Horex German Precision Measuring Tools

USA Phone : (615) 735-3388
Samstag Sales Fine German Hand Tools
Samstag Sales is an authorized distributor of HELIOS-PREISSER and Horex. To see a picture of a tool, click on the price in the price list. Items with underlined prices have a picture.  Our stock changes frequently, please email for availability. Many items are special order. Please email for a quote on any HELIOS-PREISSER tool not listed here. 
PLEASE NOTE
: Preisser will phase out the HOREX brand, new tools will carry the HELIOS-PREISSER brand.
HOME
Quick Search
SEARCH
email Samstag
How to order
Web Special
 Please Note: Our shopping cart is available for your convenience. The shipping is a flat rate calculated by value.  Contact us for more shipping options.  ( Click for Shipping Rates & Info)
Last Update April 20, 2017

You can search for a Horex tool on this page by using your web browser's find feature. For example, if you are using Internet Explorer 8, you can click on Edit in the menu bar at the top of the page, then click on (Find on this page), and type in what you want to find. A fast way to bring up the search box is to hold down the (CTRL) key and type the letter "F". 
Quick
Search

  .
Horex Web Special !!
HOREX 2904 108 Schweizer Watchmaker's magnifying glass. High quality with very good clarity. 15X Power. 16mm diameter lens. 



Buy this tool now at!
$39.99 $19.99!!
To order the Horex Web Special use the handy shopping cart button, call (615) 735-3388 or email us!!
4.20.17

.
Number
Description
{Click on price to see a picture}
Price
123425
. .
*********
123
Angle Gauge
Lilo
HELIOS-PREISSER
0417 608
HELIOS-PREISSER 0417 608 Angle Gauge Protractor 'Pernumeter'. Reading 1/4 degree. Fixed vernier & moveable scale, 100mm base. Can be used for suspension alignment. Special Order Only!

Price on
Request
.
Brake Disc Gauge
.
HELIOS-PREISSER
0253 301

HELIOS-PREISSER 0253 301 Brake disc caliper gauge. Made of special steel with satin chromed reading parts. Locking screw. Jaw length 50mm. Measures 0-50mm. Accuracy 0.1mm. Replacement for old Horex Number 2240 104.

  1. The small measuring block and thumb screw at the top right is used to lock the reading.
  2. Make sure the screw is just loose so the block can slide.
  3. Open the arms wide and put the tips on either side of the disc, at the place you want to measure.
  4. Slide the arms together, leaving the gap between the arm and the measuring block. The measuring block should be pulled along by the pin.  But keep the gap!
  5. Once the measuring tips touch the disk, tighten the thumb screw to lock the reading. You can then slide the arms open and easily remove them without disturbing the reading.

$175.50
(Picture)
.
Caliper - Micrometer
.
HOREX
2202 410
HOREX 2202 410 Vernier Pocket Caliper. Economy "Columbus" model. Working range 110mm (4"-1/4") with locking screw. Reading accuracy .01mm or 1/128". Nickel plated metal with etched markings. No longer available in this size. We have a few left. Similar to Preisser Number 0185 501

$19.99
(Picture)

HOREX
2228 201
HOREX 2228 201 Caliper - Micrometer set in a wooden storage case. Includes a stainless steel vernier pocket caliper number 2224-516 with 150mm range, a number 2304-510 carbide tip outside micrometer with .01mm reading and 25mm range. A great starter set for your workshop.
$98.50
(Picture)
Helios
0313
Helios Type 0313 Outside Calipers with hardened points & quick acting set screw. Available size, 100mm, 150mm, 200mm, 250mm, 300mm.


Price on
Request
(Picture)
.
Depth Gauge
.
HOREX
0999 972
HOREX 0999 972 Miniature Depth Gauge. All Brass. Made in Germany. 100mm long by 50mm wide at the working end. Vernier Reading in MM. Also reading in 1/16". Measuring depth 65mm (2 1/2").
 Discontinued, we have 1 left. 
For a digital version, refer to Preisser Number 1375 502
 
$29.99
(Picture)
HOREX
2248 522
HOREX 2248 522 Stainless Steel Depth Gauge, range 300mm. Length of base 125mm.
Similar to Preisser Number 0292 502 , and similar to old VW number US 1018

 
(Picture)
.
Dial Gauge
.
Helios
0710 195
Helios - Preisser 0710 195 Dial gauge extension pin 3mm. Metric mounting thread M2.5x.45 millimeters.

