|||||||||
|
3129 |
Volkswagen 3129 valve stem seal tool. Used
to install valve stem seals on 4 valve per cylinder
engines. Also used to drive locking pins in the
gearbox, and pressing oil seals in gearshift selector
mechanism cover. It is made of plastic with a metal
sleeve inside. About 120mm (4-3/4" inches) long.
 |
$49.50
(Picture) |
|||||||||
|
3362 |
Valve spring compressor. Used when removing
valve springs on 4 cylinder 1.8L Turbo 5-Valve Audi A4
and Passat B5. |
||||||||||
|
3364 |
Valve Stem Seal Remover Slide Hammer. Small
size. With sliding sleeve to lock the end. Overall
length about 13-1/2" inches. Outside Diameter of
sliding sleeve is 21mm. AUDI A4 with
4-Cylinder 1.8 TURBO and PASSAT B5 with
4-Cylinder 1.8L TURBO. |
||||||||||
|
3365 |
Valve Stem Seal Install |
||||||||||
|
10-204 |
Pressing on valve stem seals with cylinder
head in situation. |
||||||||||
| Volkswagen
VW387 |
Universal dial gauge holder bracket, for
valve guides, differential, and clutch work. It can be
adjusted into multiple positions. For dial gauges with
8mm stem size. Around 5" tall. |
||||||||||
| . |
|
.
|
|||||||||
| Matador 0153 00 01 |
MATADOR 0153 00
01 Belt pulley back-up wrench for water pumps
on VW, AUDI, SEAT, & SKODA. 240mm. Also for
old models of belt pulleys for tightened v-belts.
Similar to (VAG1590). Discontinued - Only one in stock. |
$57.74 (Picture) |
|||||||||
| VAG1590 | Water pump wrench for the 2-piece pulley on
water pumps found on 4-cylinder diesel engines in
Passat, Audi 80 and Transporter Caravelle. Out of stock.
See tool in line above. |
||||||||||
| . |
Wheel Bearing |
. |
|||||||||
242-Body+A |
Sir Tools 2 part
bearing kit for old VW. For #6306 Bearing. With Sir Tools 242-BODY holding
and securing fixture for Extractor Collets. The outer
sleeve constricts the Extractor Collets onto the inner
race of bearing securing a firm grip. Extraction of
the bearing is accomplished by rotating the center
bolt of 242-BODY until the polished steel ball tip
bottoms out on a protruding shaft or blind hole. The
242-BODY along with the Extractor Collet and bearing
to be extracted work their way up the threaded center
bolt. It is applicable on VW Liquid-Cooled &
Audi, and VW Air-Cooled. Included in this set is
an 8 fingered collet type "242-A",
with a range 44.50 to 41.50mm. Good for Porsche
356 rear wheel bearing, all years and VW =
Type 1, 2, 3 rear wheel bearing, all years. Ships 6 pounds. Out
of Stock. 
 |
Price on
Request |
|||||||||
| KUKKO |
VW specialist
Tool. See KUKKO set 70-2 and 70-722 for the 6306
bearing found on Old
VW = Type 1, 2, 3 rear wheel bearing. Porsche 356, and some VW
Dune Buggy. Buy it on our KUKKO
page. |
See KUKKO Page |
|||||||||
| PP 32-290-300 | Paschke Profitec
Press out mandrel set for wheel bearing outer race.
For taper bearings. Set of 3 with outside diameter of
40mm, 45mm, and 50mm. The force is evenly distributed.
Damage to the bearing housing is avoided. No longer Available!!! |
$172.89 (Picture) |
|||||||||
| . |
|
. | |||||||||
|
0585 00 14 |
Matador Special pair of pliers used to
remove the wheel bolt decorative caps on aluminum
rims. About 8 inches long with special grooves.
Similar to the Volkswagen 3314. |
$39.00
(Picture) |
|||||||||
|
|
Special Master Wheel Bolt kit for loosening
and tightening of K-MAX tamper-proof wheel bolts. Hard
case and 10 pieces included. With wide flutes
similar to RIBE sockets. As of
8-21-13 these sets are only sold to VW dealerships.
Call you local VW dealer!
  |
||||||||||
| T10313 | Special Master Wheel Bolt kit. For new Worm
Head Bolts. Not for impact use! Set in a
case with 20 sizes. As of
8-21-13 these sets are only sold to VW dealerships.
Call you local VW dealer!
 |
$299.99
|
|||||||||
|
|
Special Master Wheel Bolt kit for loosening
and tightening of ABC tamper-proof wheel bolts. Hard
case and 10 pieces included. With sharp edges similar
to XZN bits. As of
8-21-13 these sets are only sold to VW dealerships.
Call you local VW dealer!
 |
||||||||||
| Volkswagen T40131 |
Volkswagen T40131 Sender
Wheel 1 Driver. Used for assembly of sender wheel 1 on
multitronic gearbox, front wheel drive. Audi A4
2001>, Audi A4 Cabriolet 2003>, Audi A6 2005> |
Price on Request |
|||||||||
| . |
|
. | |||||||||
|
828LG-6
|
Hazet 828LG-6 Headlight
Adjustment Tool, hexagon screwdriver size 6, extra
long 300mm. For setting the headlights on Renault and
Audi |
$36.80 |
|||||||||
|
3358B |
Special tool for the angular adjustment of
the wiper blades-not suitable for A-Aerotwin
wipers. Same as Hazet 4851-1.
|
||||||||||
|
|
Washer Nozzle aiming tool, with set of 5
tips- part 3125/5A. No
Longer Available! See new tool T40187
below. |
||||||||||
| Volkswagen T10167 | Headlight washer spray jet adjusting tool. |
||||||||||
Volkswagen T40187 |
Washer Nozzle Jet Adjusting
Tool. Includes 2 packs of spare tips, 5 of the large
T40187/4 tips, and 5 of the smaller T40187/5 tips.
Click on pictures to view
full screen
|
$89.99 (Picture) |
|||||||||
| . |
|
.
|
|||||||||
|
|
. | . | |||||||||
|
|
.
|
||||||||||
| HOME | Quick Search | SEARCH | email Samstag | Request Quote |
|
|
.TOP | .Tool Reference | .How To Order | . |
Copyright © 1997-2024 Samstag Sales
t1`
