GEDORE German Hand Tools Catalog Page

☎ (615)-735-3388	Gedore Tools

Gedore Tools is one of the largest tool companies in Germany. Samstag Sales is an Authorized Dealer for Gedore Tools. GEDORE is a letter combination of (GEbrueder DOwidat REmscheid). Gedore was founded by 3 brothers (gebrueder) named Dowidat from Remscheid Germany. Please email for stock status. If not in stock, we can special order most Gedore hand tools.

HOME	Quick Search	SEARCH	email Samstag	How To Order	Request Quote
	FREE Shipping! Buy a small amount of in stock items using our shopping cart, and get free shipping to the lower 48 States. (Click for Shipping Rates & Info)
Last Gedore Update: September 4, 2024

Quick Search

Quick
Search

Arc Punch	Pliers - Circlip	Socket - Wrench
Authorized Dealer	Pliers - Circlip - Spare Tips	Spark Plug
Ball Bearing Extractor	Pliers - Circlip - V-Grip	Special Promotion
Bearing Assembly	Pliers - Combination	Suspension
Blacksmith	Pliers - Electrial	Tommy Bar
Boat Tools	Pliers - Needle nose Pliers	Tool Box
Brake	Pliers - Replacement Tips	Tool Case + Tool Trolley
Breaker Bar	Pliers - Sets	Torque Multiplier
Chisel	Pliers-Side Cutter	Torque Screwdrivers
Circlip	Podger	Torque Wrenches
Cooling System	Pry Bars	VDE Sets
Electrical Tools	Ratchets 1/4"
Engine	Ratchets 3/8"	Wad Punch
Gear Pullers	Ratchets 1/2" - SALE!	Wire Nippers
Gearless Ratchet	Ratchets 1"	Wrench - Adjustable
Hammers	Ratchets - Construction	Wrench - Combination
Hex Bit Sockets	Ratchet - Friction - 12 pt	Wrench - Combo Short
Hex Keys	Ratchet - Friction - Handle Only	Wrench - Combo - Extra Long
Hex Key - Ball End- SALE!	Ratchet - Friction - Square	Wrench - Combo Exl - SALE!
Hex Key - Pilot Tip	Ratchet - Special Production	Wrench - Combo SAE
Hole Punch	Ratchet -Square Insert -Reversible	Wrench - Crowfoot
Hollow Punch	Scissors & Knives	Wrench - Deep Offset
Impact Driver	Screwdrivers	Wrench - Double Box End
Inch Size Tools	Slide Hammers	Wrench - Double Open
Internal Bearing Extractor	Snap Ring Pliers	Wrench - Double Open End - 895
Metal Working	Snap Ring Plier Tips	Wrench - Hex Key
Measuring Tools	Sockets - Hex Bit - 1/2"	Wrench - Hook Spanner - Lug
Nautic Set for Yacht	Sockets - Hex Bit - 3/4"	Wrench - Hook Spanner - Pin
NON-Sparking Tools	Sockets - Hex Bit - 1"	Wrench - 2 Pin Spanner
Nut Drivers	Sockets - 1/4'' Drive	Wrench - Ratchet
Oil Service	Sockets - 3/8" Drive	Wrench - RIBE
Other Tools	Sockets - 1/2" Drive	Wrench - Single Open
Pin Punch - Parallel	Sockets - 1/2" with Tool Case	Wrench - Slogging Open End
Pin Spanners	Sockets - 3/4" Drive	Wrench - Slugging Closed End
Pipe Wrench	Sockets - 1-1/2" Drive	Wrench - Strap
Pipe Wrench - Chain	Sockets - Torx	Wrench - Swivel Head
Pliers - Adjustable - SALE!		Wrench - Torque
		Wrench - Torque- Aluminum
		Wrench - Tube
		Yacht Tools

Search Tip: an easy way to search this web page is to use the "Find in Page" feature built into your browser. A fast way to open the search box is to hold down your (CTRL) key and type the letter "F" on Windows. Or

+"F" keys on a Mac.

.
★ .

Authorized Dealer
    Samstag Sales is an Authorized Dealer of Gedore Tools. See our Dealer certificate signed by the Managing Partner Karen Dowidat! Contact us for a quote on any Gedore German Tool.

. .

Gedore
Tool Number Description
{click on the underlined price to see a picture} Price

123
BEARING ASSEMBLY 123

Gedore
1.85/1 Gedore 1.85/1 Plastic bearing installation kit. Consists of 33 impact rings, 3 impact sleeves, bodywork hammer with nylon heads and plastic storage case. $2,199.20
☎
Call for your Discount Price.

Gedore
1.92/12 Gedore 1.92/12 Patented Ball Bearing Extractor PLUS Set. This set contains both 1.92/1 and 1.92/2. Using this set you can remove any shaft-mounted ball bearings in a housing without any problems. This tool is easy to use with legs that are fixed in the slot. The self-locking arrangement means the force is 100% applied and utilized and it is secure at all times against slipping off. This is a Patented system. This set is suitable for more than 40 standard ball bearings up to the 6311. 1.92/1 set is for bearings: 6000-6010; 6200-6205; 6300-6304 and 1.92/2 set is for bearings 6011-6012; 6206-6212; 6305-6311; 6403-6407. Code number: (1553550) Shipping direct from warehouse to you. Delivery time approximately 1 week.

$2,234.40
(Picture)

.
BLACKSMITH TOOLS .

Gedore
233-300 Gedore 233-300 Wolf's Jaw blacksmith tongs, 300mm (12") long.

$92.10
(Picture)

Gedore
233-400
Gedore 233-400 Wolf's Jaw blacksmith tongs, 400mm (16") long.

$125.80

Gedore
233-500 Gedore 233-500 Wolf's Jaw blacksmith tongs, 500mm (20") long.

$146.30

.

BRAKE TOOLS .

Gedore
234001 Gedore 1101-234001 Metric Tubing Double Flaring Tool Set. Included in this set are:
1 Basic Frame
1 Metric Clamping Jaw
6 Cones. 6.75-10mm
1 Cone 90° for flare types D+E
1 Miniature pipe cutter 4-16mm
1 Pipe deburring reamer 4-32mm
1 Sheet steel case.
CALL for your Discount Price.

$1,056.70
(Picture)

.
BREAKER BARS .

Gedore
1997 Gedore 1997 (6144910) 1/2" dr. breaker bar with swivel head. Around 381mm (15") in length. Black plastic grip.

$117.50
(Picture)

CHISEL

Gedore 106 Gedore 106 Chisel and Punch set 6 pieces in plastic holder. With tool numbers 97-125; 97-150; 98-125; 99 12-3; 100-10; 119-4. Order Code: 8725200

97-125 Flat Cold Chisel, Tip is 12mm wide, 10mm shaft diameter, 125mm long

97-150 Flat Cold Chisel, Tip is 16mm wide, 12mm shaft diameter, 150mm long

98-125 Cross Cut Chisel, Tip is 5mm thick, 10mm shaft diameter, 125mm long

99 12-3 Drift Punch, Tip is 3mm thick, 12mm shaft diameter, 120mm long

100-10 Center Punch, Tip is 4mm, 10mm shaft diameter, 120mm long

119-4 Pin Punch, Tip is 4mm, 10mm shaft diameter, pin length is 50mm, overall length is 150mm

$67.90

108 UNI Universal Hand Protector for Chisel. Hand Guard. For oval handle chisels 20x12, 23x13, 26x13, 26x7. Also for Octagonal handle chisels 14, 16, 18, 20. About 5" long. (8658500)



$10.30
(Picture)

.
COOLING SYSTEM .

Gedore
614 Gedore 614 Anti-Freeze tester, marked in degree C. Special floating scale and measuring device allow reading an any angle! Large easy to read scale marked in degree centigrade. Other patented special features include a inflow duct that avoids bubble formation and hydrostatic lock to prevent fluid loss. Order Code: (6523770)

$119.40
(Picture)

.
ELECTRICAL TOOLS

Gedore 4522 Gedore 4522 (6690400) Electrician's Cable Knife, 50mm blade, overall length 180. Straight strong blade made of tempered steel, tough elastic plastic handle, VDE insulated up to 1000V.

$31.90

Gedore 4615 3 Gedore 4615 3 Voltage Tester, overall 140mm long. Rated for 220-250 Volts AC. Order Code: 6699110

$12.00

.
ENGINE .

Gedore
36 Z-140 Gedore 36 Z-140 special V-Belt pulley Strap Wrench. For pulley up to 6". Code: 6320070

$175.00
(Picture)

Gedore
125 1 Gedore 125 1 Piston Ring Band Clamp. Working range 57mm-125mm, with hex key. Code: 6396800

$90.30
(Picture)

Gedore
133 D-150
Gedore 133 D-150 this tool is 260mm (10-1/4") long with a 22mm (7/8") wide tip. With a wood handle to give it the old world look. Code: 1395262
$27.40
(Picture)

.
GEAR PULLERS .

. .

Gedore
1.04
{click on picture for a larger view} Gedore 1.04 2-Arm Puller type 1.04 features a scale on the cross-beam to assist set-up and make sure you have the legs evenly spaced. The legs also have a quick release feature for fast adjustment. Available in 3 sizes.

Gedore
1.04/1A Gedore 1.04/1A 130mm spread, 100mm reach. Order code: 1307703 Special Order - from Germany
$241.10

Gedore
1.04/2A Gedore 1.04/2A 200mm spread, 150mm reach. Order code: 1307827 Special Order - from Germany
$449.90

Gedore
1.04/3A Gedore 1.04/3A 350mm spread, 200mm reach. Order code: 1307940 Special Order - from Germany
$815.20

Gedore
1.09/1
Gedore 1.09/1 Puller Twist+Pull 3-arm pattern, with rotating adjustment. 150mm spread, 130mm reach. Order Code: (1748173) Call or email for your discount price!

The precise manufactured head allows fast and exact use.

The legs open by simple rotation and close automatically around the part to be removed. Hold the small knurled cylinder stationary, and turn the large knurled ring clock-wise to open the legs.

No more time-consuming setting-up and readjusting of the legs.

High-quality steel and thermo-chemical treatment guarantee highest toughness of the spindle and the legs.

Ball or tip can be easily exchanged.

$867.40
(Picture)

Gedore
1.23/1XS Gedore 1.23/1XS Puller with extra slim legs. Order Code: 2018578 For used in hard to reach places. Max .7 Ton Force. The legs grip automatically. Dimensions (a) 80mm (b)85mm (c) 9mm (d)3.5mm (e) 2mm

$189.99

. Gedore has a complete line of gear pullers, including hydraulic and standard types. Please email us for a quote on any Gedore Puller! email now !
.

.

HAMMERS .

Gedore
600 H-300 Gedore 600 H-300 Engineers hammer, 300g. Order Code: (8583070)

$47.10

Habero
76 ST SP Habero 76 ST SP Geologists' Hammer with pointed tip. 500g head, 300mm (12" long) handle. Limited Quantity Available

$157.61
(Picture)

Habero
76 ST SCH Habero 76 ST SCH Geologists' Hammer with cutting edge. 500g head, 300mm (12" long) handle. Limited Quantity Available

$157.61
(Picture)

Gedore
224 E-60
Gedore 224 E-60 Plastic Head Hammer. Ash handles with exchangeable heads made from yellow shatter-proof cellulose acetate. The head has a 60mm diameter face, overall length 380mm.
Order code: 8821940.
$73.80

Gedore
248 H-40 Gedore 248 H-40 Dead Blow Hammer. The head is 40mm diameter and filled with granulated weight. The whole thing weights about 1 pound 9 oz. It has white nylon replaceable heads. The handle is hickory wood and with the head it is about 14" long. It has a metal base painted silver with hammer-effect coating to give it an old world look. (8868580)
( Pic 2) ( Pic 3) ( Pic 4)

$91.40
(Picture)

Habero
600 H-300 Habero 600 H-300 Engineers' hammer. Rotband-Plus. Absolute safe join between the handle and the hammer head. Special high-quality steel. 425g head, 11" wooden handle.


$44.90

Gedore
600 H-500 Gedore 600 H-500 Engineers' hammer. Rotband-Plus. Absolute safe join between the handle and the hammer head. Special high-quality steel. 500g head, 11.5" Hickory Wooden Handle. (8583230).

$55.30
(Picture)

Habero
E 600 H-500 Habero E 600 H-500 Spare handle for the 600 H-500 Engineers' Hammer. 320mm long. 198g. (8596480)

$19.80

.

IMPACT DRIVER
.

Gedore
1500 ES-K 1900
Gedore 1500 ES-K1900 Impact Driver Set. 1/2" Square Drive. 5/16" Hexagonal drive. (1402242)

Set includes:
K 19 10, K 19 13, K 19 14, K 19 17, K 19 19 - - Sockets.
880 7, 880 8, 880 9, 880 12 - - Flat Blade Bits.
885 5, 885 6, 885 8, 885 1 - - XZN Bits.
890 1, 890 12, 890 13, 890 14 - - Phillips Bits.
KB 819 Adapter 1/2" square to 5/16" Hex.
K1900 - Basic Impact Driver Tool with 1/2" drive.
$314.40
(Picture)

.
INTERNAL BEARING EXTRACTORS .

. Internal Extractor. Titanium nitride surface means its harder, more wear-resistant, has better surface protection, more heat-resistant, has a fine design, with fast compensation of temperature differences. .

Gedore 1.34/1 Gedore 1.34/1 Internal Extractor 5 - 8.5 mm, code #1638556 Special Order
$186.20

Gedore 1.34/2 Gedore 1.34/2 Internal Extractor 8 - 15 mm, code #1638564 Special Order

$194.30

Gedore 1.34/3 Gedore 1.34/3 Internal Extractor 15 - 25 mm, code #1638572 Special Order
$204.40

Gedore 1.34/4 Gedore 1.34/4 Internal Extractor 25 - 36 mm, code #1638580 Special Order

$223.50

Gedore 1.34/10 Gedore 1.34/10 5-piece internal extractor set for closely-fitting ball bearings. To use with impact bearing extractor or support brace. Titanium-nitride surface, Contents in practical case: 4 internal extractors 1.34/1 (5-8.5 mm), 1.34/2 (8-15 mm), 1.34/3 (15-24 mm), 1.34/4 (25-36 mm), 1 impact bearing puller 1.35/0. M10 connecting thread. Special Order
$889.70

Gedore 1.35/1 Gedore 1.35/1 Impact bearing puller, suited for removal of small ball bearings, since there is often not enough room for support braces. For internal extractors 1.30/0-1.30/5 & 1.34/1-1.34/4. 230mm long and M10. Code: 8016070

$68.40

MEASURING TOOLS

Gedore 708 Gedore 708 Torx Gauge. This tool is used to identify TROX sizes internal E4-E16, external size T10-T60. No need to guess at what size tool you need when you have this gauge. Code: (1394428)

$16.20

.

METAL WORKING .

Gedore
350 5x120
Gedore 350 5x120 Octagonal Centre Punch, Chrome-Vanadium steel, DIN 7250. Blue enamel. No Longer Available, only 2 left in stock.

$13.65

Dako
426026 Dako 426026 Sheet Metal Nibbler. Cuts metal up to 1.2mm and plastic up to 2mm thick. No Longer Available, 1 left in stock.

$119.27
(Picture)

.
Nautic Set for Yacht - (Historical Reference-No Longer Available)
.

Gedore 504 M
Gedore 504 M Nautic Set Yacht. Metric 65 pieces.

The buoyancy of the case including the tools is about 100 N. The case is 380x250x120 mm. The set includes the following:

NC 7 6 7 8 9 10 12 13 14 15 16 17 18 19

NC H 42-10 (1,3 1,5 2 2,5 3 4 5 6 8 10mm)

NC SCL 43 TX-80 (T9 T10 T15 T20 T25 T27 T30 T40)

NC52 NC53 NC 60 P 8

NC 30 8 10 12 13 14 15 16 17 18 19 20 21 22

NC 3087

NC 3090-5

NC 3093 U-10

NC 137 10

NC 2150 3 5,5 8

NC 2160 PH 1 2

406

4522

4534-3

4610

4629

NC 8132- 160J

NC 8210-180J

NC 8316-160J

247 H-30

SOLD
OUT!!

Gedore 504 A
Gedore 504 A Nautic Set Yacht. Inch Size AF 59 pieces.

The buoyancy of the case with tools is about 100 N. The tools are in inch sizes. Dimensions of the case are 380 x 250 x 120mm. The set includes the following tools:

504 A

NC 7 1/4 5/16 11/32 3/8 7/16 1/2 9/16 5/8 11/16

NC H 42-88 A (5/64 3/32 1/8 5/32 3/16 7/32 1/4 5/16 AF)

NC SCL 43 TX-80 (T9 T10 T15 T20 T25 T27 T30 T40)

NC 52 NC 53 NC60 P 8

NC 30 1/4 5/16 11/32 3/8 AF

NC D30 7/16 1/2 9/16 19/32 5/8 11/16 3/4 AF

NC D 30 7/16 1/2 9/16 19/32 5/8 11/16 3/4 AF

NC 3087

NC 3090-5

NC 3093 U-10

NC 13

NC 145 10

NC 2150 3 5,5 8

NC 2160 PH 1 2

406

4522

4534-3

4610

4629

NC 8132 AB-160 J

NC 8210-180 J

NC 8316-160 J

247 H-30

SOLD
OUT!!