$9.99
(Picture)

Preisser
0710 197
Preisser 0710 197 Dial gauge extension pin 6mm. Metric mounting thread M2.5x.45 millimeters.


$9.99
(Picture)

HOREX 
2706 101
HOREX 2706 101 Dial Indicator, 40mm face, 0-5mm travel, .01mm reading. Stem size 8mm h 6. For setting diesel injection pump timing.  To be discontinued. limited quantity.
$69.50
(Picture)
HOREX
2706 102
HOREX 2706 102 Dial Indicator, 58mm face, 0-10mm travel, .01mm reading. Stem size 8mm h 6.
To be discontinued. limited quantity.


$59.99

Dynamometers

HOREX
Dynamometers
Type  2734
From .1 Kg to 60Kg
Cylindrical Dynamometers for measureing in Kg. The tube, covers, ring, and hook are nickel coated.
Made in Germany. NO Longer Available. A few sizes are left in Germany.

Price on
Request
.
Feeler Gauge
.
HELIOS
0606 133
HELIOS 0606 133 Metric Feeler Gauge Set. Width 10mm, length 100mm. With 21 Blades of the following sizes: .05mm, .10mm, .20mm, .30mm, .40mm, .50mm, .60mm, .70mm, .80mm, .90mm, 1.00mm, 1.10mm, 1.20mm, 1.30mm, 1.40mm, 1.50mm, 1.60mm, 1.70mm, 1.80mm, 1.90mm, 2.00mm.  Same as old HOREX 2608 105


$24.99
(Picture)

Feeler Gauge - Brass

Helios
0607 402
Helios 0607 402 Brass Metric Feeler gauge set. Width 10mm tapered, length 100mm. With 13 blades in the following sizes: .05mm, .10mm, .15mm, .20mm, .25mm, .30mm, .40mm, , .50mm, .60mm, .70mm,  .80mm,  .90mm,  1mm. Made with BRASS. Due to the non-magnetic characteristic of brass it is used for ABS brake sensor adjustment. Similar to Horex Number 2614 364 

$29.99
Helios
0607 403
Helios 0607 403 Brass Metric Feeler gauge set. Width 10mm tapered, length 100mm. With 20 blades in the following sizes: 05mm, .10mm, .15mm, .20mm, .25mm, .30mm, .35mm, .40mm, .45mm, .50mm, .55mm, .60mm, .65mm, .70mm, .75mm, .80mm, .85mm, .90mm, .95mm, 1mm.  Made with BRASS. Due to the non-magnetic characteristic of brass it is used for ABS brake sensor adjustment.
Similar to old Horex Number 2614 374

$47.50
(Picture)
Feeler Gauge Tape

Preisser
0611 190
Preisser 0611 190 Feeler Gauge Tape Set. Set of 15 tapes, each 12.7mm wide x 5 meter long. With size .30mm, .35mm, .40mm, .45mm, .50mm, .55mm, .60mm, .65mm, .70mm, .75mm, .80mm, .85mm, .90mm, .95mm, 1.00mm. It also has a Feeler Gauge Tape Holder included. With a sturdy wall mounting storage rack with mounting screws. Size 330mm x 210mm x 220mm.  Note: Call or email with your shipping address for a total. Shipping 25 Pounds.
     
