BUY
- SELL
( Offers from Customers to Buy
or Sell Used Equipment)
USA Phone: (615) 735-3388
Carthage, TN 37030 USA
Carthage, TN 37030 USA
|
BUY
- SELL
( Offers from Customers to Buy
or Sell Used Equipment)
USA Phone: (615) 735-3388
Carthage, TN 37030 USA |
| HOME | Quick Search |
SEARCH | eMail Samstag | How To Order | About Us |
| Tools and diagnostic equipment can be
expensive. Some of the old equipment is no longer available. On this
page you will find a list of used equipment for sale by some of our customers. In some cases
Samstag Sales will offer it for sale. And we list equipment that
customers are
looking for. Please contact us if you need to buy equipment, or
you have equipment for sale. We
will put you in contact with the buyer or seller. At this time we
only
accept offers to sell from our established customers. All
equipment is subject to prior
sale. Call or email for current status. Please Note: any pictures you
send us must be of the actual item you have for sale, and a picture you
took. Samstag Sales is not involved in any 3rd party
transaction. We function as a classified advertising service only.
Occasionally customers call and say their tools were stolen. If this
happens to you we can put a note on this page to help catch the thieves. |
||
| Quick
Search |
Audi BMW Books Collectibles Gear Puller HAZET Kent-Moore King Dick |
Mercedes Motometer Porsche Tools Volkswagen Volvo |
| ************** |
BMW | |
| Isetta |
WANTED Original Hazet Tool Kit for the 1957 BMW Isetta. | $$$ |
| Books | ||
| Ford
Shop |
For
SALE Henry Ford Trade School hard bound book.
SHOP THEORY. Published by McGraw-Hill copyright 1934, 1941, 1942. Some
writing inside. A great book showing old tools and how to use them.
8-1/2"x11" with 267 pages. For sale by Samstag Sales.
 |
Asking $25.00 |
| The Arms of Krupp |
For
SALE Book. The Arms of Krupp. Used Copy 1968
edition. German steel is famous all over the world. Here is a history
of the Krupp family and the German Steel Business. A somewhat one-sided
work which some reviews claim is full of errors. Very entertaining
reading none the less. |
Asking $15.00 |
| Collectibles |
||
| Village Blacksmith Meat Cleaver |
For
SALE Here
is an old meat cleaver made by the Village Blacksmith Company of
Watertown Wisconsin. This is the Lexington model number 208. Some
surface rust and lots of wear on the handle. It has an 8" inch blade,
with an overall length of 14" inches. For sale by Samstag Sales. Email or call
with your address for a shipping quote. Shipping weight 4 pounds.
 |
For
SALE $50.00 |
| Gear
Puller |
||
Red Case Gear Puller Set |
For
SALE No Name Gear Puller Set. Used. Unknown
application, maybe for some special transmission work. These tools are
not marked with a brand. The case is stained, and one tool may be missing from the set. This set
includes a 2 arm puller with about a 5 inch reach and 7 inch spread.
There is one small arm. And 2
seal drivers. Not sure what the horseshoe shaped wrench is for, but it
is marked "Torque Shaft Nut to 15 Lbs. Ft. " Supplied AS-IS. No
Warranty. For sale by Samstag Sales. For sale $149.99 Shipping by UPS GND. If you are outside
the 48 states, please email for a shipping quote.    |
For
SALE $149.99 |
| HAZET | ||
| HAZET | WANTED Any old HAZET Tools. |
$$$ |
| Kent-Moore | ||
| J-29642-10 | For
SALE Jeep Air
Conditioning Service Valve Alignment Tool. With 1" jaw. Marked K.M.
USA. Made by Kent-Moore. Chrome,
good used condition. One customer suggested this could also be
for GM Engine Valve Adjustment. For
sale by Samstag Sales. |
Asking $50.00 |
| Kent-Moore J-6335 |
SOLD! Special T-Handle Pry
Tool. Old and Used.