Gedore 505 A
Nautic Set for Cargo Ship
(More Info)

NON-Sparking Tools

Gedore now makes a complete line of Non-Sparking Tools. Call or email for more information.


Price on
Request

NON-Sparking
Tools

{Click on the picture to see a large view}
CALL
or
Email

.
Nut Drivers
.

Gedore
2133T

Price on
Request

.
Oil Service .

Gedore 1.75/1 Gedore 1.75/1 Oil filter claw, 1/2" drive, with 17mm outside. 60-120mm working range. Remove the adapter to access the 3/8" drive hole. Baldur. Made in Germany

$84.00
(Picture)

Gedore
37 Gedore 37 Universal Filter Wrench. For all standard oil filters and round screwed unions. 80-110mm wide, 285mm long. (6327670)

$107.50
(Picture)

Gedore
298-04

Gedore Germany 298-04 Oil Can, 300ml. Strong cast zinc container (Z 410, DIN 1743), with brass pump and aluminum spout. (Code No. 6390520).

Angled Spout (ALU 00 220) - 165mm long.

Single-acting brass pump with 2 ball valves.

Ball bearing mounted and gravity controlled suction tub, enables container to be near completely emptied.

Pump enables drip feed.

Impact-proof, ergonomic design, high surface quality, sealing mechanism with drip collector pan.

Dimensions LxWxH (mm): 335 x 230 x 120.

$112.20

. Other Tools .

Gedore 404 Gedore 404 Hacksaw, with PUK® 150mm blade, 11" long overall. Order Code: 6500480

$26.50
(Picture)

PIN Punch - Parallel

Gedore
115 GEDORE Metric pin punch set. Perfect for the Gunsmith. This is the part number 115 set code (8756780). This set has 8 parallel pin punches in sizes .9mm, 1.4mm, 1.8mm, 2.4mm 2.8mm, 3.4mm 3.9mm, 5.9mm. These have a knurled shank, with the punches finely ground and polished. The points are made with 115CrV3 steel and hardened to 55-59HRC. The guide sleeve is moveable on the 7 smallest sizes.



$114.60
(Picture)

.

PIPE WRENCHES .

Type 100

Gedore
100-1
Gedore 100 1 Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form C. 48mm jaw opening. 320mm long. (4500140) Special Order Only!

$181.40

Gedore
100-1.1/2
Gedore 100 1.1/2 Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form C. 60mm jaw opening. 420mm long. (4500220) Special Order Only!

$227.20

Gedore
100-2
Gedore 100 2 Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form C. 80mm jaw opening. 550mm long. (4500300) Special Order Only! $316.30

Gedore
100-3 Gedore 100 3 Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form C. 110mm jaw opening. 630mm long. (4500490) Special Order Only! $487.60

Type 175

Gedore
175-1 Gedore 175 1 Swedish Pattern Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form A. 44mm or 1" jaw opening. 320mm long. (6437340) Special Order Only!

$136.60
(Picture)

Gedore
175-1.1/2 Gedore 175 1.1/2 Swedish Pattern Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form A. 62mm or 1.1/2" jaw opening. 430mm long. (6437420) Special Order Only!

$205.90

Gedore
175-2 Gedore 175 2 Swedish Pattern Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form A. 76mm or 2" jaw opening. 580mm long. (6437500) Special Order Only!
$314.30

Gedore
175-3 Gedore 175 3 Swedish Pattern Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form A. 105mm or 3" jaw opening. 670mm long. (6437690) Special Order Only!
$403.50

Gedore
175-4 Gedore 175 4 Swedish Pattern Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form A. 130mm or 4" jaw opening. 760mm long. (6437770) Special Order Only!
$615.50

Type 176

Gedore
176-1
Gedore 176 1 Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form B. 44mm jaw opening. 320mm long. (6438150) Special Order Only!

$113.40

Gedore
176-1.1/2
Gedore 176 1.1/2 Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form B. 62mm jaw opening. 430mm long. (6438230) Special Order Only!

$161.20

Gedore
176-2
Gedore 176 2 Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form B. 76mm jaw opening. 580mm long. (6438310) Special Order Only! $236.90

.	PIPE WRENCHES - Chain Type	.
	Type 122
Gedore Type 122	Gedore Type 122. Special Order Only!	Price on Request

.

. PLIERS - Adjustable

Gedore
142 10 TL
Gedore 142 10 TL Universal Adjustable Pliers with red handles, 255mm long (10" inch), 15 settings. Made in Austria. Order Code: 3076105

$54.54
(Pic 2)

Gedore
146 10 C

Gedore 146 10 C Universal Adjustable Pliers, 10 inches long, all chrome, box joint. Made in Austria.(6413240)

$94.70
(Picture)

183 10 JC
Gedore 183 10 JC Adjustable Plier Wrench. Can replace two complete open-ended spanner sets, metric and inch, gripping size 0-52mm/0-2", 250mm long. DIN ISO 5743. Made in Austria. (3066061)



SALE!
$115.20
~~$128.00~~

.

PLIERS - Circlip - Snap Ring
.

Gedore
8000 A 1 Gedore 8000 A 1 Circlip Pliers. For external retaining rings 10-25mm (3/8-1"), straight pattern. Clamping protection. 141mm long. (6701460)

$39.30

Gedore
8000 A 2 Gedore 8000 A 2 Circlip Pliers. For external retaining rings 19-60mm (3/4-2.3/8"), straight pattern. Clamping protection. 182mm long. (6701540)

$42.40

Gedore
8000 A 4 EL
Gedore 8000 A 4 EL Circlip Pliers. For external retaining rings. Straight tips 85-40mm (3.3/8-5.1/2"). Black handle with zinc-plated tips and lock lever. 550mm long. Code # 2011778 $224.70
(Picture)

Gedore
8000 A 5
Gedore 8000 A 5 Circlip Pliers. For external retaining rings. Straight tips 122-300mm (4.13/16-11.7/8"). Black handle with zinc-plated tips and lock lever. 550mm long. Code # 6701890
$217.20
(Picture)

Gedore
8000 A 6
Gedore 8000 A 6 Circlip Pliers. For external retaining rings. Straight tips 252-400mm (9.15/16-15.13/16"). Black handle with zinc-plated tips and lock lever. 550mm long. Code # 6701970
$245.40
(Picture)

Gedore
8000 A 0G
(6700140)
Gedore 8000 A 0G Circlip Pliers. For external retaining rings. 30 degree tips. With brass gap stop adjustment screw. 140mm long. For Seeger circlips 1.5 - 3.5mm and Benzing clamping circlips 1.5 - 3.5mm. $82.00
(Picture)

Gedore
8000 A 1G
(6700220)
Gedore 8000 A 1G Circlip Pliers. For external retaining rings. 30 degree tips. With brass gap stop adjustment screw. 140mm long. For Seeger circlips 4 - 9mm and Benzing clamping circlips 3 - 11mm. $82.00
(Picture)

Gedore
8000 A 2G
(6700300)
Gedore 8000 A 2G Circlip Pliers. For external retaining rings. Straight tips. With brass gap stop adjustment screw. 182mm long. For Seeger circlips 10 - 15mm and Benzing clamping circlips 12 - 16mm. $84.10
(Picture)

Gedore
8000 A 01G
(6700650)
Gedore 8000 A 01G Circlip Pliers. For external retaining rings. 90 degree tips. With brass gap stop adjustment screw. 134mm long. For Seeger circlips 1.5 - 3.5mm and Benzing clamping circlips 1.5 - 3.5mm. $82.00
(Picture)

Gedore
8000 A 11G
(6700730)
Gedore 8000 A 11G Snap ring pliers. For external retaining rings. 90 degree tips. With brass gap stop adjustment screw. 134mm long. For Seeger circlips 4-9mm and Benzing clamping circlips 3-11mm.



$82.00
(Picture)

Gedore
8000 A 21 G
(6700810)
Gedore 8000 A 21G Circlip Pliers. For external retaining clips. 90 degree tips. With bras gap stop adjustment screw. 170mm long. For Seeger circlips 10-15mm and Benzing clamping circlips 12-16mm.

$84.10

(Picture)

Gedore
8000 A 51
Gedore 8000 A 51 Circlip Pliers for external retaining rings, 90 degree bent tips, 125-300mm (4.15/16-11.7/8") rings. Overall length 560mm (22"). (6702860) $202.00

Gedore
8000 J 0
Gedore 8000 J 0 (6703240R) Circlip Pliers for the Form C internal retaining rings. This size is the 8-13mm (3/8"-9/16") with straight tips. They are GEDORE chrome-vanadium steel with red handles. Made in Austria. Measure 141mm and weigh 80g.
$29.28

Gedore
8000 J 1
Gedore 8000 J 1 (6703320R) Circlip Pliers for the Form C internal retaining rings. This size is the 12-25mm (3/8"-1") with straight tips. They are GEDORE chrome-vanadium steel with red handles. Made in Austria. Measure 141mm and weigh 81g.
$30.88

Gedore
8000 J 2 Gedore 8000 J 2 (6703400R) Circlip Pliers for the Form C internal retaining rings. This size is the 19-60mm (3/4"-2 3/8") with straight tips. They are GEDORE chrome-vanadium steel with red handles. Made in Austria. Measure 183mm and weigh 164g.
$28.76

Gedore
8000 J 3
Gedore 8000 J 3 (6703590) Circlip Pliers for the Form C internal retaining rings. This size is the 40-100mm (1.5/8"-4") with straight tips. They are GEDORE chrome-vanadium steel with blue handles. Made in Austria. Measure 230mm and weigh 281g. This tool is popular with oilfield workers for use on wireline.

$37.74

Gedore
8000 J 4 Gedore 8000 J 4 (6703670R) Circlip Pliers for the Form C internal retaining rings. This size is the 85-140mm (3.3/8"-5.1/2") with straight tips. They are GEDORE chrome-vanadium steel with red handles. Made in Austria. Measure 322mm and weighs 472g.
$59.38

Gedore
8000 J 5 Gedore 8000 J 5 Circlip Pliers for internal retaining rings, straight tip, 125-300mm (4.15/16-11.7/8") rings. Overall length 565mm (22"). (6703750)

$230.10

Gedore
8000 J 6

Gedore 8000 J 6 (6703830) Circlip Pliers for internal retaining rings. This size is the 252-400mm (9.15/16"-15.13/16") with straight tips. They are GEDORE chrome-vanadium special hardened and tempered steel. Measures 575mm and weighs 1846g.
Note: Ships USPS Large Flat Rate Box

Gedore 8000 J 6 Circlip
Pliers for Internal Retaining Rings

$227.00
(Picture)

Gedore
8000 J 31 Gedore 8000 J 31 (6704560R) Circlip pliers (Red handle) for the Form D internal retaining rings. This size is the 40-100mm (1.5/8"-4") with 90° angled tips. They are GEDORE chrome-vanadium black tempered steel with red handles. Made in Austria. Measure 214mm (8-3/8") in length and weigh 279g.

$37.90

Gedore
8000 J 51
Gedore 8000 J 51 (6704720) Circlip Pliers for internal retaining rings. This size is the 122-300mm (4.13/16"-11.7/8") with 90º angled tips. They are GEDORE chrome-vanadium special hardened and tempered steel. Measures 575mm and weighs 1953g.
$241.00

Gedore
8000 J 61
Gedore 800 J 61 (6718510) Circlip Pliers for internal retaining rings. This size is the 252-400mm (9.15/16"-15.13/16") with 90º angled tips. They are GEDORE chrome-vanadium special hardened and tempered steel. Measures 579mm and weighs 1934g. $203.90

Gedore
8005 J
Gedore 8005 J (6707230) Circlip Pliers for internal retaining rings. This size is the 305-500mm. Measure 705mm and weighs 9 lbs. *Special Order Only.

$999.90

PLIERS- Replacement Tips

Gedore
E-8000 A 5 Gedore E-8000 A 5 Set of 2 Replacement Tips for type 8000A5 snap ring pliers. 125-300mm rings. 3.5mm tips. (5701840)

$32.30

Gedore
E-8000 A 6 Gedore E-8000 A 6 Set of 2 Replacement Tips for type 8000A6 snap ring pliers. 252-400mm rings. 4.5mm tips.
Length 100mm (4")

$32.00
(Picture)

Gedore
E-8000 A 51 Gedore E-8000 A 51 Set of 2 Bent Replacement Tips for type 8000A51 snap ring pliers. 125-300mm rings. 3.5mm tips. (5702810)

$32.00

Gedore
E-8000 A 61 Gedore E-8000 A 61 Set of 2 Bent Replacement Tips for type 8000A61 snap ring pliers. 252-400mm rings. 4.5mm tips. (5701760)

$32.00
(Picture)

Gedore
E-8000 J 5 Gedore E-8000 J 5 Set of 2 Replacement Tips for type 8000J5 snap ring pliers. 122-300mm rings. 3.5mm tips.
Length 65mm (2-1/2") (5703700)

$27.40
(Picture)

Gedore
E-8000 J 6 Gedore E-8000 J 6 Set of 2 Replacement Tips for type 8000J6 snap ring pliers. 252-400mm rings. 4.5mm tips.
Length 74mm (2-15/16"). (5703890)

$27.40

Gedore
E-8000 J 51 Gedore E-8000 J 51 Set of 2 Bent Replacement Tips for type 8000J51 snap ring pliers. 122-300mm rings. 3.5mm tips. (5704780)

$27.40
(Picture)

Gedore
E 8000 J 61 Gedore E 8000 J61 Set of 2 Bent Replacement Tips for type 8000J61 snap ring pliers. 252-400mm rings. 4.5mm tips. (5702730)

$27.10

PLIERS- Circlip - V -Grip

Gedore
8007 Gedore 8007 V-Grip Circlip Pliers. 305-1000mm range, tips 5.9mm. (3084493) More Info

Price on Request

Gedore
8006 Gedore 8006 X-Grip Circlip Pliers. 252-1000mm range, tips 4.5mm. (1394401) See LANG number 87 Pliers.

No Longer Available

PLIERS- Combination German Pattern

Gedore
8210-160 JC Gedore 8210-160 JC Combination Plier German pattern, Lay-on cutter box. DIN ISO 5746. 160mm long. (6731100) Special Order Only!
$59.10

Gedore
8210-180 JC Gedore 8210-180 JC Combination Plier German pattern, Lay-on cutter box. DIN ISO 5746. 180mm long. (6731530)

$62.20

Gedore
8210-200 JC Gedore 8210-200 JC Combination Plier German pattern, Lay-on cutter box. DIN ISO 5746. 200mm long. (6732180) Special Order Only! $69.10

Gedore
8248-160 JC
Gedore 8248-160 JC Angled Combination Pliers. Angled plier head 60 degrees. For all wires including piano wire, 1.6mm. (2276585).

Price on Request

.

PLIERS - Electrical

Gedore
8097 Gedore 8097 (6702940) Automatic Stripping Pliers with v-shaped cutting knife. For stripping single-stranded conductors sizes 0.2 - 6.0 mm². Adjustable stripping length, with wire cutter up to 2mm.

$59.30

Gedore
8133-180 JC Gedore 8133-180 JC (6722110) Multiple Pliers with cutting edge, serrated, straight pattern. For stripping wire of sizes 0.5/1.5/2.5mm², crimping of conductor end-sleeves 0.5-2.5²mm, squeezing of insulated flat plugs 1.0-2.5²mm.

$74.70

PLIERS- Needle nose Pliers

Gedore
8132-140 JC Gedore 8132-140 JC Needle Nose Pliers, wire cutter, serrated straight pattern. DIN ISO 5745. 140mm long. (6718860) Special Order Only!
$53.40

Gedore
8132-160 JC Gedore 8132-160 JC Needle Nose Pliers, wire cutter, serrated straight pattern. DIN ISO 5745. 160mm long.

$56.70

Gedore
8132-200 JC Gedore 8132-200 JC Needle Nose Pliers, wire cutter, serrated straight pattern. DIN ISO 5745. 200mm long. Special Order Only!
$60.20

Gedore
8133-180 JC

Gedore 8133-180 JC Triple Pliers, wire cutter, crimper, stripper, with serrated straight pattern tips. 180mm long. (6722110)

$74.70

PLIERS- Sets

Gedore
VDE S 8003 H
Gedore VDE S 8003 H Set of three pliers. The handles are VDE insulated sleeves. Includes the VDE 8250-180 H, VDE 8132-160 H and VDE 8314-160 H. The VDE 8250-180 H is 180mm while the VDE 8132-160 H and VDE 8314-160 H are 160mm. (1550594)

$195.80
(Picture)

PLIERS- Side Cutter

Gedore
8314-125 JC Gedore 8314-125 JC Side Cutter Swedish pattern. DIN ISO 5749. 125mm long. (6742300) Special Order Only!
$54.70

Gedore
8314-140 JC Gedore 8314-140 JC Side Cutter Swedish pattern. DIN ISO 5749. 140mm long. (6742730)

$55.30

Gedore
8314-160 JC Gedore 8314-160 JC Side Cutter Swedish pattern. DIN ISO 5749. 160mm long. (6743380)

$86.80

Gedore
8316-160 JC Gedore 8316-160 JC Side Cutter American Pattern Pliers. Overall length 180mm, cutting length 22.6mm, max cutting capacity 1.4-2.0mm. (6744510)

$67.10

PRY BARS

Gedore
S 141-3
Gedore S 141-3 (1525476) Pry Bar set of 3. Hardened along the full length with plastic handle. Due to the size, this set could ship UPS Ground, depending on your location.
Set Includes:
141-300 Tip size 11mm Length 300mm
141-390 Tip size 13mm length 390mm
141-600 Tip size 20mm Length 768mm

$127.90
(Picture)

RATCHETS & ADAPTERS 1/4" .