$999.99
Helios
0611 300
Helios 0611 300 Feeler Gauge Tape (.005mm) 5m roll. Width of 12.7mm, thickness .005mm "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140. *Special Order
$147.72
Helios
0611 501
Helios 0611 501 Feeler Gauge Tape (.01mm)  5m roll. Width of 12.7mm, thickness .01mm "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140." Similar to old Horex Number 2610 601

$67.50
(Picture)
HOREX
2610 602
HOREX 2610 602 Feeler Gauge Tape (.02mm5m roll. Width of 13mm, thickness .02mm "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140."
Similar to Preisser Number 0611 502
$57.00
(Picture)

HOREX
2610 603
HOREX 2610 603 Feeler Gauge Tape (.03mm) 5m roll. Width of 13mm, thickness .03mm "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140."
Similar to Preisser Number 0611 503
$26.50
HOREX
2610 604
HOREX 2610 604 Feeler Gauge Tape (.04mm) 5m roll . Width of 13mm, thickness .04mm "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140."
Similar to Preisser Number 0611 504
$26.50
Helios
0611 505
Helios 0611 505 Feeler Gauge Tape (.05mm) 5m roll. Width of 13mm, thickness .05mm "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140."
Similar to Horex Number 2610 605
$24.99
Helios
0611 506
Helios 0611 506 Feeler Gauge Tape (.06mm) 5m roll. Width of 13mm, thickness .06mm "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140."
Similar to Horex Number 2610 606
$24.99
Helios
0611 510
Helios 0611 510 Feeler Gauge Tape (.10mm) 5m roll. Width of 13mm, thickness .10mm. "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140."
Similar to Horex Number 2610 610
$24.99
Helios
0611 515
Helios 0611 515 Feeler Gauge Tape (.15mm) 5m roll. Width of 13mm, thickness .15mm. "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140."
Similar to Horex Number 2610 611
$29.99
Helios
0611 520
Helios 0611 520 Feeler Gauge Tape (.20mm) 5m roll. Width of 13mm, thickness .20mm. "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140."
Similar to Horex Number 2610 612

$34.99
Helios
0611 525
Helios 0611 525 Feeler Gauge Tape (.25mm) 5m roll. Width of 13mm, thickness .25mm. "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140."
Similar to Preisser Number HOREX 610 613
$34.99
HOREX
2610 614
HOREX 2610 614 Feeler Gauge Tape (.30mm) 5m roll. Width of 13mm, thickness .30mm. "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140." Large plastic storage box 202 x 202mm. Similar to Preisser Number 0611 530
$64.99
(Picture)

Helios
0611 530
HELIOS 0611 530 Feeler Gauge Tape (.30mm) 5m roll. Width of 12.7mm.  "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140." Large plastic storage box 202 x 202mm.  $47.50
Helios
0611 535
HELIOS 0611 535  Feeler Gauge Tape (.35mm) 5m roll. Width of 12.7mm.  "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140." Large plastic storage box 202 x 202mm.
$49.00
Helios
0611 540
HELIOS 0611 540 Feeler Gauge Tape (.40mm) 5m roll. Width of 12.7mm.  "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140." Large plastic storage box 202 x 202mm.
$53.50
Helios
0611 545
HELIOS 0611 545 Feeler Gauge Tape (.45mm) 5m roll. Width of 12.7mm.  "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140." Large plastic storage box 202 x 202mm.
$54.99
Helios
0611 550
HELIOS 0611 550 Feeler Gauge Tape (.50mm) 5m roll. Width of 12.7mm.  "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140." Large plastic storage box 202 x 202mm.
$59.00
Helios
0611 552
HELIOS 0611 552 Feeler Gauge Tape (.55mm) 5m roll. Width of 12.7mm.  "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140." Large plastic storage box 202 x 202mm.
$59.99
Helios
0611 554
HELIOS 0611 554 Feeler Gauge Tape (.60mm) 5m roll. Width of 12.7mm.  "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140." Large plastic storage box 202 x 202mm.
$61.50
Helios
0611 556
HELIOS 0611 556 Feeler Gauge Tape (.65mm) 5m roll. Width of 12.7mm.  "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140." Large plastic storage box 202 x 202mm.
$63.00
Helios
0611 558
HELIOS 0611 558 Feeler Gauge Tape (.70mm) 5m roll. Width of 12.7mm.  "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140." Large plastic storage box 202 x 202mm.
$64.50
Helios
0611 560
HELIOS 0611 560 Feeler Gauge Tape (.75mm) 5m roll. Width of 12.7mm.  "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140." Large plastic storage box 202 x 202mm.
$65.00
Helios
0611 562
HELIOS 0611 562 Feeler Gauge Tape (.80mm) 5m roll. Width of 12.7mm.  "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140." Large plastic storage box 202 x 202mm.
$65.99
Helios
0611 564
HELIOS 0611 564 Feeler Gauge Tape (.85mm) 5m roll. Width of 12.7mm.  "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140." Large plastic storage box 202 x 202mm.
$67.50
Helios
0611 566
HELIOS 0611 566 Feeler Gauge Tape (.90mm) 5m roll. Width of 12.7mm.  "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140." Large plastic storage box 202 x 202mm.
$69.99
Helios
0611 568
HELIOS 0611 568 Feeler Gauge Tape (.95mm) 5m roll. Width of 12.7mm.  "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140." Large plastic storage box 202 x 202mm.
$73.25
Helios
0611 570
HELIOS 0611 570 Feeler Gauge Tape (1.00mm) 5m roll. Width of 12.7mm.  "Made with type C100S spring band steel. Tolerance according to DIN 1544R/1544 F or EN 10140." Large plastic storage box 202 x 202mm.
$75.00
Helios
0611 195
 Helios 0611 195 Holder for feeler gauge tape. About 120mm (4-3/4") long. For 13mm wide tape or feeler blades. Spring loaded. Holding range is 0-1mm thick feeler gauge.
Similar to HOREX # 2612 101