Application Unknown. For sale
by Samstag Sales.
 |
Asking $15.00 SOLD! |
| King
Dick |
||
| King
Dick ODW207 |
For
SALE Used King Dick
Double Open end Whitworth
Spanner. Also marked A705. Whitworth size
7/16W x 1/2W same as British Standard 1/2BS x 9/16BS. British
Made.
Chrome Vanadium Steel and Chrome Plated. Some wear but overall in nice condition. Please note: This is not Metric, it is not Inch, it is old British Whitworth size. As used on old Rolls Royce, Jaguar, etc. If you need to buy new Whitworth tools, visit our Whitworth page, just click here. For sale by Samstag Sales.  |
For
SALE $24.99 |
| MERCEDES | ||
| BOSCH | WANTED BOSCH Bosch KDJE-P 600 Tester Lambda Control |
$$$
|
| Hermann L115 |
LOOKING Lambda Tester used on
Mercedes. Used Working.
 |
Looking for one. |
| Mercedes 000 589 21 07 22 |
For
SALE Here is a USED HAZET 12
point socket with universal joint. This is for screwed connection at
the fuel injection pump on Mercedes-Benz with the engine types 615,
616. It is 3/8" drive. This is the HAZET type 2742-13 wrench. This is
the same as Mercedes part number 000 589 21 07 22 Overall length of
240mm. Here is a chance to get the correct socket for the job and
save money too! This socket is marked with the Mercedes number and
Mercedes Logo. This socket is in very good used condition. Shows signs
of previous use. Some lettering has been etched out by previous owner.
New List Price is $163.93 on this fine tool. For
sale by Samstag Sales.
  |
For
SALE $49.99 |
| 115 589 42 63 00 |
WANTED Wheel Cover Masking Tool. Original
Mercedes. |
$$$ |
| 126 589 00
37 00 |
 For
SALE Here is a used Mercedes Benz special tool.
It is good for removal and installation of the retaining rings in rear
axle center piece housing after spreading. Listed for Mercedes Model:
123, 124, 126, 129, 201, 202. Used with 168mm and 185mm diameter ring
gear. This is a specially modified KNIPEX brand J4 size snap ring
plier. It has a lock ring that will slide along the handle and rest in
a notch to lock the tool in place. About 300mm (12") long overall. This
tool is in very good used condition. Made in Germany! For sale by
Samstag Sales.
|
Asking
$59.00 |
| 201 581 02 46 |
For
SALE Used Mercedes Wrench. Offset 19mm box end, 17mm open
end. Some chrome wear but overall in usable condition. For sale by Samstag Sales.
 |
Asking $25.00 |
| Sir Tools M0067 |
For
SALE Sir Tools M0067 Valve Spring Compressor. For
old 6 cylinder engine type 110.92 /98 /99
USED for 1 Job, in good
condition.  |
Asking $140.00 |
| . |
MOTOMETER | . |
| Motometer | For
SALE Here is an old MotoMeter plastic case. It
is empty. It would have held a Motometer Gas Engine Compression Tester.
These testers were standard equipment for Mercedes-Benz dealers. This
case would look great next to your old Mercedes. It is 380mm wide
x 280mm High x 75mm Deep. It has a few scratches with color missing on
the logo, but overall a very nice piece. It has the old logo and
is marked "Made in West Germany". For sale by Samstag Sales.
 |
Asking $75.00 $50.00 |
| PORSCHE | ||
| P74 | WANTED
Original Porsche screwdriver
socket for oil pressure safety valve on type 356. |
$$$ |
|
TOOLS
|
||
| Greenlee 452 Screwdriver |
For
SALE Used Greenlee Spiral
Ratchet Screwdriver with removable tip. Flat blade tip included. Used in very good condition.