Gedore
2090-12 Gedore 2090-12 1/4" extra-long extension with ball-locking feature. 305mm in length. Chrome plated and polished. (6173340)

$26.80

Carolus
7226
Carolus 7226 Readyflex® Flex Head Bit Ratchet. With 7 locking positions. For 1/4" drive bits. With internal spring ball lock to hold the bit in place. Popular tool used for maintenance of the Hänel Storage Systems. Order Code: (1519662) No Longer Available. The new tool will be Gedore Red Code: 3300160 below.



$87.44
(Picture)

Gedore
3300160 Swivel head bit ratchet 1/4" reversible. Two component handle (2C). With 5 locking positions, magnetic holder, lever for reversible operation. In-hex for direct mounting of bits as per DIN 3126 - D 6.3 from the Gedore Red line of tools. Gedore order code 3300160 Gedore Red part number R40170027.



$79.99

Carolus
3300.02 Carolus 3300.02 Bit 1/4" drive 2mm hex bit (1852027) *No Longer Available. We have a few left in stock!

$2.99

Carolus
3300.03 Carolus 3300.03 Bit 1/4" drive 3mm hex bit (1513435) *No Longer Available. We have a few left in stock!

$2.99

Gedore
685 4 Gedore 685 4 (6539180) screwdriver bit for in-hex screws. The type 685 bit is for use in electric and air tools and also hand operation. 1/4" drive with a diameter 4.0mm and length of 25mm. Made of special vanadium steel and a gun-metal finish.
*No Longer Available Individually, Few Left in Stock

$1.90

Gedore
685 5
Gedore 685 5 (6539260) screwdriver bit for in-hex screws. length of 25mm
*No Longer Available Individually, Few Left in Stock

$1.90

Gedore
685 6
Gedore 685 6 (6539340) screwdriver bit for in-hex screws. length of 25mm
*No Longer Available Individually, Few Left in Stock

$1.90

Gedore
685 8 Gedore 685 8 (6539420) screwdriver bit for in-hex screws. length of 33mm
*No Longer Available Individually, Few Left in Stock

$2.80

Gedore
2094
Gedore 2094 (6170830) Square Coupler 1/4" inch . For hand-operated sockets and accessories. About 19.8 mm long.

$9.50

RATCHETS AND ADAPTERS 3/8"

Gedore
3093 GU-3 Gedore 3093 GU-3 Locking Flex head 3/8" drive ratchet. Head swivels 180 degree and locks in 5 positions. About 11 inches long. Fine tooth ratchet with reversing disk. Max torque is 300Nm. Only 1 available with a black handle. (6237170)

$184.50
(Picture)

Gedore
3093 Z-94
Gedore 3093 Z-94 (6237680) Push Through Ratchet 3/8" drive. 200mm long. Push the square drive through to the other side to change direction. $76.70

Gedore
3094
Gedore 3094 (6237760) Coupler 3/8". For hand-operated sockets and accessories. About 29mm long.

$9.75

RATCHETS AND ADAPTERS 1/2"

Gedore
1990-5 Gedore 1990-5 Extension 1/2" drive, 125mm long. Order Code 6143860

$27.30

Gedore
1990-10 Gedore 1990-10 Extension 1/2" drive, 250mm long. Order Code 6143940

$37.30

Gedore
1993 GU-3 Gedore 1993 GU-3 (6144320) Reversible ratchet 1/2" drive with Flex head. 180 degree swivel. 282mm long. Fine tooth. Max torque 300 N.m

$177.10
(Picture)

Gedore
1993 U-10 T Gedore 1993 U-10 T (6142620) Ratchet 1/2" drive, quick release push button. Reverse lever with center lock. All black handle until stock runs out. New ones are blue/black.

$188.30
(Picture)

Gedore
1993 U-20 Gedore 1993 U-20 Ratchet 1/2" drive, 270mm long. Fine-toothed with lever change and push-button release. Order Code: 1436686

SALE!
$146.90
~~$163.20~~
(Picture)

Gedore
1993 Z-94 Gedore 1993 Z-94 (6144590) Ratchet, 270mm long, push-thru plug, 1/2" drive. Removable plug. Plastic handle. Ratchet angle 7.5 degree with 48 teeth.

SALE!
$84.50
~~$93.90~~
(Picture)

Gedore
1994 Gedore 1994 square coupler 1/2" drive. About 38mm (1-1/2") long. Order Code 6144670

$9.99

Gedore
1995 Gedore 1995 Universal Joint 1/2", 72mm long. Order Code 6144750

$68.80

RATCHETS AND ADAPTERS 1"

Gedore
2193U-10 K
(6196120) Gedore 2193U-10 K (6196120) Ratchet head only 1" drive 184mm.
Price on Request

Gedore
2190-8
(6180200) Gedore 2190-8 (6180200) Extension 1" drive 200mm
$152.40

Gedore
2190-16
(6180390)
Gedore 2190-16 (6180390) Extension 1" drive 400mm
$212.00

Gedore
2187 G
(6195900) Gedore 2187 G (6195900) Tommy Bar 1" drive 700mm
Price on Request

Gedore
2187 K
(6196040)
Gedore 2187 K (6196040) Driving Piece for sliding T 1" drive 800mm
Price on Request

Gedore
2194
Gedore 2194 Coupler 1" Square, for ratchets with push through plug. With locking pin on one end and push release button on the other end. Body 67.5mm long. (6180710)

$60.30

Ratchets - Construction - Podger

29 17x19
Reversible ratchet 17x19mm, bi-hexagon and "rat-tail" handle. Length:315mm. (1648934)
$112.70

29 19x22
Reversible ratchet 19x22mm, bi-hexagon and "rat-tail" handle. Length:315mm (1382853) $156.70

29 19x24
Reversible ratchet 19x24mm, bi-hexagon and "rat-tail" handle. Length:365mm (1648926) $156.70

29 24x30 Reversible ratchet 24x30mm, bi-hexagon and "rat-tail" handle. Length:402mm (6262790) $296.50

29 27x32 Reversible ratchet 27x32mm, bi-hexagon and "rat-tail" handle. Length:402mm (6262950) $307.80

29 36x41 Reversible ratchet 36x41mm, bi-hexagon and "rat-tail" handle. Length:495mm (6263170) $465.80

Friction Ratchets - 12 Points -(Gearless Ratchet)

Gedore
31 KR Gedore 31 KR Wrench, Friction type ratchet (Gearless Ratchet) with ring insert. 8 to 115mm, interchangeable 12 point inserts, Made with Gedore-Vanadium Steel 31 CrV3, Mat. No. 1.2208 with gun-metal finish. Frequently used on heat exchangers and other heavy industrial equipment.

More info

Gedore
31 KR 12-27
(6255150)
Gedore 31 KR 12-27 Wrench, Friction ratchet, 27mm 12 point, type 31K-12 handle, 305mm (12") long.
$167.60

Gedore
31 KR 12-28
(6255230)
Gedore 31 KR 12-28 Wrench, Friction ratchet, 28mm 12 point, type 32K-12 handle, 305mm (12") long.
$169.90

Gedore
31 KR 16-30
(6255580)
Gedore 31 KR 16-30 Wrench, Friction ratchet, 30mm 12 point, type 31K-16 handle, 400mm (16") long.
$226.30

Gedore
31 KR 16-32
(6255740)
Gedore 31 KR 16-32 Wrench, Friction ratchet, 32mm 12 point, type 31K-16 handle, 400mm (16") long.
$226.30

Gedore
31 KR 20-36
(6256120)
Gedore 31 KR 20-36 Wrench, Friction ratchet, 36mm 12 point, type 31K-20 handle, 500mm (20") long.



$297.70

(Picture)

Gedore
31 KR 20-41
(6256470)
Gedore 31 KR 20-41 Wrench, Friction ratchet, 41mm 12 point, type 31K-20 handle, 500mm (20") long.
$297.70

Gedore
31 KR 25-46
(6256550)
Gedore 31 KR 25-46 Wrench, Friction ratchet, 46mm 12 point, type 31K-25 handle, 635mm (25") long.
$429.70

Gedore
31 KR 25-50
(6256630)
Gedore 31 KR 25-50 Wrench, Friction ratchet, 50mm 12 point, type 31K-25 handle, 635mm (25") long.
$429.70

Gedore
31 KR 30-55
(6256710)
Gedore 31 KR 30-55 Wrench, Friction ratchet, 55mm 12 point, type 31K-30 handle, 760mm (30") long.
$605.10

Gedore
31 KR 30-60
(6256980)
Gedore 31 KR 30-60 Wrench, Friction ratchet, 60mm 12 point, type 31K-30 handle, 760mm (30") long.
$605.10

Gedore
31 KR 35-65
(6257010)
Gedore 31 KR 35-65 Wrench, Friction ratchet, 65mm 12 point, type 31K-35 handle, 940mm (35") long.
$927.70

★

Gedore
31 KR 40-80
(6257440) Gedore 31 KR 40-80 Wrench, Friction ratchet, 80mm 12 point, type 31K-40 handle, 960mm (40") long. Frequently used size on heat exchangers.

$1,130.90
(Picture)

Gedore
31 KR 55-95
(6257790) Gedore 31 KR 55-95 Wrench, Friction ratchet, 95mm 12 point, type 31K-55 handle, 1400mm (55") long.
NOTE: Subject to prior sale. Limitied Quantity. Discontinued and on Clearance. Contact us with your shipping address to order. Shipping Weight 45 pounds.

Price on Request

Gedore
31 KR 55-100
(6257870) Gedore 31 KR 55-100 Wrench, Friction ratchet, 100mm 12 point, type 31K-55 handle, 1400mm (55") long.
NOTE: Subject to prior sale. Limitied Quantity. Discontinued and on Clearance. Contact us with your shipping address to order.

Price on Request

Gedore
31 KR 55-105
(6257950) Gedore 31 KR 55-105 Wrench, Friction ratchet, 105mm 12 point, type 31K-55 handle, 1400mm (55") long.
NOTE: Subject to prior sale. Limitied Quantity. Discontinued and on Clearance. Contact us with your shipping address to order.

Price on Request

Friction Ratchet-Handle Only

Gedore
31 K 12
(6243300)
Gedore 31 K 12 Friction ratchet handle without insert ring 12". Inside diameter approximately 39.6 mm

$126.00

Gedore
31 K 16
(6243490)
Gedore 31 K 16 Friction ratchet handle without insert ring 16". Inside diameter approximately 45.6 mm

$178.10

Gedore
31 K 20
(6243570)
Gedore 31 K 20 Friction ratchet handle without insert ring 20". Inside diameter approximately 56.6 mm. With Spring Ball on the inside.

$242.90
(Picture)

Gedore
31 K 25
(6243650)
Gedore 31 K 25 Friction ratchet handle without insert ring 25". Inside diameter approximately 70.0 mm
$330.50

Gedore
31 K 30
(6243730)
Gedore 31 K 30 Friction ratchet handle without insert ring 30". Inside diameter approximately 82.0 mm
$459.40

Gedore
31 K 35
(6243810)
Gedore 31 K 35 Friction ratchet handle without insert ring 35". Inside diameter approximately 96.0 mm

$697.50

Gedore
31 K 40
(6244030)
Gedore 31 K 40 Friction ratchet handle without insert ring 40". Inside diameter approximately 108.0 mm
$879.90

Gedore
31 K 55
(6244460) Gedore 31 K 55 Friction ratchet handle without insert ring 55". Inside diameter approximately 145 mm. NOTE: Subject to prior sale. Limitied Quantity. Discontinued and on Clearance. Contact us with your shipping address to order.
Price on
Request

Gedore
31 K 60
(6244540) Gedore 31 K 60 Friction ratchet handle without insert ring 60". Inside diameter approximately 153 mm. NOTE: Subject to prior sale. Limitied Quantity. Discontinued and on Clearance. Contact us with your shipping address to order.
Price on
Request

Friction Ratchet - Square Insert

Gedore
31 KVR 10-17 Gedore 31 KVR 10-17 Wrench, friction type ratchet. Includes square insert ring (31 VR). Gun metal finish. Ratchet 31K 10" & insert ring 31 VR 17mm. No Longer Available. One left at the warehouse, Contact us for availability.

Price on Request

Gedore
31 KVR 10-19 Gedore 31 KVR 10-19 Wrench, friction type ratchet. Includes square insert ring (31 VR). Gun metal finish. Ratchet 31K 10" & insert ring 31 VR 19mm. No Longer Available. One left at the warehouse, Contact us for availability.
Price on Request

.1234567890 Ratchet - Special Production
.123456

Z-Knarre SW 80
Z-Knarre SW 80 Special Production Ratchet 80mm, used on Alfa Laval heat exchangers. No Longer Available. See new type ratchet 31 KR 40-80

No Longer Available

Ratchet - Square Insert - Reversible

Gedore
41 V 19 Gedore 41 V 19 Reversible lever change ratchet. 19mm Length 620mm Code 6339410 *Special Order
$595.30

Gedore
41 V 22 Gedore 41 V 22 Reversible lever change ratchet. 22mm Length 620mm Code 6339680 *Special Order
$595.30

Gedore
41 V 24 Gedore 41 V 24 Reversible lever change ratchet. 24mm Length 620mm Code 6339760 *Special Order
$595.30

Gedore
41 V 27 Gedore 41 V 27 Reversible lever change ratchet. 27mm Length 620mm Code 6339840 *Special Order
$595.30

Gedore
41 BV 30 Gedore 41 BV 30 Reversible lever change ratchet. 30mm Length 910mm Code 6338600 *Special Order
$727.80

Gedore
41 BV 32 Gedore 41 BV 32 Reversible lever change ratchet. 32mm Length 910mm Code 6339330 *Special Order
$727.80

Gedore
41 BV 36 Gedore 41 BV 36 Reversible lever change ratchet. 36mm Length 910mm Code 6339920 *Special Order
$727.80

	Scissors & Knives
Gedore 52887 TE-V-320	Gedore 52887 TE-V-320 Special Scissors to cut Kevlar, aramid and glass fibre. Extra hard blades. (2082381) To be discontinued.	Price on Request

	Screwdrivers	6
Gedore 676	Gedore 676 Driving handle. Non-slip two component handle. Recessed hexagon drive 1/4". Code: 1649337. Will require a bit holder such as Gedore 699.	$15.99 (Pic 2) (Pic 3)
Gedore 2150 4	Gedore 2150 4 Scredriver for slotted head screws. Overall length is 185mm long. Order Code: 6679350	$11.60
Gedore 2150 5.5	Gedore 2150 4 Scredriver for slotted head screws. Overall length is 200mm long. Order Code: 6679430	$14.90
Gedore 2150 6.5	Gedore 2150 6.5 Scredriver for slotted head screws. Overall length is 260mm long. Order Code: 6679510	$24.80
Gedore 2160 PH 1	Gedore 2160 PH 1 Screwdriver for cross-head screws. Overall length is 180mm. Order Code: 6683380	$14.60
Gedore 2160 PH 2	Gedore 2160 PH 2 Screwdriver for cross-head screws. Overall length is 210mm. Order Code: 6683460	$18.90
Gedore VDE 2160 PH2	Gedore VDE 2160 PH2 Screwdriver electrically insulated to 1000 Volts. For cross-slotted head screws PH. It has an impact-reistant handle. The blade is of chrome-vanadium steel, with black tip. Meaures 210mm (8-1/4") long overall, and is size PH 2. BAR Code: 4010886825938 Order Code: 1612123	$21.10

	Slide Hammers
Gedore 1.81/K-1 (1936549)	Gedore 1.81/K-1 Set of threaded inserts with 200g slide hammer. Pin size M4, M5, M6, M8, M10, M12. Code # 1936549 *Special Order Only.	$277.20
Gedore 1.81/K-12 (1936557)	Gedore 1.81/K-12 Set of threaded inserts with 700g slide hammer. *Pin size M4, M5, M6, M8, M10, M12, M14, M16, M18. Code # 1936557 Special Order Only.**	$379.80

.