$6.93
(Picture)

Go-No-Go Thread Gauge

HOREX
2668

SEE Heios Preisser type
0658 Gauges

HOREX Type 2668 available in Double End Go-No-Go Thread Plug Gauge and Go Thread Ring and NOGO Thread Ring Gauge. Metric size available 1.0, 1.4, 1.6, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, 6.0, 8.0, 10, 12, 14, 16, 18, 20, 22, 24, 27, 30, 33, 36, 42, 45, 48mm.

Price on Request
.
. .
.
Knife Edge, Precision Straight Edge .
Helios
0512 201
Helios 0512 201 Precision Straight Edge, 75mm (3" inches) long. Cross Section 22x6mm. Made to DIN 874 Standard Grade 00, Stainless Steel. With vinyl storage pouch.








$47.50
Helios
0512 204
Helios 0512 204 Precision Straight Edge, 150mm (6" inches) long. Cross Section 22x6mm. Made to DIN 874 Standard grade00, Stainless Steel. With vinyl storage pouch.








$69.99
Helios
0512 205
Helios 0512 205 Precision Straight Edge, 200mm (8" inches) long. Cross Section 29x7mm. Made to DIN 874 Standard Grade 00, Stainless Steel, Thermal insulated handle.

$84.50
Helios
0512 206
Preisser 0512 206 Precision Straight Edge, 300mm (12" inches) long. Cross Section 30x7mm. Thermally insulated. Made to DIN 874 Standard Grade 00, Stainless Steel. With vinyl storage pouch.
  
$117.00
(Picture)
Helios
0512 207
Helios 0512 207 Precision Straight Edge, 400mm (16" inches)  long. Cross Section 40x7mm. Made to DIN 874 Standard Grade 00, Stainless Steel, Thermal insulated handle. Special Order Only!!
$239.00

Machine Level

Helios Preisser
Machine Levels
Machine Level type 0550 made to DIN 877 German Standard. V-groove in the base. Thermally insulated.  Available in size 160mm to 300mm and range (.02mm/m) (.1mm/m) (.3mm/m).

More Info
Price on
Request
.
Nozzle Gauge
.
HOREX
2606 601 
HOREX 2606 601 Metric Nozzle Gauge 20 blade-steel pins in a red plastic handle. Sizes Include: .45mm, .50mm, .55mm, .60mm, .65mm, .70mm, .75mm, .80mm, .85mm, .90mm, .95mm, 1.00mm, 1.05mm, 1.10mm, 1.15mm, 1.20mm, 1.25mm, 1.30mm, 1.40mm and 1.50mm.
Similar to Preisser Number 0599 151