About 15" inches long with bit installed and fully collapsed. Stainless
Steel tubes. Made in USA. Very high quality and hard to find. For sale by Samstag Sales.
 |
For
SALE $59.99 |
| HM 17x19mm Wrench |
For
SALE Honda Motors. Vintage
Double Open End Wrench. 17x19mm. Used in good condition. Marked 4A2. RK
A.  |
Asking $17.50 |
| PADRE 295 |
For
SALE Padre
Carburetor Stubby Reversible Screwdriver model 295 with a red
plastic handle and reversible blade. One end has a phillips #2 tip, the
other end is 6mm wide flat blade. The screwdriver is only 3 1/4 inches
long with the blade installed. Shaft length is 40mm and the handle
measures 55mm. For sale by Samstag Sales. We
have a few in stock. Call or eMail to add to your order.
Or use the shopping cart
button below. Only $3.29
each!
 |
$3.29 |
| Wheel Lock #354 |
For
SALE Wheel
Lock Nut Socket. Application Unknown. Probably an older American car.
Marked on the end with # 354. With 2 hex sections 3/4" and 13/16"
inch for use with a lug wrench. Outside diameter 1-1/16"
inch. For sale by Samstag Sales.
 |
For
SALE $ 2.49 |
| Tullen Snips New Zealand Patented |
For
SALE Tullen Snips. Made in New
Zealand. About 7-1/2" long. Used with some rust spots. Bright orange
plastic handles. An original old
pair from the folks that invented this type of snip. The handles are
covered with patent numbers. Very interesting history. We only have
this one. For sale by Samstag Sales,
 |
For
SALE $14.99 |
| VOLKSWAGEN |
||
| VW204 |
WANTED
Old tool used to install
Crankshaft Oil Seal. Air Cooled VW |
$$$ |
| VW224a |
WANTED
Original Volkswagen King Pin
Bushing Reamer. Reamer 40mm long with 2 guides. 24mm. |
$$$ |
| VW261 |
For
SALE. VW261 protractor-torsion
bar, for old VW. New Old Stock.
 |
Asking $425.00 |
| VAG 1274 SOLD! |
SOLD!
. VAG 1274 Old Model
Cooling System Tester. Used very little. Some corrosion on the metal
adapter. This model is no longer available from VW.
 |
SOLD!
Asking $150.00
|
| VAG 1367 | WANTED
Ignition Tester |
$$$ |
| VAG 1551 |
For
SALE.
VAG 1551 Diagnostic System, with wire lead VAG1551 & VAG 1551/3.
User Manual and Spare Paper Rolls. Asking $1000.00 |
Asking $1000.00 Click for More Info |
| VAS5051-2 |
For
SALE Diagnostic System Adapter
Cable. For old VW's. For Sale by Samstag Sales
 |
Asking
$50.00
|
| VW112 | WANTED VW112 Special Wrench 36 mm with guide plate for loosening flywheel gland nut. Old Air Cooled VW. | $$$ |
| VW292 | WANTED VW292 gauge for checking crankshaft end play. Old Air Cooled VW. | $$$ |
|
VOLVO
|
||
| Volvo 981 3100 |
SOLD! . Volvo system Tester 981 3100. FOR PARTS ONLY. Untested.
Missing an important cable. No Warranty. Sold AS-IS. For Sale by Samstag Sales. ................. SOLD! |
Asking $500.00 SOLD! Click for More Info |
|
Volvo
KL-0122-327 |
For
SALE Here is a brand new KLANN Oil
Filter Wrench. This oil filter wrench is 3/8" drive and made of heavy
duty all-metal construction. For Volvo 850 TDI Turbo Diesel. Also C70,
S70, V70 TDI Turbo Diesel. It is 108mm diameter with 15 Flats. Please
inspect your filter before buying this tool. We
have one left at this price.
|
On Sale
$19.99 |
| For SALE WANTED SOLD! OFFERED FOUND ! LOOKING STOLENNSTOLEN |
| HOME | Quick Search | SEARCH | eMail Samstag | How To Order |
|