*************** SOCKETS - Hex Bit - 1/2" Drive
.123456

Gedore
IN 19 10
Gedore IN 19 10 Hex Bit socket 10mm. 1/2" drive, chrome plated, burnished tip, length 60mm. Order Code: (6153740)

$22.40

Gedore
IN 19 12
Gedore IN 19 12 Hex Bit socket 12mm, 1/2" drive, chrome plated, burnished tip, length 60mm. Order Code: (6153820)

$22.40

Gedore
IN 19 14 Gedore IN 19 14 Hex Bit socket 14mm. 1/2" drive, chrome plated, burnished tip, length 60mm. Order Code: (6153900)

$27.10
(Picture)

Gedore
IN 19 17 Gedore IN 19 17 Hex Bit socket 17mm. 1/2" drive, chrome plated, burnished tip, length 60mm. Order Code: (6154040)

$30.00
(Picture)

Gedore
IN 19 19 Gedore IN 19 19 Hex Bit socket 19mm. 1/2" drive, chrome plated, burnished tip, length 60mm. Order Code: (6154120)

$31.30
(Picture)

Gedore
IN 19 PM
Gedore IN 19 PM Screwdriver Bit Socket Set 1/2" drive. With 9 Metric Sizes: 17, 14, 12, 10, 9, 8, 7, 6, 5mm. Overall length of each socket is 60mm. In a sheet metal case. Order Code: (6156250)

$260.30
(Picture)

.1234567890 SOCKETS - Hex Bit - 3/4" Drive
.123456

Gedore
IN 32 14 Gedore IN 32 14 Hex Bit socket 14mm. 3/4" drive, chrome plated, burnished tip, length 80mm. Order Code: (6275850)

$46.70

Gedore
IN 32 17 Gedore IN 32 17 Hex Bit socket 17mm. 3/4" drive, chrome plated, burnished tip, length 80mm. Order Code: (6275930)

$54.80
(Picture)

Gedore
IN 32 19 Gedore IN 32 19 Hex Bit socket 19mm. 3/4" drive, chrome plated, burnished tip, length 80mm. Order Code: (6276070)

$58.20
(Picture)

Gedore
IN 32 22 Gedore IN 32 22 Hex Bit socket 22mm. 3/4" drive, chrome plated, burnished tip, length 80mm. Order Code: (6276150)

$62.90

.1234567890 SOCKETS - Hex Bit - 1" Drive
.123456

Gedore
IN 21 17 Gedore IN 21 17 Hex bit socket, 17mm hex bit, 1" drive, length 90mm. Order Code: (6181010)

$112.00

Gedore
IN 21 19 Gedore IN 21 19 Hex bit socket, 19mm hex bit, 1" drive, length 90mm. Order Code: (6181280)

$116.60

Gedore
IN 21 22 Gedore IN 21 22 Hex bit socket, 22mm hex bit, 1" drive, length 90mm. Order Code: (6181360)

$120.60
(Picture)

Gedore
IN 21 24 Gedore IN 21 24 Hex bit socket, 24mm hex bit, 1" drive, length 90mm. Order Code: (6181440)

$125.30

Gedore
IN 21 27 Gedore IN 21 27 Hex bit socket, 27mm hex bit, 1" drive, length 90mm. Order Code: (6200680)

$140.10

.

SOCKETS - Torx .

Gedore
ITX 32 T70 Gedore ITX 32 T70 Torx Socket T70, 3/4" drive, Chrome with gun-metal finish bit. 80mm long. (6272080)

$79.10
(Picture)

Gedore
ITX 32 T80 Gedore ITX 32 T80 Torx Socket T80, 3/4" drive, Chrome with gun-metal finish bit. 80mm long. (6273640)

$83.70
(Picture)

Gedore
ITX 32 T90 Gedore ITX 32 T90 Torx Socket T90, 3/4" drive, Chrome with gun-metal finish bit. 80mm long. (6276230)

$87.80

Gedore
ITX 32 T100 Gedore ITX 32 T100 Torx Socket T100, 3/4" drive, Chrome with gun-metal finish bit. 80mm long. (6276310)

$92.10
(Picture)

Gedore
TX 20 E8 Gedore TX 20 E8 1/4" dr TORX Socket (6187990)
$16.30
(Picture)

Socket - Wrench

Special Order!

25 10
6188290
Gedore 25 10 Socket Wrench. 10mm drive. Overall length 160mm about 6"
Price on
Request

25 13
6188530
Gedore 25 13 Socket Wrench. 13mm drive. Overall length 200mm about 7 1/2"
Price on
Request

25 14
6188610
Gedore 25 14 Socket Wrench. 14mm drive. Overall length 215mm about 8 1/2"
Price on
Request

25 16
6196200
Gedore 25 16 Socket Wrench. 16mm drive. Overall length 240mm about 9 1/2"
Price on
Request

25 17
6188880
Gedore 25 17 Socket Wrench. 17mm drive. Overall length 250mm about 10"
Price on
Request

25 18
6196470
Gedore 25 18 Socket Wrench. 18mm drive. Overall length 265mm about 101/2"
Price on
Request

25 19
6188960
Gedore 25 19 Socket Wrench. 19mm drive. Overall length 280mm about 11"
Price on
Request

25 21
6196550
Gedore 25 21 Socket Wrench. 21mm drive. Overall length 305mm about 12"
Price on
Request

25 22
6189180
Gedore 25 22 Socket Wrench. 22mm drive. Overall length 315mm about 12 1/2"
Price on
Request

25 23
6196630
Gedore 25 23 Socket Wrench. 23mm drive. Overall length 330mm about 13"
Price on
Request

25 24
6189260
Gedore 25 24 Socket Wrench. 24mm drive. Overall length 345mm about 13 1/2"
Price on
Request

25 27
6189340
Gedore 25 27 Socket Wrench. 25mm drive. Overall length 380mm about 15"
Price on
Request

25 30
6189420
Gedore 25 30 Socket Wrench. 30mm drive. Overall length 420mm about 16 1/2"
Price on
Request

25 PK
Gedore type 25 PK Double Ended Socket Wrench, Offset with Hole, Solid pattern with 2 hexagon heads. Deep bores above the hexagon heads to take long studs. Through-hole can be used with a tommy bar (not included). Chrome Plated. Size 6mm to 36mm. Price on Request.

More
Information

.

Sockets - 1/4" Drive
.

Gedore
20 EMU-3
Gedore 20 EMU-3 Socket Set, 1/4" dr, 6pt, chrome, plastic case, 16 piece, socket sizes: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 13, Ratchet: 2093 U-3, Sliding T bar: 2087, Extensions: 2090-4, Universal Joint: 2095, Driving Handle: 2098. To be discontinued. Call or Email to order. (6172290)

$364.10
(Picture)

Gedore
D 20 KMU-20
Gedore D 20 KMU-20 Socket set, 1/4" dr, 12pt, chrome, plastic case, 37 piece, Ratchet: 2093 U-20, D 20 socket sizes: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13. 680 socket sizes: 4, 5.5, 6.5. 685 socket sizes: 3, 4, 5, 6. 685 X socket sizes: 5, 6, 8. 687 TX socket sizes: T10, T15, T20, T25, T27, T30, T40. 690 Socket sizes: Ph 1 Ph 2. 690 PZD socket sizes: 1, 2, 3. Extension:2090-4, Driving Handle: 676, 699, Bit: 620. To be discontinued. Call or email to order. (1822373)

$350.70
(Picture)

Gedore
620
Gedore 620 Bit adapter 1/4" drive to 1/4" hex.

$15.99

. Sockets - 3/8"
.

. Sockets - 1/2" Drive .

19 10
Gedore 19 10 Socket 1/2" drive, 6 point, chrome-plated. (6130290)

$15.90

19 11
Gedore 19 11 Socket 1/2" drive, 6 point, chrome-plated.

$17.00

19 12
Gedore 19 12 Socket 1/2" drive, 6 point, chrome-plated.

$16.80

19 13
Gedore 19 13 Socket 1/2" drive, 6 point, chrome-plated.

$15.90

19 14
Gedore 19 14 Socket 1/2" drive, 6 point, chrome-plated.

$17.40

19 15
Gedore 19 15 Socket 1/2" drive, 6 point, chrome-plated.

$17.40

19 17
Gedore 19 17 Socket 1/2" drive, 6 point, chrome-plated.

$18.50

19 19
Gedore 19 19 Socket 1/2" drive, 6 point, chrome-plated.

$18.50

19 22 Gedore 19 22 Socket 1/2" drive, 6 point, chrome-plated.

$20.40

19 IMU-10 Gedore 19 IMU-10 Socket set, 1/2" drive, chrome, blue steel case, with 27 pieces (Code: 6139750). The case is 425 x 277 x 55mm. Only one available at special clearance price.

This set includes the following:

Type 19 Sockets, 6 Point - 10, 11, 12, 13, 14, 15, 17, 17, 19, 22, 24, 27, 30.

Type IN 19 Hex Sockets - 5, 6, 7, 8, 10, 12, 14.

Type IS 19 Flat Screwdriver Sockets - 8, 10.

Type IKS 19 Phillips Screwdriver Sockets - 2, 3.

Reversible Ratchet - 1993 U-10 T (6142620).

Extensions - 1990-5 and 1990-10.

Universal Joint - 1995 (6144750).

$479.00
~~$750.50~~
(Pic 1)
(Pic 2)
(Pic 3)
(Pic 5)

19 JMU-3
Gedore 19 JMU-3 Socket Set, 1/2" dr, chrome, blue steel case, 19 piece with socket sizes: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, , 21 ,22, 24. Ratchet: 1993 U-3 fine tooth, dial change. Extensions:1990-5 1990-10. Universal Joint: 1995. CODE: 2682842. Special Order.

$585.40
(Picture)

19 VMU-10
Gedore 19 VMU-10 Socket Set, 1/2" dr, chrome, blue steel case, 28 piece with socket sizes: 10, 11, 12, 13, 14, 15, 16, 17, 19, , 21 , 22, 23, 24, 26, 27, 28, 30, 32, 33, 34, 36.. Ratchet: 1993 U-10T lever change. T-Handle 1987, Extensions: 1990-5 1990-10. Universal Joint: 1995. CODE: 2682869. Special Order.

$885.50
(Picture)

Gedore
D 19 17 Gedore D 19 17 Socket, 1/2" dr, 12pt, 17mm, chrome, 39.5mm in length. (6134010)

$18.50

Gedore
D 19 19 Gedore D 19 19 Socket, 1/2" dr, 12pt, 19mm, chrome, 40.0mm in length.

$18.30

Gedore
D 19 24 Gedore D 19 24 Socket, 1/2" dr, 12pt, 24mm, chrome, 41.5mm in length.

$22.50

.

Sockets - 3/4" dr

Gedore
D 32 7/8AF
Gedore D 32 7/8AF Socket 7/8" with 3/4" drive, 12 point. (6274020)

$41.90

Gedore
D32-Sets Gedore D32-Sets Socket Sets, 3/4" drive, in blue steel box. Special Order Only More
Info

Sockets - 1-1/2" drive

Gedore
K 37 70
Gedore K 37 70 Impact Socket, 1-1/2" drive, 70mm. Order Code: 6328720.
$353.80

Gedore
K 37 80
Gedore K 37 80 Impact Socket, 1-1/2" drive, 80mm. Order Code: 6328990. $455.00

Gedore
K 37 90 Gedore K 37 90 Impact Socket. 1-1/2" drive, 90mm. Code 6329100
More
Info

.
SPARK PLUG TOOLS .

Gedore
DS 49 R Gedore DS 49 R Spark plug socket wrench with angled tommy bar. 5/8 x 13/16" Chrome-plated. Popular with Porsche 356 owners as a substitute for the original factory tool. Code: 6361340. Discontinued.

~~$59.99~~
(Picture)

Gedore
705 M Gedore 705 M Metric round wire spark plug gap gauge, 8 round blades of size 1.00mm, .90mm, .80mm, .75mm, .70mm, .60mm, .50mm, and .40mm. An electrode adjusting tool is included. Blades marked with the size. (6549570)

$36.40
(Picture)

.
SUSPENSION .

Gedore
1.70/2 Gedore 1.70/2 Tie Rod Removal Fork, 23mm fork opening. Overall length of around 14 inches. "Trenn - Montagegabel." It allows fast removal of track rod and push rod ends, steering arms and other steering parts. It is also good for removing shock absorbers and other separating and dismantling work. The forks are suitable for use in most confined spaces. Hammer blows on the handle end are used to separate the parts. (8029480)

$133.80
(Picture)

TOOL Box + Tool Case + Tool Trolley

Gedore
1335 L
Gedore 1335L Folding Tool Box. High Quality Made in Austria. Order Code: (6610580) Special Order.

Call or eMail for your discount price!



$398.70

Gedore
3010
Gedore 3010 VARIO Tool Trolley with Lowering Mechanism. Tools not included. Shipping to a commercial address only. Shipping is extra and depends on your address. (6625260)

Price on
Request

Gedore
E-1580/14
Spare Part, Set of 6, Lengthwise Divider 317x42 for Gedore 3010 Trolley, (5325840)
$14.99

Gedore
E-1580/11-80 Spare Part, Set of 2, Crosswise divider 80x40 for Gedore 3010 Trolley,   (5325760)
$6.99

TORQUE MULTIPLIER

DVV-40Z        Torque multiplier DREMOPLUS ALU 4000 Nm (2653087) $7,093.40

DVV-40ZRS    Torque multiplier DREMOPLUS ALU 4000 Nm (2653109) $8,307.20

RL-DVV40    Reaction arm L-form straight for DVV40, 1" (2653184) $3,154.80

RZ-DVV40
Reaction arm Z-form offset for DVV40 (2653176) $553.90

DVV-60ZRS    Torque Multiplier DREMOPLUS ALU 6000 Nm (2653117) $11,734.10

DVV-80ZRS Torque Multiplier DREMOPLUS ALU 8000 Nm (2653125) $18,601.60

RL-DVV60-80 Reaction arm L-form straight for DVV60-80, 1.1/2" (2654091) $4,616.20

RZ-DVV60    Reaction arm Z-form offset for DVV60 (2653192) $1,693.40

RZ-DVV80    Reaction arm Z-form offset for DVV80 (2653206) $1,925.40

DVV-100ZRS    Torque Multiplier DREMOPLUS ALU 10000 Nm (2653133)
$20,236.80

RZ-DVV100    Reaction arm Z-form offset for DVV100 (2653222) $6,447.60

DVV-130ZRS    Torque Multiplier DREMOPLUS ALU 13000 Nm (2653141) $25,230.80

RZ-DVV130    Reaction arm Z-form offset for DVV130 (2653230) $7,002.40

DVV-540RS
Torque Multiplier DREMOPLUS ALU 54000 Nm (2653168)

$45,554.20

DVI-20L        Torque Multiplier DREMOPLUS ALU 2000 Nm (2653249) $5,879.50

DVI-20Z        Torque Multiplier DREMOPLUS ALU 2000 Nm (2653265) $4,460.40

Torque Screwdrivers

756
Gedore type 756 Torque Screwdrivers for Industrial use. Adjustable torque screwdriver with scale. Actuation accuracy of +/- 6% tolerance. DIN EN ISO 6789.

756-00
756-00 (1498738) Torque Screwdriver, with 1/4" female hexagon drive, 159mm long, 8-40 centinewton meters. A 1/4" square/hexagon drive adapter is included, number 757-20.
$760.20

756-01
756-01 (1400150) Torque Screwdriver, with 1/4" female hexagon drive, 183mm long, 24-120 centinewton meters. A 1/4" square/hexagon drive adapter is included, number 757-20. $746.30

756-06
756-06 (1400169) Torque Screwdriver, with 1/4" female hexagon drive, 196mm long, 120-600 centinewton meters. A 1/4" square/hexagon drive adapter is included, number 757-20. Also included is a sliding T-Bar. $763.20

756-09
756-09 (1400177) Torque Screwdriver, with 1/4" female hexagon drive, 196mm long, 400-900 centinewton meters. A 1/4" square/hexagon drive adapter is included, number 757-20. Also included is a sliding T-Bar. $1,062.70

757

Gedore type 757 Torque Screwdrivers for Industrial use. Adjustable torque screwdriver with scale. Actuation accuracy of +/- 6% tolerance. DIN EN ISO 6789.

757-01
757-01 (7718050) Torque Screwdriver with 1/4" female hexagon drive, 169mm long, 24-120 centinewton meters. With number 757-20 square/hexagon 1/4" drive adaptor.
$626.50

757-06
757-01 (7718130) Torque Screwdriver with 1/4" female hexagon drive, 184mm long, 120-600 centinewton meters. With number 757-20 square/hexagon 1/4" drive adaptor. Also included is a sliding T-Bar. $966.00

757-09
757-01 (7718210) Torque Screwdriver with 1/4" female hexagon drive, 184mm long, 400-900 centinewton meters. With number 757-20 square/hexagon 1/4" drive adaptor. Also included is a sliding T-Bar. $918.00

758
Gedore type 758 Torque Screwdriver Type SP for test and installation working with electrical and electronic hardware. For industrial use. Actuation accuracy of +/- 6% tolerance. DIN EN ISO 6789.

758-05
758-05 (7096380) Torque Screwdriver with 1/4" female hexagon drive, 178mm long, 10-50 centinewton meters. With number 757-20 square/hexagon drive adaptor.
$816.10

758-10
758-10 (7096460) Torque Screwdriver with 1/4" female hexagon drive, 178mm long, 20-100 centinewton meters. With number 757-20 square/hexagon drive adaptor. $978.50

758-25
758-25 (7096540) Torque Screwdriver with 1/4" female hexagon drive, 250mm long, 50-250 centinewton meters. With number 757-20 square/hexagon drive adaptor. Also included is a sliding T-Bar. $701.60

758-50
758-50 (7096620) Torque Screwdriver with 1/4" female hexagon drive, 250mm long, 100-500 centinewton meters. With number 757-20 square/hexagon drive adaptor. Also included is a sliding T-Bar. $701.60

.