$19.99
(Picture)
HOREX
2606 602
HOREX 2606 602 Metric Nozzle Gauge 16 blade-steel pins in a red plastic handle. 1.50mm, 1.60mm 1.70mm, 1.80mm, 1.90mm, 2.00mm, 2.10mm,  2.20mm, 2.30mm,  2.40mm,  2.50mm, 2.60mm, 2.70mm, 2.80mm, 2.90mm, 3.00mm. Similar to Preisser Number 0599 152
$19.99
(Picture)
.
Optics
.
HOREX
2904 102
HOREX 2904 102 Schweizer Watchmaker's magnifying glass. High quality with very good clarity. 3X Power. 25mm diameter lens. *To Be Discontinued.
$17.99
(Picture)
HOREX
2904 104
HOREX 2904 104 Schweizer Watchmaker's magnifying glass. High quality with very good clarity. 5X Power. 25mm diameter lens. *To Be Discontinued.
$24.99
HOREX
2904 106
HOREX 2904 106 Schweizer Watchmaker's magnifying glass. High quality with very good clarity. 10X Power. 25mm diameter lens. *To Be Discontinued.
$29.99
HOREX
2904 108
HOREX 2904 108 Schweizer Watchmaker's magnifying glass. High quality with very good clarity. 15X Power. 16mm diameter lens. 


$39.99
(Picture)

.
RRad Radius Gauge Sets
.
HOREX
2616 166
HOREX 2616 166 Metric Concave and convex radius gauge set with lock nut. 17 blades, sizes 1.0- 7.0mm
$21.79
(Picture)
HOREX
2616 268
HOREX 2616 268 Metric Concave and convex radius gauge set with lock nut. 16 blades, sizes 7.5 - 15.0mm

 $29.99
(Picture)
HOREX
2616 270
HOREX 2616 270 Metric Concave and convex radius gauge set with lock nut. 15 blades, sizes 15.5- 25mm
$29.99
(Picture)
.
Screw Pitch Gauge
.
HOREX
2618 101
HOREX 2618 101 Metric Screw Thread Pitch Gauge. This set has 24 blades with metric sizes. This gauge will check metric threads from .25 to 6mm. Similar to Preisser Number 0605 101

$11.50
HOREX
2618 103
HOREX 2618 103 Whitworth Pipe Thread. 6 blades. 8-28. Similar to Preisser Number 0605 104
$7.99
HOREX
2618 109
HOREX 2618 109 Screw Pitch Gauge. US 60 degree SAE threads. Similar to Preisser Number 0605 109
$8.25
(Picture)
HOREX
2618 112
HOREX 2618 112 Screw Pitch Gauge. BSF threads. Size 4-26 . Similar to Preisser Number 0605 112
$9.99
(Picture)

Scribe

HOREX
2560 120
HOREX 2560 120 Metal Scribe. Made with Chrome Vanadium Steel. With 8mm diameter knurled handle. Straight and angled ends with sharp tip for marking metal. 250mm long.
Similar to Preisser Number 0300 008

$12.99

Ruler

HOREX
2430 218
HOREX 2430 218 Flexible Metric Rule 200mm long. Stainless steel EEC class II. With mm graduations on top and bottom. 13mm wide with 1mm divisions. Delivered in a plastic sleeve. Similar to Preisser Number 0460 202
$3.99
(Picture)
HOREX
2430 216
HOREX 2430 216 Flexible Metric Rule 150mm long. Stainless steel EEC class II. With mm graduations on top and bottom. 13mm wide with 1mm divisions. Delivered in a plastic sleeve. Similar to Preisser Number 0460 201
$3.99
.
Telescopic Hole Gauge

HOREX
2664 394
HOREX 2664 394 Telescopic hole gauge set. With 6 tools in a plastic storage pouch. Surfaces are hardened and ground. With 6 letter sizes:
A-  8 to 12.7 mm ( 5/16-1/2")
B- 12.7 to 19mm (1/2-3/4")
C- 19 to 32mm (3/4-1 1/4")
D- 32 to 54mm (1 1/4-2 1/8")
E- 54 to 90mm (2 1/8-3 1/2")
F- 90 to 150mm (3 1/2-6")
NO LONGER AVAILABLE

$89.95
HOME Quick Search
SEARCH
email Samstag How To Order Web Special
Copyright © 1997-2017  Samstag Sales