TORQUE WRENCHES
NOTE: All torque tools are special order.
Only a small sample is listed here.
POR = Price on Request .

Gedore
8612
TorqueTester
Electronic torque tester DREMOTEST E
Switchable from Nm to lbf-ft readout. Accuracy of +/- 1% measurement. Available in 5 models in the range .2 to 3150Nm
( Features ) (Available Sizes)

Price on
Request

Gedore
753-11 Gedore 753-11 Torque Wrench Dual Scale Dremometer Mini 2-12Nm (18-106 lbf-in). With 1/4" square drive. Actuation with tactile impulse and audible signal. Tolerance +/- 3% of scale. Supplied with calibration certificate to DKD standards. To see the Specifications, click here. (1957694)

$768.70

Gedore
754
Ratchet Adaptor Head for use with torque wrench.

Price on Request

Gedore
4100-01
Gedore 4100-01 Torque Wrench TORCOFIX SE, Box end size 9x12mm, 20-100nm, length 369.5mm. Order Code: 7600210.
$702.50

Gedore
4405-05
Gedore 4405-05 Torque Wrench TORCOFIX Z, Spigot end size 16, 10-50nm, length 328mm. Order Code: 1646176.
$177.80

Gedore
4550-85S Mushroom Head Torcofix K Torque Wrech 1/2" drive Coupler. Code 7079370

$15.90

Gedore
4550-10
Gedore 4550-10 (7601530) Torque Wrench TORCOFIX K 1/2" 20-100nm Length 395mm Special order only!!

$438.50
(Picture)

Gedore
4550-20 Gedore 4550-20 (7601610) Torque Wrench TORCOFIX K 1/2" 40-200Nm, Length 486mm
$470.90

Gedore
4550-30 Gedore 4550-30 (7601880) Torque Wrench TORCOFIX K 1/2" 60-300Nm, Length 578mm
$540.60

Gedore
4550-40 Gedore 4550-40 (7674330) Torque Wrench TORCOFIX K 1/2" 80-400Nm, Length 686mm
$884.30

Gedore
4550-55 Gedore 4550-55 (7674760) Torque Wrench TORCOFIX K 1/2" 110-550Nm, Length 958mm
$1,413.10

Gedore
4550-75 Gedore 4550-75 (1521365)Torque Wrench TORCOFIX K 1/2" 150-750Nm, Length 1,233mm
$1,601.10

Gedore
8554-01
Gedore 8554-01 (7775440) Torque Wrench DREMOMETER. 1/4" drive, 268mm long, 6-30Nm. Comes in a plastic box.

$893.80

Gedore
8559-01 Gedore 8554-01 (7775870) Torque Wrench DREMOMETER. Double Square 1/4" drive, 268mm long, 6-30Nm. Comes in a plastic box.

$921.40

Gedore
8564-01
Gedore 8564-01 (7695250) Torque Wrench DREMOMETER. 1" drive, 750-2000Nm. With extension tubes 8564-92 and 8572-74. Overall length with longest tube is 2353mm, and without tube is 932mm.

$5,455.70

Gedore
8564-02 Gedore 8564-02 (7695680) Torque Wrench DREMOMETER. 1" drive, 750-2000Nm. With extension tubes 8564-92 and 8572-74. Overall length with longest tube is 2353mm, and without tube is 932mm. Comes in a sheet-metal case.
$6,268.80

Gedore
8564-03 Gedore 8564-01 (7696060) Torque Wrench DREMOMETER SET. 1" drive, 750-2000Nm. With extension tubes 8564-92 and 8572-74. Overall length with longest tube is 2353mm, and without tube is 932mm. Set includes: Type D 21 sockets, sizes 36mm, 41mm, 46mm, 50mm, 55mm, 60mm, 65mm, 70mm; 754-06 Ratchet head.
$8,051.70

Gedore
8574-10
Gedore 8574-10 (1427156) Torque Wrench DREMOMETER. 3/4" drive, 812mm long, 110-550Nm. Comes in a plastic box.
$2,576.10

Gedore
8579-10 Gedore 8579-10 (1427121) Torque Wrench DREMOMETER. Double Square 3/4" drive, 812mm long, 110-550Nm. Comes in a plastic box. $2,607.40

Gedore
8576-01
Gedore 8576-01 (7694360) Torque Wrench DREMOMETER. Double Square 3/4" Drive, 520-1000Nm. Included is an extension tube number 8571-80. Length without tube is 812mm, and 1403mm with the tube.

$3,367.80

Rahsol
7112 Rahsol 7112 open end insert tools 9x12 mounting for TorcoFix-SE, etc. More Info

Gedore
7112-07 Gedore 7112-07mm Open End Insert Tool 9x12 Mounting, 7mm. (7688390)

$100.30

Gedore
7112-08 Gedore 7112-08mm Open End Insert Tool 9x12 Mounting, 8mm. (7688550)

$100.30

Gedore
7112-09 Gedore 7112-09mm Open End Insert Tool 9x12 Mounting, 9mm. (7679050)

$100.30

Gedore
7112-10 Gedore 7112-10mm Open End Insert Tool 9x12 Mounting, 10mm. (7688630)

$100.30

Gedore
7112-11mm Gedore 7112-11mm Open End Insert Tool 9x12 Mounting, 11mm. (7688980)

$100.30

Gedore
7112-12 Gedore 7112-12mm Open End Insert Tool 9x12 Mounting, 12mm. (7679560).

$100.30

Gedore
7112-13 Gedore 7112-13mm Open End Insert Tool 9x12 Mounting, 13mm. (7689010)

$100.30

Gedore
7112-14 Gedore 7112-14mm Open End Insert Tool 9x12 Mounting, 14mm. (7689360)

$100.30

Gedore
7112-15 Gedore 7112-15mm Open End Insert Tool 9x12 Mounting, 15mm. (7689440)

$100.30

Gedore
7112-16 Gedore 7112-16mm Open End Insert Tool 9x12 Mounting, 16mm. (7679990)

$100.30

Gedore
7112-17 Gedore 7112-17mm Open End Insert Tool 9x12 Mounting, 17mm. (7689600)

$100.30

Gedore
7112-18 Gedore 7112-18mm Open End Insert Tool 9x12 Mounting, 18mm. (7684560)

$100.30

Gedore
7112-19 Gedore 7112-19mm Open End Insert Tool 9x12 Mounting, 19mm. (7689790)

$100.30

Torque Wrench Aluminum

7775440
Gedore 8554-01 Aluminum Torque Wrench 1/4" dr. 6-30 Nm
Price on
Request

7775870
Gedore 8559-01 Aluminum Torque Wrench 1/4" dr. 6-30 Nm, Double-Square Drive
POR

7682000
Gedore 8560-01 Aluminum Torque Wrench 3/8" dr. 8-40 Nm POR

7682190
Gedore 8565-01 Aluminum Torque Wrench 3/8" dr. 8-40 Nm, Double-Square Drive POR

7683320
Gedore 8561-01 Aluminum Torque Wrench 1/2" dr. 20-120 Nm POR

7683400
Gedore 8566-01 Aluminum Torque Wrench 1/2" dr. 20-120 Nm, Double-Square Drive POR

7685530
Gedore 8573-00 Aluminum Torque Wrench 1/2" dr. 40-200 Nm POR

7683670
Gedore 8578-00 Aluminum Torque Wrench 1/2" dr. 40-200 Nm, Double-Square Drive POR

1905449
Gedore 8573-10 Aluminum Torque Wrench 1/2" dr. 40-200 Nm
POR

7685450
Gedore 8562-10 Aluminum Torque Wrench 1/2" dr. 50-300 Nm POR

7685960
Gedore 8567-10 Aluminum Torque Wrench 1/2" dr. 50-300 Nm, Double-Square Drive POR

7688470
Gedore 8570-10 Aluminum Torque Wrench 3/4" dr. 80-360 Nm POR

7688710
Gedore 8575-10 Aluminum Torque Wrench 3/4" dr. 80-360 Nm, Double-Square Drive POR

1427156
Gedore 8574-10 Aluminum Torque Wrench 3/4" dr. 110-550 Nm POR

1427121
Gedore 8579-10 Aluminum Torque Wrench 3/4" dr. 110-550 Nm, Double-Square Drive POR

7691500
Gedore 8563-10 Aluminum Torque Wrench 3/4" dr. 140-760 Nm POR

7691850
Gedore 8568-10 Aluminum Torque Wrench 3/4" dr. 140-760 Nm, Double-Square Drive POR

7670180
Gedore 8563-01 Aluminum Torque Wrench 3/4" dr. 140-760 Nm POR

7670500
Gedore 8568-01 Aluminum Torque Wrench 3/4" dr. 140-760 Nm, Double-Square Drive POR

7694010
Gedore 8571-01 Aluminum Torque Wrench 3/4" dr. 520-1000 Nm POR

7694360
Gedore 8576-01 Aluminum Torque Wrench 3/4" dr. 520-1000 Nm, Double-Square Drive POR

2311267
Gedore 8581-01 Aluminum Torque Wrench 1" dr. 600-1500 Nm POR

2311291
Gedore 8586-01 Aluminum Torque Wrench 1" dr. 600-1500 Nm, Double-Square Drive POR

7694010 Gedore 8571-01 DX Aluminum Torque Wrench 3/4" dr 520-1000 Nm, Square Drive

Price on
Request
(Picture)

7695250
Gedore 8564-01 Aluminum Torque Wrench 1" dr. 750-2000 Nm

Price on
Request
(Picture)

7695410
Gedore 8569-01 Aluminum Torque Wrench 1" dr. 750-2000 Nm, Double-Square Drive POR

7717160
Gedore 8572-01 Aluminum Torque Wrench 1.1/2" dr. 1500-3000 Nm POR

Gedore
8571-01
Gedore 8571-01 Type DX Torque Wrench 3/4" drive. 812mm long. 35mm high. Comes in cardboard packaging with extension tube. Range is 520-1000 Nm.
Order code: 7694010

$3,346.90
(Picture)

Spigot End
Torque Wrench

More
Information

VDE Sets

1100-1094 Set
VDE Tool Assortment. 53 Pieces. Order Code: 2979063

Call or Email for more

information.

US-KIT-17-EL
Necessary Professional Electricians Kit. (2639548)

To see a list of contents, click here. CALL or email to order!

Sold
Out

US-KIT-52-VDE
VDE Electricians Set. (2639556)


To see a list of contents, click here. CALL or email to order!

Sold
Out

.

.

Wad Punch
.

Gedore Wad Punch type 5700 (formerly Dako brand). Also called Arc Punch, Hollow Punch, Hole Punch. For stamping out cardboard, leather, rubber, and other soft materials. Cutting edge hardened, shaft enameled blue. Made to DIN 7200 Form A. Available in size 2mm to 100mm Price on Request.

Type 5700

Gedore
5700 02 Gedore 5700 02 arc punch 2mm. (4542300)

$14.60

Gedore
5700 03 Gedore 5700 03 arc punch 3mm.

$14.60

Gedore
5700 04 Gedore 5700 04 arc punch 4mm.

$14.60

Gedore
5700 05 Gedore 5700 05 arc punch 5mm.

$14.60

Gedore
5700 06 Gedore 5700 06 arc punch 6mm.

$14.60

Gedore
5700 07 Gedore 5700 07 arc punch 7mm.

$14.90

Gedore
5700 08 Gedore 5700 08 arc punch 8mm.

$14.90

Gedore
5700 09 Gedore 5700 09 arc punch 9mm.
$15.30

Gedore
5700 15 Gedore 5700 15 arc punch 15mm.

$28.20

Gedore
5700 16 Gedore 5700 16 arc punch 16mm.

$31.00

Gedore
5700 17 Gedore 5700 17 arc punch 17mm.

$33.40

Gedore
5700 20
Gedore 5700 20 arc punch 20mm.

$42.70

Wire Nippers

Gedore
8370-180
Lever-action end cutting nippers. For hard wire or piano wire. Double lever mechanism. C65 forged tool steel. Old pattern. (6750830)
$143.60
(Picture)

.
WRENCH - Adjustable .

Gedore 60 CP Adjustable open end spanners. Jaw set at 15 degrees. Features a Swedish pattern roller with left hand thread with a scale. Chrome-vanadium steel, chrome-plated, polished head. Also available in an insulated version type V 60 CP, please contact us for a quote.

Gedore
60 CP 6 Gedore 60 CP 6 Adjustable open end spanner, 6" (155mm). Jaw set at 15 degrees. (6380990)
$29.80

Gedore
60 CP 8
Gedore 60 CP 8 Adjustable open end spanner, 8" (205mm). Jaw set at 15 degrees. (6381020)
$39.40

Gedore
60 CP 10
Gedore 60 CP 10 Adjustable open end spanner, 10" (255mm). Jaw set at 15 degrees. (6381100)
$50.90

Gedore
60 CP 12
Gedore 60 CP 12 Adjustable open end spanner, 12" (305mm). Jaw set at 15 degrees. (6381290)
$70.20

.

WRENCH - Combination Type 1 B
.

. .

Gedore
1 B 6mm
Gedore 1 B 6mm Wrench, Combination open-box, 10 degree offset box end, 100mm long. (6000400)

$20.40

Gedore
1 B 7mm
Gedore 1 B 7mm Wrench, Combination open-box, 10 degree offset box end, 112mm long

$20.40

Gedore
1 B 8mm Gedore 1 B 8mm Wrench, Combination open-box, 10 degree offset box end, 125mm long

$20.10

Gedore
1 B 9mm Gedore 1 B 9mm Wrench, Combination open-box, 10 degree offset box end, 138mm long

$22.40

Gedore
1 B 10mm Gedore 1 B 10mm Wrench, Combination open-box, 10 degree offset box end, 148mm long

$22.60

Gedore
1 B 11mm Gedore 1 B 11mm Wrench, Combination open-box, 10 degree offset box end, 158mm long

$24.30

Gedore
1 B 12mm Gedore 1 B 12mm Wrench, Combination open-box, 10 degree offset box end, 168mm long

$25.50

Gedore
1 B 13mm Gedore 1 B 13mm Wrench, Combination open-box, 10 degree offset box end, 185mm long

$27.70

Gedore
1 B 14mm Wrench, Combination open-box, 10 degree offset box end, 198mm long

$27.90

Gedore
1 B 15mm Gedore 1 B 15mm Wrench, Combination open-box, 10 degree offset box end, 210mm long

$33.10

Gedore
1 B 16mm Gedore 1 B 16mm Wrench, Combination open-box, 10 degree offset box end, 220mm long

$35.70

Gedore
1 B 17mm Gedore 1 B 17mm Wrench, Combination open-box, 10 degree offset box end, 232mm long

$37.00

Gedore
1 B 18mm Gedore 1 B 18mm Wrench, Combination open-box, 10 degree offset box end, 245mm long

$41.40

Gedore
1 B 19mm Gedore 1 B 19mm Wrench, Combination open-box, 10 degree offset box end, 258mm long

$43.30

Gedore
1 B 20mm
Gedore 1 B 20mm Wrench, Combination open-box, 10 degree offset box end, 270mm long

$45.40

Gedore
1B-set10m Gedore 1B-set10m Wrench Set, Combination open-box, 10 degree offset box end, Set 10-19mm

$287.00
(Picture)

Gedore
1 B 21mm Gedore 1 B 21mm Wrench, Combination open-box, 10 degree offset box end, 280mm long

$47.70
(Picture)

Gedore
1 B 22mm Gedore 1 B 22mm Wrench, Combination open-box, 10 degree offset box end, 292mm long

$52.90

Gedore
1 B 23mm Gedore 1 B 23mm Wrench, Combination open-box, 10 degree offset box end, 305mm long

$57.80

Gedore
1 B 24mm Gedore 1 B 24mm Wrench, Combination open-box, 10 degree offset box end, 318mm long

$60.40

Gedore
1 B 27mm
Gedore 1 B 27mm Wrench, Combination open-box, 10 degree offset box end, 352mm long

$68.30

Gedore
1 B 30mm Gedore 1 B 30mm Wrench, Combination open-box, 10 degree offset box end, 390mm long

$87.20

Gedore
1 B 32mm Gedore 1 B 32mm Wrench, Combination open-box, 10 degree offset box end, 412mm long

$91.40

Gedore
1 B 33mm Gedore 1 B 33mm Wrench, Combination open-box, 10 degree offset box end, 412mm long.

$103.60

Gedore
1 B 34mm Gedore 1 B 34mm Wrench, Combination open-box, 10 degree offset box end, 412mm long.

$118.50

Gedore
1 B 36mm Gedore 1 B 36mm Wrench, Combination open-box, 10 degree offset box end, 460mm long.

$157.30

Gedore
1 B 75mm Gedore 1 B 75 Wrench, 75mm, Combination open-box, 10 degree offset box end, 810mm long.

$1,443.90
(Picture)

Gedore
1 B 80mm
Gedore 1 B 80 Wrench, 80mm, Combination open-box, 10 degree offset box end, 860mm long.

$1,692.70
(Picture)

Gedore
1B Wrenches Gedore 1B Wrench, Combination open-box, 10 degree offset box end. Sizes available up to 80mm!!
Special order only! Price on
Request

WRENCH - Combination - Short Type 7

"Slim Line" short version. 15 degree offset box end. Made to DIN 3113 Form A. ISO 3318,
ISO 7738. Chrome Vanadium Steel 31CrV3 Matt Chrome Plated.

Gedore
7 6

Gedore 7 6 Combination wrench, 6mm. 100mm in length. Code: 6089550

$17.40

Gedore
7 7
Gedore 7 7 Combination wrench, 7mm. 110mm in length. Code: 6089630

$17.40

Gedore
7 8
Gedore 7 8 Combination wrench, 8mm. 120mm in length. Code: 6089710

$18.00

Gedore
7 9 Gedore 7 9 Combination wrench, 9mm. 130mm in length. Code: 6089980

$18.70

Gedore
7 10 Gedore 7 10 Combination wrench, 10mm. 140mm in length. Code: 6090050

$18.50

Gedore
7 11 Gedore 7 11 Combination wrench, 11mm. 150mm in length. Code: 6090130

$20.40

Gedore
7 12 Gedore 7 12 Combination wrench, 12mm. 160mm in length. Code: 6090210

$21.70
(Picture)

Gedore
7 13 Gedore 7 13 Combination wrench, 13mm. 170mm in length. Code: 6090480

$21.70

Gedore
7 14 Gedore 7 14 Combination wrench, 14mm. 180mm in length. Code: 6090560

$23.40

Gedore
7 15 Gedore 7 15 Combination wrench, 15mm. 190mm in length. Code: 6090640

$24.80

Gedore
7 16 Gedore 7 16 Combination wrench, 16mm. 200mm in length. Code: 6091610

$26.70

Gedore
7 17 Gedore 7 17 Combination wrench, 17mm. 210mm in length. Code: 6090720

$25.80

Gedore
7 18 Gedore 7 18 Combination wrench, 18mm. 220mm in length. Code: 6091880

$30.80

Gedore
7 19 Gedore 7 19 Combination wrench, 19mm. 230mm in length. Code: 6090800

$30.10

Gedore
7 21 Gedore 7 21 Combination Wrench, 21mm. 252mm in length. Code: 6092180
{other sizes on request}

$37.30
(Picture)

Gedore
7 22 Gedore 7 22 Combination wrench, 22mm. 262mm in length. Code: 6090990

$41.30

Gedore
7 23 Gedore 7 23 Combination wrench, 23mm. 270mm in length. Code: 6092260

$43.20

Gedore
7 24 Gedore 7 24 Combination wrench, 24mm. 282mm in length. Code: 6091020

$46.80

Gedore
7 26 Gedore 7 26 Combination wrench, 26mm. 302mm in length. Code: 6092420

$47.60

Gedore
7 28 Gedore 7 28 Combination wrench, 28mm. 320mm in length. Code: 6092500

$61.70

Gedore
7-011 Gedore 7-011 (6093070) Combination Wrench Set with 11 metric wrenches: 8, 9, 10, 11, 12, 13, 14, 15, 17, 19, 22mm
Special order only!
$264.50
(Picture)

Additional sets offered, contact us to find the right one for you!

.

Wrench - Combination - American Sizes
.

Gedore
1 B 1/4AF Gedore 1 B 1/4AF Wrench, combination, same size each end, ring offset from shaft. 1/4", 3.75" long. (6005120)

$20.60

Gedore
1 B 5/16AF Gedore 1 B 5/16AF Wrench, combination, same size each end, ring offset from shaft. 5/16", 4.75" long.

$21.00

Gedore
1 B 3/8AF Gedore 1 B 3/8AF Wrench, combination, same size each end, ring offset from shaft. 3/8", 5.5" long.

$23.40

Gedore
1 B 7/16AF Gedore 1 B 7/16AF Wrench, combination, same size each end, ring offset from shaft. 7/16", 6" long.

$25.70

Gedore
1 B 1/2AF Gedore 1 B 1/2AF Wrench, combination, same size each end, ring offset from shaft. 1/2", 7" long.

$27.90

Gedore
1 B 9/16AF Gedore 1 B 9/16AF Wrench, combination, same size each end, ring offset from shaft. 9/16", 7.5" long.

$31.20

Gedore
1 B 5/8AF Gedore 1 B 5/8AF Wrench, combination, same size each end, ring offset from shaft. 5/8", 8.25" long.

$35.20
(Picture)

Gedore
1 B 11/16AF Gedore 1 B 11/16AF Wrench, combination, same size each end, ring offset from shaft. 11/16"

$41.40

Gedore
1 B 3/4AF Gedore 1 B 3/4AF Wrench, combination, same size each end, ring offset from shaft. 3/4"

$49.60

Gedore
1 B 13/16AF Gedore 1 B 13/16AF Wrench, combination, same size each end, ring offset from shaft. 13/16"

$48.40

Gedore
1 B 7/8AF Gedore 1 B 7/8AF Wrench, combination, same size each end, ring offset from shaft. 7/8"

$58.00

Gedore
1 B 15/16AF
Gedore 1 B 15/16AF Wrench, combination, same size each end, ring offset from shaft. 15/16" $62.40

Gedore
1 B 1AF Gedore 1 B 1AF Wrench, combination, same size each end, ring offset from shaft. 1"

$63.40

Gedore
1 B-1-1/16AF
6006600
Gedore 1 B-1-1/16AF Wrench, combination, same size each end. 352mm long.

$69.70

Gedore
1 B-1-1/8AF
6006790
Gedore 1 B-1-1/18AF Wrench, combination, same size each end. 370mm long.

$83.00

Gedore
1 B-1-1/4AF
6006870
Gedore 1 B-1-1/14AF Wrench, combination, same size each end. 412mm long.

$95.90

Gedore
1 B-08
(6013300)
American-inch size combination wrench set with 10 degree offset box ends. The mat chrome plating is a dull finish that prevents light from reflecting off the wrench when working in confined areas. It is less slippery in oily hands. This is a high quality finish widely used in German tool manufacturing. Marked with the size across the flats. This set includes 8 wrenches of the following American sizes: 3/8AF, 7/16AF, 1/2AF, 9/16AF, 5/8AF, 3/4AF, 7/8AF, and a 1" AF. Please note: These wrenches are shipped loose with no box. $308.80
(Picture)

.**********

WRENCH - Crowfoot .

Gedore
E2000
Gedore
Gedore E2000 Crowfoot Wrenches are available with or without the tommy bar. .

Gedore
3114 13 Gedore 3114 13 (6670050) Wrench, Crowfoot 13mm (Tommy Bar #26 D 8 sold separately)
$62.30

Gedore
3114 14 Gedore 3114 14 Wrench, Crowfoot 14mm (Tommy Bar #26 D 8 sold separately)
$63.60

Gedore
3114 17 Gedore 3114 17 Wrench, Crowfoot 17mm (Tommy Bar #26 D 10 sold separately)
$72.00

Gedore
3114 19 Gedore 3114 19 Wrench, Crowfoot 19mm (Tommy Bar #26 D 12 sold separately)
$81.90

Gedore
3114 22 Gedore 3114 22 Wrench, Crowfoot 22mm (Tommy Bar #26 D 12 sold separately)
$95.60

Gedore
3114 24 Gedore 3114 24 Wrench, Crowfoot 24mm (Tommy Bar #26 D 14 sold separately)
$117.50
(Picture)

Gedore
3114 27 Gedore 3114 27 Wrench, Crowfoot 27mm (Tommy Bar #26 D 14 sold separately)
$129.50

Gedore
626 S 1
Gedore 626 S 1 Stepped Tommy Bar 190mm. Vanadium steel, chrome plated and fully hardened. (6528060)

$10.70

Gedore
26 D 5
Gedore 26 D 5 Tommy bar 5mm. 125mm in length. 6208310 Discontinued, limited stock available.

$6.19

Gedore
26 D 6 Gedore 26 D 6 Tommy bar 6mm. 160mm in length. 6208580

$8.30

Gedore
26 D 8 Gedore 26 D 8 Tommy bar 8mm. Fits 13mm & 14mm crowfoot wrenches. 6208740

$10.10

Gedore
26 D 10 Gedore 26 D 10 Tommy bar 10mm. Fits 17mm crowfoot. 6208820

$12.80

Gedore
26 D 12 Gedore 26 D 12 Tommy bar 12mm. Fits 19mm & 22mm crowfoot wrenches. 6208900

$16.00

Gedore
26 D 14 Gedore 26 D 14 Tommy bar 14mm. Fits 24mm & 27mm crowfoot wrenches. 6209040

$23.10

Gedore
26 D 16 Gedore 26 D 16 Tommy bar 16mm. Fits 20mm & 32mm crowfoot wrenches. 6209120

$35.40
(Picture)

Gedore
26 RS 1
Gedore 26 RS 1 Stepped tommy bar 5mm and 6mm that is fully hardened. 190mm length. (6219350)

$14.70
(Picture)

Gedore
26 RS 2
Gedore 26 RS 2 Stepped tommy bar 8mm and 10 mm that is fully hardened. 240mm length.

$20.30

Gedore
26 RS-626
S-3 Gedore 26 RS-626 S-3 Stepped tommy bar 11.7, 13.7 and 16mm that is fully hardened, 310mm length. (6528220)
$21.00

WRENCH - Double Box End

Gedore
4-8 Gedore 4-8 Thin-walled double box ended wrench set. Type 4 wrench. This 8 piece set consists of the most popular wrench sizes: 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22mm.Vanadium steel 31CrV3, chrome-plated. (6061700)

$276.80

Gedore
4-10x13 Gedore 4-10x13 Thin-walled double box ended wrench. Vanadium steel 31CrV3, chrome-plated. Overall length 133mm. (6053520)

$32.30

Gedore
4-13x17 Gedore 4-13x17 Thin-walled double box ended wrench. Vanadium steel 31CrV3, chrome-plated. Overall Length 167mm
$37.10
(Picture)

.
WRENCH - Deep Offset - Double Box End - Metric
.

Gedore
2 6x7
Gedore 2 6x7 Rings deep offset, strong thin walls. 170mm long, Chrome plated. 6x7mm. (6015350)

$24.10

Gedore
2 7x8
Gedore 2 7x8 Rings deep offset, strong thin walls. 180mm long, Chrome plated. 7x8mm

$29.60

Gedore
2 8x9
Gedore 2 8x9 Rings deep offset, strong thin walls. 182mm long, Chrome plated. 8x9mm

$24.50

Gedore
2 10x11
Gedore 2 10x11 Rings deep offset, strong thin walls. 195mm long, Chrome plated. 10x11mm

$26.80

Gedore
2 12x13
Gedore 2 12x13 Rings deep offset, strong thin walls. 212mm long, Chrome plated. 12x13mm

$28.50

Gedore
2 14x15
Gedore 2 14x15 Rings deep offset, strong thin walls. 225mm long, Chrome plated. 14x15mm

$31.20

Gedore
2 16x17
Gedore 2 16x17 Rings deep offset, strong thin walls. 245mm long, Chrome plated. 16x17mm

$34.80

Gedore
2 18x19
Gedore 2 18x19 Rings deep offset, strong thin walls. 265mm long, Chrome plated. 18x19mm

$38.20

Gedore
2 20x22
Gedore 2 20x22 Rings deep offset, strong thin walls. 287mm long, Chrome plated. 20x22mm

$44.80

Gedore
2 21x23
Gedore 2 21x23 Rings deep offset, strong thin walls. 305mm long, Chrome plated. 21x23mm

$54.60

Gedore
2 24x26
Gedore 2 24x26 Rings deep offset, strong thin walls. 325mm long, Chrome plated. 24x26mm

$64.80

Gedore
2 25x28
Gedore 2 25x28 Rings deep offset, strong thin walls. 345mm long, Chrome plated. 25x28mm

$67.00

Gedore
2 27x32 Gedore 2 27x32 Rings deep offset, strong thin walls. 370mm long, Chrome plated. 27x32mm

$77.10

Gedore
2-12 Set
Gedore Type 2 Metric Wrench Set, deep offset, double box end. With 12 Wrenches. Non glare matte chrome plating. Sizes 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22, 21x23, 24x26, 25x28, 27x32. Code (6030900)

$515.20
(Picture)

.
WRENCH - Hex key .

Gedore
DTT 42 8 Gedore DTT 42 8 Tri-T 8mm hex key (code 1669583). 8mm.

$57.10
(Picture)

Gedore
42 4
Gedore 42 4 Hexagon Allen Key for in-hex screws, 4mm. 74mm long. GEDORE vanadium steel and zinc-plated. (6340690)

$3.30

Gedore
42 6 Gedore 42 6 Hexagon Allen Key for in-hex screws, 6mm. 96mm long. GEDORE vanadium steel and zinc-plated. (6340850)

$3.50

Gedore
42 12
Gedore 42 12 Hexagon Allen Key for in-hex screws, 12mm. 137mm long. GEDORE vanadium steel and zinc-plated. (6341310)

   $12.80

Gedore
42 14
Gedore 42 14 Hexagon Allen Key for in-hex screws, 14mm. 154mm long. GEDORE vanadium steel and chrome-plated. (6341580)

$24.00

Gedore
42 17
Gedore 42 17 Hexagon Allen Key for in-hex screws, 17mm. 177mm long. GEDORE vanadium steel and chrome-plated. (6341660)

$35.70

Gedore
42 19
Gedore 42 19 Hexagon Allen Key for in-hex screws, 19mm. 199mm long. GEDORE vanadium steel and chrome-plated. (6341740)

$40.80

Gedore
42 22
Gedore 42 22 Hexagon Allen Key for in-hex screws, 22mm. 222mm long. GEDORE vanadium steel and chrome-plated. (6341820)

$58.70
(Picture)

Gedore
H 42 DKEL-88
(2797186)
Gedore H 42 DKEL-88 Hex Key Set, Double Ball End. Includes sizes 2, 2.5, 3, 4, 5, 6, 8, 10mm. (2797186)

$119.80
~~$133.10~~
(Picture)

Gedore
42 Z .
See individual socket keys below. .

Gedore
42 Z 5 Gedore 42 Z 5 Hexagon socket key with pilot. Chrome-vanadium steel. 80mm long. 90 degree bend. (6343280)

$4.70

Gedore
42 Z 6 Gedore 42 Z 6 Hexagon socket key with pilot. Chrome-vanadium steel. 90mm long. 90 degree bend. (6343360)

$5.50

Gedore
42 Z 7 Gedore 42 Z 7 Hexagon socket key with pilot. Chrome-vanadium steel. 95mm long. 90 degree bend. (6343440)

$8.40

Gedore
42 Z 8 Gedore 42 Z 8 Hexagon socket key with pilot. Chrome-vanadium steel. 100mm long. 90 degree bend. (6343520)

$8.40

Gedore
42 Z 10 Gedore 42 Z 10 Hexagon socket key with pilot. Chrome-vanadium steel. 112mm long. 90 degree bend. (6343600)

$15.10

Gedore
42 Z 12 Gedore 42 Z 12 Hexagon socket key with pilot. Chrome-vanadium steel. 125mm long. 90 degree bend. (6343790)

$21.10

Gedore
42 Z 14 Gedore 42 Z 14 Hexagon socket key with pilot. Chrome-vanadium steel. 140mm long. 90 degree bend. (6343870)
Discontinued - Limited Quantity

$25.05

Gedore
42 Z 17 Gedore 42 Z 17 Hexagon socket key with pilot. Chrome-vanadium steel. 160mm long. 90 degree bend. (6343950)
Discontinued - Limited Quantity

$40.06
(Picture)

Gedore
PH 42-88 Gedore PH 42-88 Hexagon Allen Key Set for in-hex screws, in a blue plastic holder. Type 42 with 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, and a 10mm. Order Code 6352000

$34.70

.

.123456789 WRENCH - Hook with Lug
.

Gedore
40 16-20
Gedore 40 16-20 Hook Spanner with lug, 110mm. For slotted round nuts 16-20mm diameter. (6333990)

$25.40

Gedore
40 25-28
Gedore 40 25-28 Hook spanner with lug, 135mm. For slotted round nuts 25-28mm diameter. (6334020)

$25.80

Gedore
40 30-32 Gedore 40 30-32Hook Spanner with lug, 135mm. For slotted round nuts 30-32mm diameter. (6334100)

$25.80
(Picture)

Gedore
40 34-36 Gedore 40 34-36 Hook Spanner with lug, 170mm. For slotted round nuts 34-36mm diameter. (6334290)

$27.70

Gedore
40 40-42 Gedore 40 40-42 Hook Spanner with lug, 170mm. For slotted round nuts 40-42mm diameter. (6334370)

$27.70
(Picture)

Gedore
40 45-50 Gedore 40 45-50 Hook Spanner with lug, 205mm. For slotted round nuts 45-50mm diameter. (6334450)

   $41.90

Gedore
40 52-55
Gedore 40 52-55 Hook Spanner with lug, 205mm. For slotted round nuts 52-55mm diameter. (6334530)

$31.20

Gedore
40 58-62
Gedore 40 58-62 Hook Spanner with lug, 240mm. For slotted round nuts 58-62mm diameter. (6334610)

$37.00

Gedore
40 68-75
Hook Spanner with lug, 240mm. For slotted round nuts 68-75mm diameter. (6334880)

$37.00

Gedore
40 80-90 Gedore 40 80-90 Hook Spanner with lug, 280mm. For slotted round nuts 80-90mm diameter. (6334960)

$46.40

Gedore
40 95-100
Gedore 40 95-100 Hook Spanner with lug, 280mm. For slotted round nuts 95-100mm diameter. (6335180)

$46.40

Gedore
40 110-115
Gedore 40 110-115 Hook Spanner with lug, 335mm. For slotted round nuts 110-115mm diameter. (6335260)

$66.20

Gedore
40 120-130
Gedore 40 120-130 Hook Spanner with lug, 335mm. For slotted round nuts 120-130mm diameter. (6335340)

$66.20

Gedore
40 135-145
Gedore 40 135-145 Hook Spanner with lug, 385mm. For slotted round nuts 135-145mm diameter. (6335420) Special Order
$94.60

Gedore
40 155-165
Gedore 40 155-165 Hook Spanner with lug, 385mm. For slotted round nuts 155-165mm diameter. (6335500) Special Order
$94.60

Gedore
40 180-195
Gedore 40 180-195 Hook Spanner with lug, 465mm. For slotted round nuts 180-195mm diameter. (6335690) Special Order
$249.00

Gedore
40 205-220
Gedore 40 205-220 Hook Spanner with lug, 465mm. For slotted round nuts 205-220mm diameter. (6335770) Special Order
$249.00

WRENCH - Hook with Pin

Gedore
40Z Gedore 40 Z Pin Spanners. Available from 16-18 mm to 205-220 mm size.

Price on Request

***********

Gedore
40 Z 16-18
6335850
Gedore 40 Z 16-18 Hook wrench with pin .110mm long, 2.5mm pin.
$31.00

Gedore
40 Z 20-22
6335930
Gedore 40 Z 20-22 Hook wrench with pin .110mm long, 2.5mm pin. $31.00

Gedore
40 Z 25-28
6336580 Gedore 40 Z 25-28 Hook wrench with pin .135mm long, 3.0mm pin. $31.00

Gedore
40 Z 30-32
6336660
Gedore 40 Z 30-32 Hook wrench with pin .135mm long, 4.0mm pin. $31.00

Gedore
40 Z 34-36
6336740 Gedore 40 Z 34-36 Hook wrench with pin .170mm long, 4.0mm pin. $35.10

Gedore
40 Z 40-42
6336820 Gedore 40 Z 40-42 Hook wrench with pin .170mm long, 4mm pin.

$35.10

Gedore
40 Z 45-50
6336900 Gedore 40 Z 45-50 Hook wrench with pin .205mm long, 5.0mm pin. $38.60

Gedore
40 Z 52-55
6337040 Gedore 40 Z 52-55 Hook wrench with pin .205mm long, 5.0mm pin.

$38.60

Gedore
40 Z 58-62
6337120 Gedore 40 Z 58-62 Hook wrench with pin .240mm long, 5.0mm pin.

$46.00

Gedore
40 Z 68-75
6337200 Gedore 40 Z 68-75 Hook wrench with pin .240mm long, 6.0mm pin.

$46.00

Gedore
40 Z 80-90
6337390 Gedore 40 Z 80-90 Hook wrench with pin .280mm long, 6.0mm pin.
$56.30

Gedore
40 Z 95-100
6337470 Gedore 40 Z 95-100 Hook wrench with pin .280mm long, 8.0mm pin. $56.30

Gedore
40 Z 110-115
6337550 Gedore 40 Z 110-115 Hook wrench with pin .335mm long, 8.0mm pin. $84.80

Gedore
40 Z 120-130
6337630 Gedore 40 Z 120-130 Hook wrench with pin .335mm long, 8.0mm pin. $84.80

Gedore
40 Z 135-145
6337710 Gedore 40 Z 135-145 Hook wrench with pin .385mm long, 8.0mm pin. $107.50

Gedore
40 Z 155-165
6337980
Gedore 40 Z 155-165 Hook wrench with pin .385mm long, 8.0mm pin. $107.50

Gedore
40 Z 180-195
6338010 Gedore 40 Z 180-195 Hook wrench with pin .465mm long, 10.0mm pin. $266.70

Gedore
40 Z 205-220
633280 Gedore 40 Z 205-220 Hook wrench with pin .465mm long, 10.0mm pin. $266.70

.
WRENCH - 2 Pin Spanner
.

. PLEASE NOTE: On the type 44 pin spanners, the actual tool is not stamped with the size of the pin. The tool is stamped 44/7" or 44/9" meaning 7 inch long or 9 inch long. To determine the pin size, you must measure the pin! .

Gedore
44 3 Gedore 44 3 Caliper Face Spanners, 3mm pins, 7" long. (6354480)

$68.80
(Picture)

Gedore
44 4 Gedore 44 4 Caliper Face Spanners, 4 mm pins 7" long

$68.80
(Picture)

Gedore
44 5 Gedore 44 5 Caliper Face Spanners, 5mm pins, 9" long (VW tool 3212)

$79.10

Gedore
44 6 Gedore 44 6 Caliper Face Spanners, 6mm pins, 9" long

$79.10

Gedore
44 8 Gedore 44 8 Caliper Face Spanners, 8mm pins, 9" long

$82.60

.
WRENCH - Extra Long .

Gedore
7XL ..
Only Gedore makes this extra long pattern wrench! .

Gedore
7 XL 7
Code:1394916
Gedore 7 XL 7 Extra Long Combination Wrench, 7mm, 160mm long


Authorized Dealer	Samstag Sales is an Authorized Dealer of Gedore Tools. See our Dealer certificate signed by the Managing Partner Karen Dowidat! Contact us for a quote on any Gedore German Tool.
.	.

Gedore Tool Number	Description {click on the underlined price to see a picture}	Price
123	BEARING ASSEMBLY	123
Gedore 1.85/1	Gedore 1.85/1 Plastic bearing installation kit. Consists of 33 impact rings, 3 impact sleeves, bodywork hammer with nylon heads and plastic storage case.	$2,199.20 ☎ Call for your Discount Price.
Gedore 1.92/12	Gedore 1.92/12 Patented Ball Bearing Extractor PLUS Set. This set contains both 1.92/1 and 1.92/2. Using this set you can remove any shaft-mounted ball bearings in a housing without any problems. This tool is easy to use with legs that are fixed in the slot. The self-locking arrangement means the force is 100% applied and utilized and it is secure at all times against slipping off. This is a Patented system. This set is suitable for more than 40 standard ball bearings up to the 6311. 1.92/1 set is for bearings: 6000-6010; 6200-6205; 6300-6304 and 1.92/2 set is for bearings 6011-6012; 6206-6212; 6305-6311; 6403-6407. Code number: (1553550) Shipping direct from warehouse to you. Delivery time approximately 1 week.	$2,234.40 (Picture)

.	BLACKSMITH TOOLS	.
Gedore 233-300	Gedore 233-300 Wolf's Jaw blacksmith tongs, 300mm (12") long.	$92.10 (Picture)
Gedore 233-400	Gedore 233-400 Wolf's Jaw blacksmith tongs, 400mm (16") long.	$125.80
Gedore 233-500	Gedore 233-500 Wolf's Jaw blacksmith tongs, 500mm (20") long.	$146.30

.	BRAKE TOOLS	.
Gedore 234001	Gedore 1101-234001 Metric Tubing Double Flaring Tool Set. Included in this set are: 1 Basic Frame 1 Metric Clamping Jaw 6 Cones. 6.75-10mm 1 Cone 90° for flare types D+E 1 Miniature pipe cutter 4-16mm 1 Pipe deburring reamer 4-32mm 1 Sheet steel case. CALL for your Discount Price.	$1,056.70 (Picture)


.	BREAKER BARS	.
Gedore 1997	Gedore 1997 (6144910) 1/2" dr. breaker bar with swivel head. Around 381mm (15") in length. Black plastic grip.	$117.50 (Picture)

	CHISEL
Gedore 106	Gedore 106 Chisel and Punch set 6 pieces in plastic holder. With tool numbers 97-125; 97-150; 98-125; 99 12-3; 100-10; 119-4. Order Code: 8725200 97-125 Flat Cold Chisel, Tip is 12mm wide, 10mm shaft diameter, 125mm long 97-150 Flat Cold Chisel, Tip is 16mm wide, 12mm shaft diameter, 150mm long 98-125 Cross Cut Chisel, Tip is 5mm thick, 10mm shaft diameter, 125mm long 99 12-3 Drift Punch, Tip is 3mm thick, 12mm shaft diameter, 120mm long 100-10 Center Punch, Tip is 4mm, 10mm shaft diameter, 120mm long 119-4 Pin Punch, Tip is 4mm, 10mm shaft diameter, pin length is 50mm, overall length is 150mm	$67.90
108 UNI	Universal Hand Protector for Chisel. Hand Guard. For oval handle chisels 20x12, 23x13, 26x13, 26x7. Also for Octagonal handle chisels 14, 16, 18, 20. About 5" long. (8658500)	$10.30 (Picture)

.	COOLING SYSTEM	.
Gedore 614	Gedore 614 Anti-Freeze tester, marked in degree C. Special floating scale and measuring device allow reading an any angle! Large easy to read scale marked in degree centigrade. Other patented special features include a inflow duct that avoids bubble formation and hydrostatic lock to prevent fluid loss. Order Code: (6523770)	$119.40 (Picture)

.	ELECTRICAL TOOLS
Gedore 4522	Gedore 4522 (6690400) Electrician's Cable Knife, 50mm blade, overall length 180. Straight strong blade made of tempered steel, tough elastic plastic handle, VDE insulated up to 1000V.	$31.90
Gedore 4615 3	Gedore 4615 3 Voltage Tester, overall 140mm long. Rated for 220-250 Volts AC. Order Code: 6699110	$12.00

.	ENGINE	.
Gedore 36 Z-140	Gedore 36 Z-140 special V-Belt pulley Strap Wrench. For pulley up to 6". Code: 6320070	$175.00 (Picture)
Gedore 125 1	Gedore 125 1 Piston Ring Band Clamp. Working range 57mm-125mm, with hex key. Code: 6396800	$90.30 (Picture)
Gedore 133 D-150	Gedore 133 D-150 this tool is 260mm (10-1/4") long with a 22mm (7/8") wide tip. With a wood handle to give it the old world look. Code: 1395262	$27.40 (Picture)

.	HAMMERS	.
Gedore 600 H-300	Gedore 600 H-300 Engineers hammer, 300g. Order Code: (8583070)	$47.10
Habero 76 ST SP	Habero 76 ST SP Geologists' Hammer with pointed tip. 500g head, 300mm (12" long) handle. Limited Quantity Available	$157.61 (Picture)
Habero 76 ST SCH	Habero 76 ST SCH Geologists' Hammer with cutting edge. 500g head, 300mm (12" long) handle. Limited Quantity Available	$157.61 (Picture)
Gedore 224 E-60	Gedore 224 E-60 Plastic Head Hammer. Ash handles with exchangeable heads made from yellow shatter-proof cellulose acetate. The head has a 60mm diameter face, overall length 380mm. Order code: 8821940.	$73.80
Gedore 248 H-40	Gedore 248 H-40 Dead Blow Hammer. The head is 40mm diameter and filled with granulated weight. The whole thing weights about 1 pound 9 oz. It has white nylon replaceable heads. The handle is hickory wood and with the head it is about 14" long. It has a metal base painted silver with hammer-effect coating to give it an old world look. (8868580) ( Pic 2) ( Pic 3) ( Pic 4)	$91.40 (Picture)
Habero 600 H-300	Habero 600 H-300 Engineers' hammer. Rotband-Plus. Absolute safe join between the handle and the hammer head. Special high-quality steel. 425g head, 11" wooden handle.	$44.90

Gedore 600 H-500	Gedore 600 H-500 Engineers' hammer. Rotband-Plus. Absolute safe join between the handle and the hammer head. Special high-quality steel. 500g head, 11.5" Hickory Wooden Handle. (8583230).	$55.30 (Picture)
Habero E 600 H-500	Habero E 600 H-500 Spare handle for the 600 H-500 Engineers' Hammer. 320mm long. 198g. (8596480)	$19.80

.	IMPACT DRIVER	.
Gedore 1500 ES-K 1900	Gedore 1500 ES-K1900 Impact Driver Set. 1/2" Square Drive. 5/16" Hexagonal drive. (1402242) Set includes: K 19 10, K 19 13, K 19 14, K 19 17, K 19 19 - - Sockets. 880 7, 880 8, 880 9, 880 12 - - Flat Blade Bits. 885 5, 885 6, 885 8, 885 1 - - XZN Bits. 890 1, 890 12, 890 13, 890 14 - - Phillips Bits. KB 819 Adapter 1/2" square to 5/16" Hex. K1900 - Basic Impact Driver Tool with 1/2" drive.	$314.40 (Picture)

.	INTERNAL BEARING EXTRACTORS	.
.	Internal Extractor. Titanium nitride surface means its harder, more wear-resistant, has better surface protection, more heat-resistant, has a fine design, with fast compensation of temperature differences.	.
Gedore 1.34/1	Gedore 1.34/1 Internal Extractor 5 - 8.5 mm, code #1638556 Special Order	$186.20
Gedore 1.34/2	Gedore 1.34/2 Internal Extractor 8 - 15 mm, code #1638564 Special Order	$194.30
Gedore 1.34/3	Gedore 1.34/3 Internal Extractor 15 - 25 mm, code #1638572 Special Order	$204.40
Gedore 1.34/4	Gedore 1.34/4 Internal Extractor 25 - 36 mm, code #1638580 Special Order	$223.50
Gedore 1.34/10	Gedore 1.34/10 5-piece internal extractor set for closely-fitting ball bearings. To use with impact bearing extractor or support brace. Titanium-nitride surface, Contents in practical case: 4 internal extractors 1.34/1 (5-8.5 mm), 1.34/2 (8-15 mm), 1.34/3 (15-24 mm), 1.34/4 (25-36 mm), 1 impact bearing puller 1.35/0. M10 connecting thread. Special Order	$889.70
Gedore 1.35/1	Gedore 1.35/1 Impact bearing puller, suited for removal of small ball bearings, since there is often not enough room for support braces. For internal extractors 1.30/0-1.30/5 & 1.34/1-1.34/4. 230mm long and M10. Code: 8016070	$68.40

	MEASURING TOOLS
Gedore 708	Gedore 708 Torx Gauge. This tool is used to identify TROX sizes internal E4-E16, external size T10-T60. No need to guess at what size tool you need when you have this gauge. Code: (1394428)	$16.20

.	METAL WORKING	.
Gedore 350 5x120	Gedore 350 5x120 Octagonal Centre Punch, Chrome-Vanadium steel, DIN 7250. Blue enamel. No Longer Available, only 2 left in stock.	$13.65
Dako 426026	Dako 426026 Sheet Metal Nibbler. Cuts metal up to 1.2mm and plastic up to 2mm thick. No Longer Available, 1 left in stock.	$119.27 (Picture)

	NON-Sparking Tools
	Gedore now makes a complete line of Non-Sparking Tools. Call or email for more information.
		Price on Request
NON-Sparking Tools	{Click on the picture to see a large view}	CALL or Email

.	Oil Service	.
Gedore 1.75/1	Gedore 1.75/1 Oil filter claw, 1/2" drive, with 17mm outside. 60-120mm working range. Remove the adapter to access the 3/8" drive hole. Baldur. Made in Germany	$84.00 (Picture)
Gedore 37	Gedore 37 Universal Filter Wrench. For all standard oil filters and round screwed unions. 80-110mm wide, 285mm long. (6327670)	$107.50 (Picture)

Gedore 298-04	Gedore Germany 298-04 Oil Can, 300ml. Strong cast zinc container (Z 410, DIN 1743), with brass pump and aluminum spout. (Code No. 6390520). Angled Spout (ALU 00 220) - 165mm long. Single-acting brass pump with 2 ball valves. Ball bearing mounted and gravity controlled suction tub, enables container to be near completely emptied. Pump enables drip feed. Impact-proof, ergonomic design, high surface quality, sealing mechanism with drip collector pan. Dimensions LxWxH (mm): 335 x 230 x 120.	$112.20

.	Other Tools	.
Gedore 404	Gedore 404 Hacksaw, with PUK® 150mm blade, 11" long overall. Order Code: 6500480	$26.50 (Picture)

	PIN Punch - Parallel
Gedore 115	GEDORE Metric pin punch set. Perfect for the Gunsmith. This is the part number 115 set code (8756780). This set has 8 parallel pin punches in sizes .9mm, 1.4mm, 1.8mm, 2.4mm 2.8mm, 3.4mm 3.9mm, 5.9mm. These have a knurled shank, with the punches finely ground and polished. The points are made with 115CrV3 steel and hardened to 55-59HRC. The guide sleeve is moveable on the 7 smallest sizes.	$114.60 (Picture)

.	PIPE WRENCHES	.
	Type 100
Gedore 100-1	Gedore 100 1 Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form C. 48mm jaw opening. 320mm long. (4500140) Special Order Only!	$181.40
Gedore 100-1.1/2	Gedore 100 1.1/2 Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form C. 60mm jaw opening. 420mm long. (4500220) Special Order Only!	$227.20
Gedore 100-2	Gedore 100 2 Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form C. 80mm jaw opening. 550mm long. (4500300) Special Order Only!	$316.30
Gedore 100-3	Gedore 100 3 Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form C. 110mm jaw opening. 630mm long. (4500490) Special Order Only!	$487.60
	Type 175
Gedore 175-1	Gedore 175 1 Swedish Pattern Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form A. 44mm or 1" jaw opening. 320mm long. (6437340) Special Order Only!	$136.60 (Picture)
Gedore 175-1.1/2	Gedore 175 1.1/2 Swedish Pattern Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form A. 62mm or 1.1/2" jaw opening. 430mm long. (6437420) Special Order Only!	$205.90
Gedore 175-2	Gedore 175 2 Swedish Pattern Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form A. 76mm or 2" jaw opening. 580mm long. (6437500) Special Order Only!	$314.30
Gedore 175-3	Gedore 175 3 Swedish Pattern Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form A. 105mm or 3" jaw opening. 670mm long. (6437690) Special Order Only!	$403.50
Gedore 175-4	Gedore 175 4 Swedish Pattern Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form A. 130mm or 4" jaw opening. 760mm long. (6437770) Special Order Only!	$615.50
	Type 176
Gedore 176-1	Gedore 176 1 Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form B. 44mm jaw opening. 320mm long. (6438150) Special Order Only!	$113.40
Gedore 176-1.1/2	Gedore 176 1.1/2 Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form B. 62mm jaw opening. 430mm long. (6438230) Special Order Only!	$161.20
Gedore 176-2	Gedore 176 2 Pipe Wrench, Chrome Vanadium. Made to DIN5234, Form B. 76mm jaw opening. 580mm long. (6438310) Special Order Only!	$236.90

.	PLIERS - Adjustable
Gedore 142 10 TL	Gedore 142 10 TL Universal Adjustable Pliers with red handles, 255mm long (10" inch), 15 settings. Made in Austria. Order Code: 3076105	$54.54 (Pic 2)
Gedore 146 10 C	Gedore 146 10 C Universal Adjustable Pliers, 10 inches long, all chrome, box joint. Made in Austria.(6413240)	$94.70 (Picture)
183 10 JC	Gedore 183 10 JC Adjustable Plier Wrench. Can replace two complete open-ended spanner sets, metric and inch, gripping size 0-52mm/0-2", 250mm long. DIN ISO 5743. Made in Austria. (3066061)	SALE! $115.20 ~~$128.00~~

.	PLIERS - Circlip - Snap Ring	.
Gedore 8000 A 1	Gedore 8000 A 1 Circlip Pliers. For external retaining rings 10-25mm (3/8-1"), straight pattern. Clamping protection. 141mm long. (6701460)	$39.30
Gedore 8000 A 2	Gedore 8000 A 2 Circlip Pliers. For external retaining rings 19-60mm (3/4-2.3/8"), straight pattern. Clamping protection. 182mm long. (6701540)	$42.40
Gedore 8000 A 4 EL	Gedore 8000 A 4 EL Circlip Pliers. For external retaining rings. Straight tips 85-40mm (3.3/8-5.1/2"). Black handle with zinc-plated tips and lock lever. 550mm long. Code # 2011778	$224.70 (Picture)
Gedore 8000 A 5	Gedore 8000 A 5 Circlip Pliers. For external retaining rings. Straight tips 122-300mm (4.13/16-11.7/8"). Black handle with zinc-plated tips and lock lever. 550mm long. Code # 6701890	$217.20 (Picture)
Gedore 8000 A 6	Gedore 8000 A 6 Circlip Pliers. For external retaining rings. Straight tips 252-400mm (9.15/16-15.13/16"). Black handle with zinc-plated tips and lock lever. 550mm long. Code # 6701970	$245.40 (Picture)
Gedore 8000 A 0G (6700140)	Gedore 8000 A 0G Circlip Pliers. For external retaining rings. 30 degree tips. With brass gap stop adjustment screw. 140mm long. For Seeger circlips 1.5 - 3.5mm and Benzing clamping circlips 1.5 - 3.5mm.	$82.00 (Picture)
Gedore 8000 A 1G (6700220)	Gedore 8000 A 1G Circlip Pliers. For external retaining rings. 30 degree tips. With brass gap stop adjustment screw. 140mm long. For Seeger circlips 4 - 9mm and Benzing clamping circlips 3 - 11mm.	$82.00 (Picture)
Gedore 8000 A 2G (6700300)	Gedore 8000 A 2G Circlip Pliers. For external retaining rings. Straight tips. With brass gap stop adjustment screw. 182mm long. For Seeger circlips 10 - 15mm and Benzing clamping circlips 12 - 16mm.	$84.10 (Picture)
Gedore 8000 A 01G (6700650)	Gedore 8000 A 01G Circlip Pliers. For external retaining rings. 90 degree tips. With brass gap stop adjustment screw. 134mm long. For Seeger circlips 1.5 - 3.5mm and Benzing clamping circlips 1.5 - 3.5mm.	$82.00 (Picture)
Gedore 8000 A 11G (6700730)	Gedore 8000 A 11G Snap ring pliers. For external retaining rings. 90 degree tips. With brass gap stop adjustment screw. 134mm long. For Seeger circlips 4-9mm and Benzing clamping circlips 3-11mm.	$82.00 (Picture)
Gedore 8000 A 21 G (6700810)	Gedore 8000 A 21G Circlip Pliers. For external retaining clips. 90 degree tips. With bras gap stop adjustment screw. 170mm long. For Seeger circlips 10-15mm and Benzing clamping circlips 12-16mm.	$84.10 (Picture)
Gedore 8000 A 51	Gedore 8000 A 51 Circlip Pliers for external retaining rings, 90 degree bent tips, 125-300mm (4.15/16-11.7/8") rings. Overall length 560mm (22"). (6702860)	$202.00
Gedore 8000 J 0	Gedore 8000 J 0 (6703240R) Circlip Pliers for the Form C internal retaining rings. This size is the 8-13mm (3/8"-9/16") with straight tips. They are GEDORE chrome-vanadium steel with red handles. Made in Austria. Measure 141mm and weigh 80g.	$29.28
Gedore 8000 J 1	Gedore 8000 J 1 (6703320R) Circlip Pliers for the Form C internal retaining rings. This size is the 12-25mm (3/8"-1") with straight tips. They are GEDORE chrome-vanadium steel with red handles. Made in Austria. Measure 141mm and weigh 81g.	$30.88
Gedore 8000 J 2	Gedore 8000 J 2 (6703400R) Circlip Pliers for the Form C internal retaining rings. This size is the 19-60mm (3/4"-2 3/8") with straight tips. They are GEDORE chrome-vanadium steel with red handles. Made in Austria. Measure 183mm and weigh 164g.	$28.76
Gedore 8000 J 3	Gedore 8000 J 3 (6703590) Circlip Pliers for the Form C internal retaining rings. This size is the 40-100mm (1.5/8"-4") with straight tips. They are GEDORE chrome-vanadium steel with blue handles. Made in Austria. Measure 230mm and weigh 281g. This tool is popular with oilfield workers for use on wireline.	$37.74
Gedore 8000 J 4	Gedore 8000 J 4 (6703670R) Circlip Pliers for the Form C internal retaining rings. This size is the 85-140mm (3.3/8"-5.1/2") with straight tips. They are GEDORE chrome-vanadium steel with red handles. Made in Austria. Measure 322mm and weighs 472g.	$59.38
Gedore 8000 J 5	Gedore 8000 J 5 Circlip Pliers for internal retaining rings, straight tip, 125-300mm (4.15/16-11.7/8") rings. Overall length 565mm (22"). (6703750)	$230.10
Gedore 8000 J 6	Gedore 8000 J 6 (6703830) Circlip Pliers for internal retaining rings. This size is the 252-400mm (9.15/16"-15.13/16") with straight tips. They are GEDORE chrome-vanadium special hardened and tempered steel. Measures 575mm and weighs 1846g. Note: Ships USPS Large Flat Rate Box	$227.00 (Picture)
Gedore 8000 J 31	Gedore 8000 J 31 (6704560R) Circlip pliers (Red handle) for the Form D internal retaining rings. This size is the 40-100mm (1.5/8"-4") with 90° angled tips. They are GEDORE chrome-vanadium black tempered steel with red handles. Made in Austria. Measure 214mm (8-3/8") in length and weigh 279g.	$37.90
Gedore 8000 J 51	Gedore 8000 J 51 (6704720) Circlip Pliers for internal retaining rings. This size is the 122-300mm (4.13/16"-11.7/8") with 90º angled tips. They are GEDORE chrome-vanadium special hardened and tempered steel. Measures 575mm and weighs 1953g.	$241.00
Gedore 8000 J 61	Gedore 800 J 61 (6718510) Circlip Pliers for internal retaining rings. This size is the 252-400mm (9.15/16"-15.13/16") with 90º angled tips. They are GEDORE chrome-vanadium special hardened and tempered steel. Measures 579mm and weighs 1934g.	$203.90
Gedore 8005 J	Gedore 8005 J (6707230) Circlip Pliers for internal retaining rings. This size is the 305-500mm. Measure 705mm and weighs 9 lbs. *Special Order Only.	$999.90

	PLIERS- Replacement Tips

Gedore E-8000 A 5	Gedore E-8000 A 5 Set of 2 Replacement Tips for type 8000A5 snap ring pliers. 125-300mm rings. 3.5mm tips. (5701840)	$32.30
Gedore E-8000 A 6	Gedore E-8000 A 6 Set of 2 Replacement Tips for type 8000A6 snap ring pliers. 252-400mm rings. 4.5mm tips. Length 100mm (4")	$32.00 (Picture)
Gedore E-8000 A 51	Gedore E-8000 A 51 Set of 2 Bent Replacement Tips for type 8000A51 snap ring pliers. 125-300mm rings. 3.5mm tips. (5702810)	$32.00
Gedore E-8000 A 61	Gedore E-8000 A 61 Set of 2 Bent Replacement Tips for type 8000A61 snap ring pliers. 252-400mm rings. 4.5mm tips. (5701760)	$32.00 (Picture)
Gedore E-8000 J 5	Gedore E-8000 J 5 Set of 2 Replacement Tips for type 8000J5 snap ring pliers. 122-300mm rings. 3.5mm tips. Length 65mm (2-1/2") (5703700)	$27.40 (Picture)
Gedore E-8000 J 6	Gedore E-8000 J 6 Set of 2 Replacement Tips for type 8000J6 snap ring pliers. 252-400mm rings. 4.5mm tips. Length 74mm (2-15/16"). (5703890)	$27.40
Gedore E-8000 J 51	Gedore E-8000 J 51 Set of 2 Bent Replacement Tips for type 8000J51 snap ring pliers. 122-300mm rings. 3.5mm tips. (5704780)	$27.40 (Picture)
Gedore E 8000 J 61	Gedore E 8000 J61 Set of 2 Bent Replacement Tips for type 8000J61 snap ring pliers. 252-400mm rings. 4.5mm tips. (5702730)	$27.10


	PLIERS- Circlip - V -Grip
Gedore 8007	Gedore 8007 V-Grip Circlip Pliers. 305-1000mm range, tips 5.9mm. (3084493) More Info	Price on Request
Gedore 8006	Gedore 8006 X-Grip Circlip Pliers. 252-1000mm range, tips 4.5mm. (1394401) See LANG number 87 Pliers.	No Longer Available

	PLIERS- Combination German Pattern
Gedore 8210-160 JC	Gedore 8210-160 JC Combination Plier German pattern, Lay-on cutter box. DIN ISO 5746. 160mm long. (6731100) Special Order Only!	$59.10
Gedore 8210-180 JC	Gedore 8210-180 JC Combination Plier German pattern, Lay-on cutter box. DIN ISO 5746. 180mm long. (6731530)	$62.20
Gedore 8210-200 JC	Gedore 8210-200 JC Combination Plier German pattern, Lay-on cutter box. DIN ISO 5746. 200mm long. (6732180) Special Order Only!	$69.10
Gedore 8248-160 JC	Gedore 8248-160 JC Angled Combination Pliers. Angled plier head 60 degrees. For all wires including piano wire, 1.6mm. (2276585).	Price on Request

.	PLIERS - Electrical
Gedore 8097	Gedore 8097 (6702940) Automatic Stripping Pliers with v-shaped cutting knife. For stripping single-stranded conductors sizes 0.2 - 6.0 mm². Adjustable stripping length, with wire cutter up to 2mm.	$59.30
Gedore 8133-180 JC	Gedore 8133-180 JC (6722110) Multiple Pliers with cutting edge, serrated, straight pattern. For stripping wire of sizes 0.5/1.5/2.5mm², crimping of conductor end-sleeves 0.5-2.5²mm, squeezing of insulated flat plugs 1.0-2.5²mm.	$74.70

	PLIERS- Needle nose Pliers
Gedore 8132-140 JC	Gedore 8132-140 JC Needle Nose Pliers, wire cutter, serrated straight pattern. DIN ISO 5745. 140mm long. (6718860) Special Order Only!	$53.40
Gedore 8132-160 JC	Gedore 8132-160 JC Needle Nose Pliers, wire cutter, serrated straight pattern. DIN ISO 5745. 160mm long.	$56.70
Gedore 8132-200 JC	Gedore 8132-200 JC Needle Nose Pliers, wire cutter, serrated straight pattern. DIN ISO 5745. 200mm long. Special Order Only!	$60.20
Gedore 8133-180 JC	Gedore 8133-180 JC Triple Pliers, wire cutter, crimper, stripper, with serrated straight pattern tips. 180mm long. (6722110)	$74.70

	PLIERS- Sets
Gedore VDE S 8003 H	Gedore VDE S 8003 H Set of three pliers. The handles are VDE insulated sleeves. Includes the VDE 8250-180 H, VDE 8132-160 H and VDE 8314-160 H. The VDE 8250-180 H is 180mm while the VDE 8132-160 H and VDE 8314-160 H are 160mm. (1550594)	$195.80 (Picture)

	PLIERS- Side Cutter
Gedore 8314-125 JC	Gedore 8314-125 JC Side Cutter Swedish pattern. DIN ISO 5749. 125mm long. (6742300) Special Order Only!	$54.70
Gedore 8314-140 JC	Gedore 8314-140 JC Side Cutter Swedish pattern. DIN ISO 5749. 140mm long. (6742730)	$55.30
Gedore 8314-160 JC	Gedore 8314-160 JC Side Cutter Swedish pattern. DIN ISO 5749. 160mm long. (6743380)	$86.80
Gedore 8316-160 JC	Gedore 8316-160 JC Side Cutter American Pattern Pliers. Overall length 180mm, cutting length 22.6mm, max cutting capacity 1.4-2.0mm. (6744510)	$67.10

	PRY BARS
Gedore S 141-3	Gedore S 141-3 (1525476) Pry Bar set of 3. Hardened along the full length with plastic handle. Due to the size, this set could ship UPS Ground, depending on your location. Set Includes: 141-300 Tip size 11mm Length 300mm 141-390 Tip size 13mm length 390mm 141-600 Tip size 20mm Length 768mm	$127.90 (Picture)


	RATCHETS & ADAPTERS 1/4"	.
Gedore 2090-12	Gedore 2090-12 1/4" extra-long extension with ball-locking feature. 305mm in length. Chrome plated and polished. (6173340)	$26.80
Carolus 7226	Carolus 7226 Readyflex® Flex Head Bit Ratchet. With 7 locking positions. For 1/4" drive bits. With internal spring ball lock to hold the bit in place. Popular tool used for maintenance of the Hänel Storage Systems. Order Code: (1519662) No Longer Available. The new tool will be Gedore Red Code: 3300160 below.	$87.44 (Picture)
Gedore 3300160	Swivel head bit ratchet 1/4" reversible. Two component handle (2C). With 5 locking positions, magnetic holder, lever for reversible operation. In-hex for direct mounting of bits as per DIN 3126 - D 6.3 from the Gedore Red line of tools. Gedore order code 3300160 Gedore Red part number R40170027.	$79.99
Carolus 3300.02	Carolus 3300.02 Bit 1/4" drive 2mm hex bit (1852027) *No Longer Available. We have a few left in stock!	$2.99
Carolus 3300.03	Carolus 3300.03 Bit 1/4" drive 3mm hex bit (1513435) *No Longer Available. We have a few left in stock!	$2.99
Gedore 685 4	Gedore 685 4 (6539180) screwdriver bit for in-hex screws. The type 685 bit is for use in electric and air tools and also hand operation. 1/4" drive with a diameter 4.0mm and length of 25mm. Made of special vanadium steel and a gun-metal finish. *No Longer Available Individually, Few Left in Stock	$1.90
Gedore 685 5	Gedore 685 5 (6539260) screwdriver bit for in-hex screws. length of 25mm *No Longer Available Individually, Few Left in Stock	$1.90
Gedore 685 6	Gedore 685 6 (6539340) screwdriver bit for in-hex screws. length of 25mm *No Longer Available Individually, Few Left in Stock	$1.90
Gedore 685 8	Gedore 685 8 (6539420) screwdriver bit for in-hex screws. length of 33mm *No Longer Available Individually, Few Left in Stock	$2.80
Gedore 2094	Gedore 2094 (6170830) Square Coupler 1/4" inch . For hand-operated sockets and accessories. About 19.8 mm long.	$9.50